-   I turned my machine on this morning and Error 5400 popped up on the screen almost immediately. Have had the machine between one and two years. Have had no problems. Have done no serving or maintenance.
About two days ago I started getting an error message when I switched from the back feed tray to front feed tray. The front feed tray said it could not print using the paper I had in it but it was the very same kind of paper (standard stuff) I have been using all along. Prior to that I had been printing about 20 photos from the back tray. First time I had done that. Had had no problems with that.
Karenquilt
-   karenquilt
per the website at "http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=15651#SupportDetailAct" this may require service.
Was this helpful?
Yes
No
Popular Solutions for Canon PIXMA MX700 All-In-One
After trying to run perferated card stock the printer never loaded if form the back and then...
(More)
After trying to run perferated card stock the printer never loaded if form the back and then produced an effor code 5700. I have cold booted unplugged and it remains locked out with the alarm light on
I get an error code 5100. Printer does not start to print. I have checked the printer head and...
(More)
I get an error code 5100. Printer does not start to print. I have checked the printer head and cleaned it. Only on print catridge is low and flashing.