Question about Flat Panel Televisions

Open Question

Daewoo pf a700ap digital photo frame - slide show setup options

The slide show setup interval time only goes up to 3 minutes. The instructions say it should offer 1hr, 4hrs, 12hrs and 1 day.

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: not all pictures display on my 8'' Innova digital picture frame

I received this as a gift and I have the same problem.

Posted on Jan 07, 2010

  • 1 Answer

SOURCE: Screen and sound problem?

sony 2005 kdf e60a20 tv---turns on and off every 2-3mins...green power lite stays on no blinking

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT is this tv digital ?


Dear Friend,
First, search for available air channels by going to you menu and then search for channel setup.
Second: change the option from Cable to Air Channels.
Third: after performing the channels setup you should be able to see free channels trough the air.
Good Luck!

Aug 06, 2014 | Shopnbc Insignia 39", 46" or 55" Full HD...

1 Answer

LG 42CS560-UE LCD TV turns off by itself Power Supply is New


You must accidentally setup the auto sleep function within 3 seconds interval. Go to the setup page to re-configure no auto sleep interval.

Jul 22, 2014 | LG Flat Panel Televisions

1 Answer

Need 3 digit remote codes for TCL TV Model L40FHDF11TA for Cablevision remote ur2-cbl-cv04


002,009,001.Check these codes. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

Oct 21, 2013 | TCL LE32HDF3300 32 Inch LED LCD HDTV

1 Answer

Westinghouse LD2480 no set up wizard?


If you wish to get setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

Mar 18, 2013 | Westinghouse Flat Panel Televisions

1 Answer

Forgot my four digit Pin number to unlock my channels


YOU WILL NEED TO CONTACT CUSTOMER SERVICE TO RETRIEVE YOUR PASSWORD...MORE THAN LIKELY YOU ENTERED SOMETHING SIMPLE TO REMEMBER?

THE TV WILL ONLY LET YOU TRY 3 TIMES AT EACH INTERVAL,

IF YOU FAIL AFTER 3 TIMES, WAIT A FEW MINUTES AND TRY AGAIN!

ALSO, IF YOU HAVE 2 TV'S: REMEMBER TV1 LOCKS TV2, AND TV2 LOCKS TV1,

TRY RETREIVING YOUR PASSWORD FROM THE OTHER TV!

HOPE THIS HELPS,

MARTIE

Aug 24, 2011 | Flat Panel Televisions

2 Answers

Screen and sound problem?


sony 2005 kdf e60a20 tv---turns on and off every 2-3mins...green power lite stays on no blinking

Mar 27, 2010 | Sony KDF-E60A20 60 in. LCD HDTV

1 Answer

Vizio P42HD, ok for a few minutes then flickers, picture looks "solarized" then goes blank. Flickers on/off at random intervals. May stay good for minutes to hours, may stay bad for minutes to hours, or...


Disconnect the Z sustain board ribbon cables that go to the display and clean them with a small amount of acetone, ( nail polish remover ). ONLY THE COPPER TIPS ON THE RIBBON.....NOT THE RIBBON. Put those back in and do the same with the Y.
Z on the right Y on the left..

Oct 21, 2009 | Vizio P2 42 in. HD-Ready Plasma Television

2 Answers

Picture goes out right after turning on, have to


My 3 year old Sharp LC-40C32U would start up fine but within a minute would go dark (audio continued fine). For a while I could turn the set off and on again and it would be fine, but over time this became less effective. My solution, which has worked for a week now, was to a) unplug the set's power cord; b) after 3 minutes plug it back in and turn the set on; c) on the remote hit MENU and slide over to SETUP (3 clicks to the right if the screen is dark) and one up to RESET; d) hit ENTER and follow the prompts. This puts the set in it's factory configuration so you will have to rescan for channels. Worked for me.

Sep 24, 2009 | Sharp AQUOS LC-40C32U 32 in. LCD TV

1 Answer

Trutech-LCD/DVD digital code for comcast setup


The Daewoo code worked for me 10451 if that doesn't work try the other Daewoo codes in the manual

Sep 02, 2009 | TruTech PVS2119 19 in. LCD Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...