Question about Kitchen Ranges

Open Question

I have a rice cooker that i just recieved. Cooks Lot # 2134 it is made by Sensio and is model # 22019 and when i plug it in it comes up with a code on the digital display of E2 can you help me with this

Posted by on

1 Suggested Answer

ranger25
  • 72 Answers

SOURCE: error codes e2 and f3

F3 is an open or shorted oven temperature sensor, you will have to replace this and it should be attached near one of the elements but you will have to pull it out through the back.

E2 is, sorry to say, a possible ERC or Electric Range Control, otherwise known as the brain behind it. But on the plus side, sometimes it gives this code intermittently when it can't process the information from a failed sensor, so you might get lucky.

Posted on Jan 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magic Chef gas stove range keeps tripping outlet when I plug in the power cord, What can I do??????


get extension lead plug lead from cooker into it do not plug into socket that you usually plug cooker into try another switch on if it still cuts out means fault is with cooker lead and electrics. if you can open plug check wires have not come loose. other than that you must get an electrician!

Oct 25, 2014 | Kitchen Ranges

1 Answer

Burner not working


Good morning to you
Have you checked the power?
Weather it is on or not as well as cables and plugs.
Some cookers have an automatic thermostat and cuts the power off if things get too hot. then you have to find the bulb (small) which red and push a button beside the bulb and a green light comes on and the cooker is working again.
Enjoy your coffee
kolbrun

Apr 24, 2012 | Frigidaire Kitchen Ranges

1 Answer

Right large burner cooks on high no matter what setting.


This is usually the infinite switch has failed. They are easy to check and inexpensive. There is a video at http://appliancehelponline.com/infiniteswitchvideo.html that will walk you thru testing this. It may be a different model but the testing will be the same. You can also enter your model # for diagrams and illustrations for your specific model. Not all models are available. All parts come with installation instructions.

Jun 08, 2010 | Hotpoint RB787BHBB Electric Kitchen Range

1 Answer

Purchased Durabrand Rice Cooker model HRC 18G working fine Is there a User manual for this cooker? All that is needed is ratio of water to rice including plain long grain and Basmati rice for 1 - 4...


Instructions quoted from the Durabrand Rice Cooker model HRC 18G manual...... 1 cup of uncooked rice rice will make about 2 cups of cooked rice. Add rice to the inner pot. Maximum four cups uncooked rice for the model. Many varieties of rice can be used including basmati, wild rice, arborio risotto, saffron rice and long grain rice. Whole grains, such as barley can also be prepared with the rice cooker, follow instructions on the package.

For every cup (160ml) of raw rice, add 1-1/2cups of water. For stickier rice add slightly more water, for fluffier rice use slightly less water.

When your rice is cooked, the cooker will automatically switch to the warm function and the yellow warm light will turn on. The cooker will stay in the warm function untill is disconnected from the wall outlet. The cooker will keep the rice warm 158F - 212F

Hope this helps, its quoted right out of the manual I have for my cooker

Jul 27, 2009 | Kitchen Ranges

2 Answers

Oven Ignition Keeps Clicking


it is the spark generator at back of cooker they are about £65

Mar 16, 2009 | Cannon Chesterfield C60G Kitchen Range

2 Answers

User Manual for Belling Electric Cooker


The clock is flashing zeros because you need to set the clock timer.To do this you need to press and hold in both of the the cook period and end time buttons together, then with both buttons still held in , press either the "+" or "-" buttons to set the correct time of day

Aug 21, 2008 | Kitchen Ranges

1 Answer

I want to replace the grill element on a Westinghouse upright cooker - Kimberley 501


A bit further investigation revealed the following:

Remove the two black clips on either side of the rear of the grill element and the element will come loose. Remove the connection lugs (two on the left and one on the right) and install the new element. Caution is needed because the element connection lugs do not have a lot of excess wire on them and may require the removal of the back of the cooker to effect a good replacement.

Jun 30, 2008 | Kitchen Ranges

1 Answer

Cooker


Hi lisa not to sell cookers only to fix them , try asking for you money back or go to the small claims court for you money or send them a bill for the work needed to fix the gascooker , if they are a dealer in gas cookers them might not want to go down this road or there is the trade description act ,

lisa thats the best i can offer it will be a fight but the small claims court is there to help i used it twice when things where sold and where bad i won both times hope this helps ,paul

May 20, 2008 | KitchenAid KGRA806PSS Gas Kitchen Range

2 Answers

Low Gas Pressure on Smeg Range cooker


there should be a regulator on back of the stove where the gas line connects.you will see a plug that unscrews,remove this plug and run the unit.if this solves your problem clean the plug really good and put back on.

Dec 25, 2007 | Kitchen Ranges

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...