Rainbow in picture, have shut off and back on but still is there.

If you have the model Rainbow E-2 eSERIES then the Motor Rainbow 120v could be going bad. This will trip the auto reset until it cools down.
If you have an E2 Type 12 Rainbow, then the Controller Asm 120v e2 Silver Gold could be going bad.
Our technical support team is available if you need... Contact Us

RainVac

PDF]3 - Rainbow

rainbowsystem.com/.../Rainbow_e2_2011_R14449A-1_English_P...

RexairAs part of Rexair's Customer Care program, each Rainbow and Power Nozzle receives a ... If the Rainbow is not working ... Do not clean the unit or unclog the hose until theRainbow is switched off and the plug is removed from the wall ..... alone or with the Jet Brush attached. ..... The Power Nozzle brush is stopped and.

My Rainbow Vacuum Cleaner Won't Turn On ' eHow

Rainbow keeps shutting off Vacuums Questions & Answers ...www.fixya.com > Forum > Tags > keeps shutting off > VacuumsRainbow vacuums keeps shutting off related questions and answers. ... My Rainbowstopped running I was using the Rainbow and it stopped running. ... the switch . my electrolux has the same problem but wont always turn on.so it probably is ...Three common problems with Power Nozzles and how to fix ...

Check its degaussin posistor. Replace it. This component can be located at the main power regulator section.
Picture of the suspected component attached.

Yes, you have put too much water in it. Simply drain a little bit out.

Jim

Hi, there is no reset button on a Rainbow vacuum. There is a safety switch on all E series and E2 series Rainbow vacuums, that keep it from running without the water basin on it.
If you have any more questions let me know. I am a Rainbow seller, and a Rainbow expert also.

Thank you,
Ralph
One other thing, water sucking through your vacuum should not hurt it. It is not good though, but will not make it not run.

Thank you again,
Ralph

I just had a rainbow of colors on my tv screen...i thought it was a problem with my TV...however the screen went the "sign off" screen (verticle lines-red/blue/green) Then all of a sudden the picture came back and all was back to normal again.

So I say it's nto your TV it is a station problem!

Bent lines?????????????

The degausser cricuit may be the fault. The degausser coil may be staying on, and thus forces a shut-down. It is also possible to have a power supply fault that can cause a similair effect.

The set will need shop service.

Jerry G.

I'm having the same problem. I was watching tv and it just shut down. turned off for a while and tried to turn back on - nothing. What happened. Had tv for 1 and a half years and never had any trouble until now.

The only time I have seen that symptom is when the shadow mask of the picture tube gets loose,What that means is you might be looking at a bad crt,color splashes could be a purity problem but rainbow lines are not.Sometimes that happens by itself or by being drop.Good luck