Question about Linksys WRT160N Wireless Router

Open Question

ErrorCode 1114 unable to load Module D:\issetup.dll

Posted by on

  • JDTec
    JDTec May 11, 2010

    are you attempting to install the cd that came with the router?

×

2 Suggested Answers

Joed911
  • 4338 Answers

SOURCE: Unable to load install CD

Router setup
You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Dec 26, 2008

Joed911
  • 4338 Answers

SOURCE: I have a WRT160N and

Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe




Posted on Jan 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I receive error message exception GIFException in module aviWUSB54GC.dll at 000252AF


It is highly recommended you download the best PC optimization tool. Just follow these 4 easy steps here; you can easily fix any PC errors and speed up your computer in just minutes:
  • 1. Free Download the PC Tune-Up Tool .. .download.jpg
  • 2. Launch it after finishing the installation.
  • 3. Click “Scan Now” button.
  • 4. Click “Repair Problems” button to optimize your computer perfectly.
Fix dll errors:http://www.uuaide.com

Jun 27, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Unable to Open Browsers


Something has corrupted your Windows installation or one of the DLL files. This causes a conflict in your system causing the rest of your problems. Try Windows repair from the Windows CD to correct the problem and fix any damaged DLL files.

Aug 27, 2009 | D-Link DI-634M Wireless Router (DI634M)

1 Answer

Error: 1670 Unable to load Module D:issetup.dll error code 1114


Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 02, 2009 | Linksys Ultra RangePlus Wireless Routr...

1 Answer

Unable to load install CD


Router setup
You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Dec 26, 2008 | Routers

1 Answer

I have a WRT160N and when I put in the install CD it gives me an error code: Unable to load Module D:\issetup.dll Error Code 1114


Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe




Dec 26, 2008 | Linksys WRT160N Wireless Router

1 Answer

SETTING UP EASY INSTALL WIZARD - Belkin F5D7230-4


just type 192.168.2.1 into your browser and it will get you into the settings, just as a cd would but you still have to manually enter your settings with either way of setup.

Sep 06, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

Easy Install wizard problem


What you can do to fix this problem is not use the install program at all.
To configure your router, in your web browser's address bar, put the IP address of your router (Another belkin router's default IP was 192.168.2.1 out of the box) and click on go. This should bring you to the routers setup, and the password by default is blank.

May 15, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

I lost my belkin install cd


are u saveing the file to hard drive 1st not run from them

Feb 04, 2008 | Belkin F5D7230-4 Kit (F5D7230V4SNPDQ)

3 Answers

Lost Install CD for F5D7230-4 Wireless Router


Eu preciso instalar o router belkin sem CD, pois o meu foi danificado, e meu computador foi formatado. Perdi o software e não consigo usar o beneficio. Como faço para instalar sem CD. é possivel adquirir somente o CD de instalação?

Nov 01, 2007 | Belkin (F5D7230-4) Router (587009)

Not finding what you are looking for?
Linksys WRT160N Wireless Router  Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...