How to set preset radio stations on Sharp CD-C2600 Shelf System

How about first deciding what stations you want. Then reset each by holding the button.

hi,
there is no auto presetting available. u have to set all channels in preset manually. if u power off the subwoofer all setting will be erased.for manual preset do the following.


1. Press the FUNCTION button to select "TUNER".
2. Press the FM/AM button to select a band.
3. Select the station you want to listen to (Hold down the TUNING Up or Down button until the
frequency display begins to change. When a station is tuned in, the tuning process will stop automatically.)

when it tune the first station available do the following to preset it,
4 .Press the MEMORY button.( on remote)
5. Within 5 seconds, select a preset channel to store the
station using the PRESET buttons of the remote control
unit.
6. Within 5 seconds, press the MEMORY button.(The station is stored and the MEMORY indicator goes off. To store more stations, repeat steps 3 to 6) .

for listening preset ed station ,Press the PRESET button repeatedly until the desired
preset station is found.
ok

Ok to set Manually Turn on radio Select Tuner select band. Press tuning mode button. The window should switch from preset to manual then tune up or down using the tuning preset time buttons left side/ top / Next to volume knob

while the system is on press and old the demo button until the demo plays (while system is on) press and hold the demo button again to turn the demo off. and to preset the stations press tuning mode so it goes to preset the press set select what number you want the preset to be and press set again to save it.

To reset or set the preset station you want you need to do this 1 press tuner/band to select the band 2 Press the << down or >> up to tune to desired station 3 Press the  set to stor the station the preset number begining with one appears display you cannot stor a total of 32 preset stations if you need more information check out the manual here .. Manual

To set individual presets: 1. tune to the station you want as a preset 2. hold down the number (ie "1") on the remote until the number blinks on the system 3. repeat for all other stations
press the number on the remote to tune to your preset
this is very similar to setting the presets on my car radio

Click Sony Support to download user manual of CHC-CL1 to know about setting radio preset function.

All of the presets I have encountered in the last years were thankfully simple; you manually tuned the station, then simply pressed and held the desired button until the display was stable (not blinking).

You may have to manually set the preset stations on the unit itself. Read the user manual.