Beeps and wont come on p60w26p zenith - Zenith P60W26 60 in. HD-Ready Plasma Television

This could be caused by multiple things. The first problem that comes to mind is a bad power supply in my experience. The second problem that comes to mind is possibly a bad t-con or backlight inverter board. Could you tell me, when the TV powers back off can you see a picture in on the screen if you shine a flashlight up to the display?

Check the audio settings and make sure that you did not set it to external speakers only.

4 beeps Timer Not Operational Memory failure in the first 64 KB of memory, or Timer 1 on the motherboard is not functioning. the site for BIOS POST BEEP code information

try to put it in the middle of the room to have ventilation do not cover any vent

ck menu for air or cable settings,air will get all cannels cable stops at ch 13

Components in Power supply are bad most likely a 35v 100ufd capacitor if not then your Flyback transformer is bad

Replace Lamp.

I am having the same problem, beeping and will not come on until the next day....did you find a solution?

xbs344 stuck on prgrogriv scan have sound but no picture

turns on but no display the model # p60w26 same problem