Question about Kenmore 22622 Top Load Washer

1 Answer

Kenmore washer kenmore 80 series top load, replaced lid switch, and now I can't get the washer to balance, already tried leveling the machine i need to take top off to replace lid switch and figure out how to balance tub how to i go about this

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 530 Answers

Depends some modles have 2 clips under the front left and right you stick your putty knife in there and pull the console up, also there could be end caps get a screw driver and pop them off then there will be 2 screws remove them. Then some models have 2 screws directly behing the consol remove them pull consol forward and up. Once you have got the consol situated there are 2 copper brakets push down and out with your screw driver this will release the cabinet soyou can replace the lid switch

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore Series 80 (8543549) top load washer. It will fill, but not agitate or spin or drain or anything else. The knob does not advance except manually. What component is causing this problem?


if its a top load which i believe a series 80 is,then you need to replace the lid switch to make it operate again,its located under the control panel,some can be replaced from the top,but some need to have the outer case removed to replace this switch

Jul 04, 2011 | Kenmore Washing Machines

2 Answers

How do you remove the top off the washing machine to replace the lid switch in a kenmore super capacity 80 series?


The following link explains step-by-step how to replace the lid switch on a Kenmore top loader:

http://www.fixya.com/support/r3557193-replacing_a_lid_switch

If you have any questions about this repair, please post back and let me know. I hope you find this information helpful.

Oct 26, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

How do I replace lid switch in a Sears Kenmore 80 series, model 1


The following link explains step-by-step how to replace a lid switch on a Kenmore top loader:

http://www.fixya.com/support/r3557193-replacing_a_lid_switch

If you have any questions about this repair, please post back and let me know. I hope this helps you.

NOTE: Kenmore is manufactured by Whirlpool so these instructions will apply.

Apr 07, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

I have a series 80 top loader. It filled and


Screws holding the lid switch was broken. Had to replace lid switch.

Jun 11, 2009 | Kenmore 24902 Top Load Washer

1 Answer

Kenmore 80 series washer stopped during unbalanced spin cycle


lid switch is broke lever probley broke off or screw holes broke out due to off balance load forcing tub over against switch lever

Apr 29, 2008 | Kenmore 20172 Top Load Washer

1 Answer

KENMORE SERIES 80 BALANCING PROBLEMS


The only thing I can suggest is to make sure the load is evenly distributed around the circumference of the tub. If you do only light to medium loads, this can occur from time to time. Lift lid as the unit goes into the spin cycle to check. If it is evenly distributed, you may have a support problem.

Jan 23, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer


how old is it reply will help

Dec 30, 2007 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 22622 Top Load Washer Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

reliableservice

Level 2 Expert

313 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...