Be sure you have a fresh battery. At some point the battery doesn't have enough energy to run both the player and the card. You can pull the card out and play what is in the internal memory or just replace the battery. I am cheap so I play it without the card for until the battery dies the rest of the way.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
this is the best solution
you have update your lyra rd 1080/rd 1090
for download the updating click her
and after instaling this update follwo instructions provided below
? To update your Lyra RD1080/RD1090, make sure you have it connected to the computer via the included USB cable. You will need to make sure that no external memory has been inserted and the Lyra RD1080/RD1090 display reads: "USB Connected Int. Mem". (If it does not, please refer to the users guide for the section on how to switch between internal and external memory.)
? Once connected, locate and run the Lyra Systems File Update Utility if it didn't open automatically. Installshield Wizard will have automatically created this icon on your desktop as well as under "Programs", "Lyra Personal Audio Player", "RD1080/RD1090" in your START menu.
? Click the "Refresh" button until the RD1080/RD1090 player shows up under device.
? Once displayed, highlight the drive letter by clicking on it, and click the "Update SYstem Files" button.
? When successfully completed, you will see the message, "The Lyra Personal Audio Player Device system files were successfully updated."
? Click the "OK" button, and then "Done". This will close the Lyra Systems File Update Utility.
? Disconnect the Lyra RD1080/RD1090 from the USB cable, turn the unit off and back on.
I had the same problem, and that is what RCA answer me:
Due to a unique FAT12/16 cluster size requirement, the supplied format utility that comes with the RD1021/RD1071/RD1075 MUST BE used on all SD/MMC cards before they will work in the RD1021/RD1071/RD1075. Once formatted, these cards will still be FAT compatible and should still work with other devices, i.e. RD1080. The format utility can be found under "Programs", "Lyra Personal Audio Player", "RD1021,RD1071,RD1075", "Format Media" once your software has been correctly installed from the included RCA CD-ROM.