Question about Video Cameras

3 Answers

How to mute and add music to Motion SD STUDIO 1.3E

I found music that came with the software, and i know how to add it to the video. My problem is i cant figure out how to mute JUST what i filmed, so only the music plays in my video. Also, i need to figure out how to add my own music in. It would be good if someone could tell me the steps to do that (i have iTunes.)

Posted by on

  • 5 more comments 
  • Anonymous Dec 27, 2008

    how to import my own music into the video

  • Anonymous Jan 04, 2009

    I need to know how to import my own audio, someone save me!!!!!

  • Anonymous Jan 04, 2009

    how to import own music files into motion sd studio.

  • emzdabomb Jan 22, 2009

    hey,

    i have exactly the same problem.



    But i am pretty sure i can mute the beackground sound, and just hear the other sound.





    I have itunes as well, and i want to know how to import my songs from there.

    x

  • diggers2k Jan 31, 2009

    How do I get audio files into the package, say from iTunes?

  • Lilypip Apr 03, 2009

    Argghhh I have the same prolem too.

    I converted my itunes files to Mp3s but Motion SD Studio still won't import them. Someone please help.

  • Mongrol Apr 29, 2009

    Page 77 in SD manual shows audio files but doesn't tell you how to put them there. Crappy instructions. FIX 'EM UP

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Motion Studio camcorders will also accept .WAV files. Convert your MP3s and place in same folder as your video files. They will appear in the audio tab. Note that .WAV files are much larger than the canned music that comes with the software. Rod

Posted on Jun 04, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Right click on the clip ... click on properties .... and put the volume to 0 .....

were is the music you said u could put in >>>>?????? www.youtube.com/bcmedia2k8.......

Posted on Jan 06, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You can mute the recorded audio by putting the volume to 0 and also you can increase or decrease the volume by 1 to 4.

I don't know how to add my own music to this, i'm still trying.

Posted on Mar 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot download video and audio to computer on the JVC gz-mg21u hard disk drive everio camcorder. Can download video, not the audio. Do you need the original software to download?


All right, the following section will show you the best way to help you with the conversion.

Download:
1. Download, install and launch Video Download Studio from http://www.downloadvideos-convert.com/download-videos-music.
2. Click” add URL” button to paste the URL of the video you want to

download. ( or you can play the video on dailymotion and click “auto capture”, Video Download Studio will automatically capture and download the video for you.)
3. Download details will showed on the working window.

Convert:
1. Click” convert” button on the top, you will switch to convert interface.
2. Click ”add” button to load your videos to Video Download Studio
3. Click” profile” drop-down list to select MP3 format.
4. Click” convert” button on the bottom, you will get MP3 format video in seconds.
As you can see, these simplest steps enable you to convert video. Join in and do it yourself, you will get a lot of fun.get it from http://www.downloadvideos-convert.com/download-videos-music

Jun 02, 2010 | JVC Everio GZ-MG21 Camcorder

2 Answers

Trying to find software download for my JVC/everio GZ MG-130U camera. Have any suggestions?


1. Download, install and launch Video Download Studio(http://www.downloadvideos-convert.com/download-videos-music)
2. Click” add URL” button to paste the URL of the video you want to
download. ( or you can play the video on dailymotion and click “auto capture”, Video Download Studio will automatically capture and download the video for you.)
3. Download details will showed on the working window.
Convert:
1. Click” convert” button on the top, you will switch to convert interface.
2. Click ”add” button to load your videos to Video Download Studio
3. Click” profile” drop-down list to select MP3 format.
4. Click” convert” button on the bottom, you will get MP3 format video in seconds.
As you can see, these simplest steps enable you to convert video. Join in and do it yourself, you will get a lot of fun.get it from http://www.downloadvideos-convert.com/download-videos-music

May 11, 2010 | JVC Everio GZ-MG130 Camcorder

1 Answer

I have a Panasonic SD-7p camera, and use Motionsd studio to download and edit. The manual is worse than useless. Is it possible to make slow motion videos using this combination? My thought was to use the...


i think you can try another software to download your video,
once i try the software of Download Video Studio.it could download,convert,and rip your video very smoothly,
you can find it in http://www.asharer.com/
hope it can help you more or less.

Mar 10, 2010 | Panasonic SDR-S7K Flash Media Camcorder

1 Answer

Don't know how to upload it to my comupter


You would have got an application Motion SD Studio for edit videos on the computer. You need to insatll that and use the USB cable that came with the camera to upload video or read the SD card directly on the computer tp upload video. A user manual for the S/W will be a PDF file on the CD or the SD card.
If you did not get the S/W you may be able to download on line

Jan 10, 2010 | Panasonic SDR-S10 Camcorder

1 Answer

How do I download the video to a computer for editing. Is there a free software for this work


All right, the following section will show you the best way to help you with the conversion.
Download:
1. Download, install and launch Video Download Studio from http://www.downloadvideos-convert.com/download-videos-music.
2. Click” add URL” button to paste the URL of the video you want to
download. ( or you can play the video on dailymotion and click “auto capture”, Video Download Studio will automatically capture and download the video for you.)
3. Download details will showed on the working window.
Convert:
1. Click” convert” button on the top, you will switch to convert interface.
2. Click ”add” button to load your videos to Video Download Studio
3. Click” profile” drop-down list to select MP3 format.
4. Click” convert” button on the bottom, you will get MP3 format video in seconds.
As you can see, these simplest steps enable you to convert video. Join in and do it yourself, you will get a lot of fun.get it from http://www.downloadvideos-convert.com/download-videos-music

Dec 06, 2009 | Sony CCD-TRV228E Camcorder

1 Answer

Service Pack problem


******************************************************************* VideoCam Suite 2.0 *******************************************************************
[Table of contents] 1. Notes about operating environment 2. Notes about operation
<><><> 1. Notes about operating environment <><><>
1. [Important] Adobe Acrobat(R) Reader 5.0 or later or Adobe(R) Reader(R) 7.0 or later is required to read the operation manual or the help information on your PC. Get the license for using the operation manual before reading it.
2. AC adapters are recommended when using a notebook PC or a HDD/SD video camera with the VideoCam Suite. If a battery pack is used to power the HDD/SD video camera or the notebook while recording or previewing motion pictures or still pictures, they may not be recorded, previewed, or copied to the PC Hard drive properly.
3. Standard configurations must be used for the fonts and screen settings for Windows(R). Depending on the settings, characters may not display properly.
4. It is impossible to use VideoCam Suite simultaneously with other motion picture editing software or video capture products. Note that this software may not function properly if software with a timer recording feature in the background is running.
5. This software will function properly only when the system time is set to a value within the following range. From 0:00 on January 1, 1970, to 23:59 on December 31, 2037 If the system time is set to a value outside the range listed above, the software may not start or function properly.

<><><> 2. Notes about operation <><><>
1. After installing/uninstalling the application, a dialog box is displayed notifying the user that the system needs to be restarted. Make sure to restart the system to complete the installation/uninstallation.
2. This software can handle only motion pictures and still pictures recorded by this software or the Panasonic video camera packed together with this software. This software cannot process motion pictures and still pictures recorded by any other video cameras, DVD recorders, software, commercial DVD video, or commercial BD video.
3. User privileges for this software - It can be used by only a user with administrative privileges for Windows(R) XP and Windows(R) 2000. - It cannot be used by the Guest users in Windows Vista(R)
4. While recording, if motion pictures cannot be recorded properly for any reason, follow the procedures described in the operation manual to restart the Windows system. Motion pictures may not be recorded properly if any other application software is used while recording the motion pictures. Close all other application software and any resident programs, such as virus scanning software. We recommend closing all other applications and resident programs, such as virus scanning programs, before starting this software. While recording motion pictures on a DVD disc/SD card do not execute the following operation since it may disturb proper recording and destroy the DVD disc/SD card. - Turn off or restart the PC or DVD/SD - Switch users or log-off - Change the screen settings - Use the power saving functions, such as the screen saver, sleep, standby, and pause. - Close this application by force
5. To record motion pictures on a DVD disc or an SD card, check that the motion pictures can be recorded properly. After checking that motion pictures are recorded properly, delete the original motion pictures from the PC Hard drive.
6. When the edited motion picture is output in MPEG-2 format, some scenes may not be generated completely in MPEG-2, and some parts of frames may be shifted or omitted.
7. When motion pictures are copied from a DVD-VR formatted DVD disc to the PC Hard drive, data other than motion pictures cannot be copied.
8. Do not modify or delete any files or folders related to this software. Otherwise, the software may not function properly.
9. This software can only process DVD-Video discs recorded by this software. This software cannot properly process DVD-Video discs recorded by any other DVD authoring software.
10. This software cannot process motion pictures or DVD discs/SD cards that are copyright protected.

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
- Microsoft(R) and Windows(R) are registered trademarks of Microsoft Corporation in the United States and other countries. - All names, company names, and product names used in this document are the trademarks or the registered trademarks of their respective companies.

Jun 16, 2009 | Panasonic SDR-H40 HDD Camcorder

1 Answer

Need to download video to computer - Sony Handycam HDR-UX1


Google a program called
Video Download Studio
then you can use it FREE download video or audio form YouTube, google, metacafe, redtube, dailymotion etc. attention: download function is no need to register
you can also use it to convert video to audio, video to video, audio to audio.
use it convert video to mp3 mp4 for your iPod
tutorial;
http://www.downloadvideos-convert.com/how-to-use

Jan 15, 2009 | Sony Handycam DCR-TRV140 Digital Camcorder

3 Answers

How do i edit using motionsd studio 1.3e?


I had much the same issues with my Motion SD Studio manual...pretty much useless. On screen help? Forget it...it won't find it. Again..useless.
So the only way I learned to use it was by just digging in and doing it. Once you have it figured out, it really isn't that bad to use. Although it is rather basic as far as editing goes. I quickly outgrew the program and now use Magix Movie Edit Pro 14...MUCH more versatile! But I still need Motion SD to load the files into the computer and render them into the proper format for MEP.

SO the first thing you want to do is load your video clip into the computer. Make sure your power cord is connected to the camera. Then connect the USB cable th the cam and computer. The camera will ask you if you want it to be ""pict-brigge or as a USB drive. Choose USB drive. Cancel out of the window that pops up.
Now start your Motion SD studio software. In a few seconds a box will appear asking you what to do. Yo want to upload files from the camera. Pick this option and a new windoe opens up displaying the videos in your camera on the left and a preview screen on the right. Simply highlight the clips you want to inport and then click the "import" button below the preview screen. This process may take some time depending on the length and number of clips you import.
Once importing is complete, it will ask you if you want to edit the images. Hit YES anf the edit window will open up.
Then drag your clips tio the timeline and begin editing.

I hope this is helpful to anyone having trouble getting thingd going with this software. Remember, I had to learn this on my own due to insufficient manuals and a lack of online help. I can offer further assistance if anyone might need it.

Regards
Rick - Loose Wheel Productions
(NOT affiliated with Panasonic or Motion SD Studio.)

Dec 15, 2008 | Video Cameras

1 Answer

Downloading the video from a panasonic sdr-s7


You dont need a software. I just plugged the camcorder to the wall socket and clicked on the option PC CONNECT in the camcorder which comes automatically when you plug in. In 'my computer' go to removable device and copy the files and open with windows media player. Anymore problem. Email me : glennlx@yahoo.com

Jul 05, 2008 | Panasonic SDR-S7K Flash Media Camcorder

1 Answer

Video Download Issues


Hi, I had the same problem and found it was an issue with my non- licensed Microsoft XP software. I bought a new copy of XP and the camera was located without issue.

Feb 12, 2008 | Panasonic PV-GS500 Camcorder

Not finding what you are looking for?
Video Cameras Logo

Related Topics:

1,280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Cameras Experts

kakima

Level 3 Expert

98694 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Are you a Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...