Question about Spinmaster Air Hogs Battling Havoc R/C Helicopters

1 Answer

Air hogs rotor - pulled wires

Was trying to fix my sons new air hog rear rotor and pulled out entire metal spindle and broke wires... is this possible to repair...is one of a set of battling air hogs, so its a bummer that one doesnt work

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

First just shove the wire back in and try to wiggle the motor back in and it should appear to be untampered and if you still have the box there is a number on the back, you just tell them the rear motor didnt work and they will send you a new one or you can put it back in the box and take it to wherever you bought it and tell them the same thing and then theyll give you a new one if you cant find the number here it is: 1-800-622-8339

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Balance blade rotor broke


You can get a new balance beam on Ebay for a few pounds just search Air hog. Just check the linkages are ok before you order so you can buy them as well if needed. They are actually called a " Flybar"

HTH

Jan 03, 2014 | Air Hogs Hover Assault Vehicle

1 Answer

I need a new blade were can I find one


Amazon.com seems to have quite a large selection of "replacement blades" but you will need to look them over to see if one fits your exact needs. Good luck!

Dec 31, 2011 | Air Hogs Spinmaster Air Hogs Havoc...

3 Answers

WHy dose my brake pedal push back and make a grinding noise


Look through the openings in your front wheels and look at the front rotors-are they gouged up? You are probably running metal-to-metal, pads to rotors.
Chances are real good your rotors will have to be replaced along with new pads, but if you catch it early enough you might be able to have them machined, although nowadays that is hardly easy to get done and the savings usually is not as significant as it once was.

May 23, 2011 | 1995 Pontiac Bonneville

1 Answer

Left front hub replacement 2WD.


2WD pickups don't have hubs. They have rotors with bearings. Once you have the brake assembly supported, remove nut from spindle. Be sure not to strip the threads on the spindle. Remove the front set of bearings and pull the rotor off. Remove the rear set of bearings. Be sure to pack greases into new bearings prior to installation. Insert new rear bearing into rotor and replace onto spindle. Insert new front bearing and washer and re-install nut. Tighten to recommended torque specs, grease fittings and replace brake assembly.

May 15, 2010 | 2005 Chevrolet Colorado

2 Answers

98 Rodeo - ABS light on all the time, Relay Error?


I had a similare problem. Mechanic found a broken ABS wire connection in the rear left shock area. It did not solve the issue. I pulled out the ABS sensor from the rear diff and found a piece of metal megnetized to it. Removed it and things worked. New mystery about the metal though.....
Eventually I had to redo what the mechanic fixed with the wire connection and I replace the entire harness. Removed it entirely and soldered a cable in between.

Dec 19, 2009 | 1998 Isuzu Rodeo

1 Answer

Does the entire rear brake assembly need to be taken apart to install a wheel berring


you have to pull the rotor off and the bearings are on the spindle behind the rotor or the drum if they are drum brakes

Sep 25, 2009 | 1999 Chevrolet Monte Carlo

1 Answer

Wire fell out of my sons drum set. it's the symbol wire


I just fixed this problem on our WII drums, the entire connector was ripped off the wire. You can get a repalcement jack at Radio Shack (pair is $4). You will have to carefully strip the shield and center conductor, tin with soldering iron and install new jack. Make sure you put the connector shell on the wire before you install the metal jack. Works like new.

Jul 04, 2009 | Nintendo Rock Band for Wii

Not finding what you are looking for?
Spinmaster Air Hogs Battling Havoc R/C Helicopters Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Spinmaster Toys Experts

Brad Brown

Level 3 Expert

15109 Answers

kakima

Level 3 Expert

102366 Answers

ray gallant

Level 3 Expert

40945 Answers

Are you a Spinmaster Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...