Question about Eclipse SIR-ECL1 SIRIUS Radio Receiver

3 Answers

2006 factory dodge radio sat quit working

Hello, have a 2006 dodge truck. had sirus and everything worked fine. now if i switch to sat, it only stays on 187(i think) and you can only change the volume down. is there some way to reset the sat portion. I tried disconnecting the batteries, but didn't change anything. Again, the radio and cd player work, but the xm stopped. Do I have to get a new one or does anyone have any other ideas? Please help?

Posted by on

  • 7 more comments 
  • Anonymous Mar 30, 2009

    2007 Dodge ram I have the same problem. It worked fine and now it just blinks that channel. Can anyone advise what to do?

  • jsneed36 Apr 01, 2009

    I have a 2007 Dodge Ram and my sirius quite working around 3/24/09. I called sirius and they have tried to re-send a signal to me but that doens't work. They basically told me to take the truck to the dealer.

  • jsneed36 Apr 01, 2009

    I have a 2007 Dodge Ram 1500. Sirius quit working for no reason around 3/24/09. Now it is just stuck on channel 184. I called sirius and they have tried 2 times now to resend the signal and nothing. They told me to take the truck to the dealer.

  • Anonymous Apr 06, 2009

    Sirius worked fine until I took it into the dealer to have the water pump replaced. Got truck back, and not radio just flashes between clock and channel 187. CD and AM/FM work fine. Resetting fuses did not help.

  • Anonymous Apr 22, 2009

    Guess I am #6 - Just stopped tonight with no apparent cause. Flashes from station 184 & Clock. What the......

  • Anonymous Apr 23, 2009

    Same thing here... 2007 3500, Sirius site doesn't recognize my acct#, user name, password, etc... Tried the old school trick (calling them) and was on hold for 45 minutes before deciding to hang up. Still no Sirius...

  • Anonymous Apr 23, 2009

    07 factory radio blinks 184 and clock on surius radio, started 04/17-09. any help

  • Anonymous May 22, 2009

    2007 Dodge Ram 2500 ... same problem

  • Dean Buchanan
    Dean Buchanan Feb 12, 2014

    I have an 06 dodge ram 2500 with the same issues. Soft resets do not work... hard reset does not work... and when I say hard reset... I am not talking about removing battery cables... I am referring to simply taking the clove box out... when removed the sirius xm control mudule is mounted stright up from the glove box opening... I removed the power plug from it and then pluged it back in... it then while in satellite mode serched for channels for a minute and then right back to nothing... no volume control... no being able to change the channel... and still on 184. I have taken mine to a radio shop and was told that it is the satellite receiver that needs to be replaced. Has anybody else heard this?



3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Turn radio on to sat, display will read ch 184. Go on net to Sirius website.( i used my iPad ) Click on help and support at top of page. Click on refresh my radio. A page will come up. Enter radio esn. This will send a radio activation signal to the radio. This may take a few minutes. If after 5 minutes and nothing happens try again. It only took me one time. 2006 dodge ram 1500 factory radio. Good luck!!!

Posted on Feb 15, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turn off the radio but keep the car running. Press the eject and time button at the same time. This will give you the first four digits of your radio id. Press the seek button to advance to the next four. Continue until you have all sixteen digits. Call Sirius and they will send a refresh signal.

Posted on Oct 24, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Soft reset. get in turn on truck with door shut turn on sat radio on ch 184. turn off radio turn off truck and take keys out. next open door fully for 90 seconds. shut door. turn on truck. turn on radio and have sirius reset it. its called a soft reset.

Posted on Aug 07, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2006 dodge cummins wont turn over

odd,dodge used to run everything thru the ammeter,
thinking it would be electronic in 06 but,just my only thought!

Dec 16, 2012 | 2006 Dodge Ram 2500

1 Answer

After Changing the battery in my 2006 Dodge Magnum all the lights on the dash lights up and it's stuck in park

Forget about the dash lights, the brake light switch is bad, the shifter is powered through the brake light switch, change it and it will be fine.

Sep 01, 2011 | 2006 Dodge Magnum

1 Answer

My car 2006 dodge charger 6 has been overheating real bad, we have changed the thermosat the radaitor looks fine,we have done everything and its still overheating O dont know what to do no more

Hello perla_y_vill and thank you for asking your question, on Fixya.

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your 2006 Dodge Charger, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people like you. So here is the link:
How to diagnose your overheating Dodge Charger

Get more great, money saving, tips and tricks about your vehicle from:

Thanks for the vote, and good luck!

Oct 07, 2010 | 2006 Dodge Charger

1 Answer

2006 jeep commander check engine light stays on after jeep sat for 5 days in ice storm and was not started

I don't think I would be concerned about the vehicle sitting for 5 days. Get it scanned and work on a fix,for why the light came on.

Feb 15, 2010 | 2006 Jeep Commander

1 Answer

Can't found a blow fuse on a audiovox sirus sat


Oct 20, 2009 | Audiovox SIR-PNP3 SIRIUS Radio Receiver

1 Answer

Head lights on my 1997 dodge ram 1500 pickup stay on when i turn off ignition switch. it is not head light switch. pulled out of dash.

under the driver inner fender is where dodge usually put their daytime runnig light moduals find it,unplug it,the lights should be fine.if you don't need it by law everything else will work normally except the high beem light will no longer work.

Aug 29, 2009 | 1997 Dodge Ram 1500 Club Cab

2 Answers

Sirus dvd player in 2008 dodge durango Limited

its illegal to have a dvd screen playing where the driver can see it when they're driving. thats why it turns off when you put it in drive. it can but changed by switching some wires around but you can get a ticket for it if cops see it.

Dec 29, 2007 | Car Audio & Video

Not finding what you are looking for?
Eclipse SIR-ECL1 SIRIUS Radio Receiver Logo

3,211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eclipse Audio Players & Recorders Experts

Joseph Hoffmann

Level 3 Expert

1755 Answers


Level 2 Expert

226 Answers

Jose Ma DM.
Jose Ma DM.

Level 3 Expert

538 Answers

Are you an Eclipse Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides