Question about DISH Network ViP622 DVR DTV Receiver / 180-Hours Video Recorder

1 Answer

BLANK PINK SCREEN ON 2 CHANNELS THAT PLEVOUSLY WORKED

Not sure what happened . Please HELP!!!

Posted by on

  • Anonymous Jan 19, 2009

    was watching the steelers game and the screen just went pink. It has stayed pink and will not go back.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

First try a front panel reset by pressing and holding the power button on the receiver until it shuts off and turns back on. Leave the receiver alone until it is up and running. If this did not solve the problem try a hard reset by unplugging the receiver's power source from the wall and leaving it unplugged for approximately 30 seconds and then plugging it back in. Let the system come back up and if that did not solve the issue the receiver may need a technician to come out and troubleshoot it further.
There are some local stations in the Jacksonville area having an issue with their broadcast signal producing the same image. Please check with your local station to see if this is the case in your area if these are the channels you are having issues with too. Thanks for using FIx Ya and I hope this answered your question. Let me know if I can further assist you.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn off and on, blue screen


Hi, I am sorry you are having a problem with your DISH video. A blue screen means you are on the correct channel or input on your TV. If you turn the Tv off and then back on, ehat channel ot input does it say it is on. You should be on channel 3 if at TV1 or 60 or 73 if at TV2. If the receiver is connected to the TV using the Red/ White/Yellow cables, then the TV needs to be set to a video input. If you any additional assistance, please email me directly. Thank you!

Mary Catherine Brady
DISH Internet Response Team
marycatherine.brady@dish.com
2:45pm-11:15pm (MST) Tuesday-Saturday

Jun 03, 2012 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Dvr not responding


There was a software update early this morning which caused your recvr to go to recovery mode until it downloads the new software which takes about 4 hours. Once this is done you should be just fine!

Dec 10, 2009 | DISH Network DVR-625 DTV Receiver /...

1 Answer

I have 2 receivers and 2 remotes, one per receiver so we can watch separate programs on different tvs, but I dont know how to program my 2nd receiver to the remote. We used to have each receiver set to a...


Just to clarify is your screen snowy or blank? I ask because you did say it was set to a channel. If you just need to program the remote to the reciver all you have to do is whiile your rcvr is on pull the sc out on the left hand side. That will take you to a screen that says system info and at the very bottom of that screen you will see remote address. Note the number in the white box. Now all you have to do is press record on the remote( should be right above the number 3 key). Then your remote should be addressed, and the number in the white box should change. If not please let me know there might be some more trbleshooting that has to be done. Then put the smart card back in and your rcvr will reset and all is well.
If you arent getting a picture try ch 3 then ch 4. then cycle through your tvs inputs. Like video one video 2 and so on. These steps should get you a picutre back.
If not again please let me know there is more trblshooting for no video.

Sep 18, 2009 | DISH Network 311 DTV Receiver

1 Answer

Starview codes for june 2009 please


What I did after loads of trial & error trying t follow peoples advice on here so not sure how much of it you need t do (Stage 2) might not be neccessary so try 1) followed by 3) & 4) first ;o) :-

1) Deleted all the channels & reset the factory settings to 0000.
Turned off the box at the plug, left for a couple of minutes & turned back on

2) I reinstalled the software at http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess (Not sure if thats necessary but I did so try this if 3 & 4 dont work without reinstalling)

3) Turned on the Box & went into the menu pressed 1570 on main screen to get into the CAS SASTEM & turned the EMU key ON

4) Reinstalled the channels using Telewest (Even tho I'm with Virgin) & voila, it worked & I can get all the channels again ;o)

Good luck - Stace

Jun 15, 2009 | Televison & Video

1 Answer

Black Box appearing on my screen


go into your menu and access the closed caption modes. someone has accidently put your tv in the "text" mode. turning off the closed caption feature will correct this.

Apr 01, 2009 | Televison & Video

1 Answer

Fuzzy tv screen that says lost signal (no dishnetwork signal)


Here are a few suggestions,

*Check your connections to make sure none are loose.

*Try checking the Dish box to make sure everything that should be turned on is actually on.

*Also make sure channel 3 is the correct channel by contacting your service provider.

I hope theis solution is helpful. Please take a moment to rate this solution.

Feb 12, 2009 | Televison & Video

2 Answers

No freeview bbc channels


just solved the problem
with the variable attenator fitted i did a rescan still didnt work
but when i did a rescan to the restore factory settings it now works

Nov 24, 2008 | Televison & Video

2 Answers

Pink and blue images occasionally on power up of DISH DVR


Tell me a little more about how the receiver is connected to the tv and if this is present on both tvs at the same time and lastly what brand and model of tv you have. I recently had an issue somewhat similar to this but need more information to make an educated hypothesis.

Apr 18, 2008 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

Tivo tv screen frozen


It could be your tuner, can you/have you tried changing to another channel?

Dec 12, 2007 | Tivo Series 2 80-Hours Video Recorder

Not finding what you are looking for?
DISH Network ViP622 DVR  DTV Receiver / 180-Hours Video Recorder Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...