Hi!!!!! Hello i am having a canon color copier 1150 connected to Canon colorpass Z40e.the problem i have been facing is once i turn on the feiry it starts to boot but after detecting all the H/W of the colorpass its comes to a point where it has to load but then it gets stuck in the loading mode and dosent go further. i was thinking of reloading the hard disk, but was afraid that one i loose my feiry inbuilt software in the HDD then how would i get the s/w back. kindly send the solution to it. Thanks regards Amit

http://www.usa.canon.com/cusa/support/office/colorpass_controllers/colorpass_z20e_z40e_z400e/colorpass_z40e#DriversAndSoftware

Hello,

Please download manual of the canon clc 1150 from this link
http://www.e-servicemanuals.com/product-view.php?prod_id=314211150

thanking you
davevipul197

I cannot login to ColorPass z40e from Vista. How can I remove/change the login info from ColorPass ?

You may also try to get a UPS for your copier

The copier itself doesnt have a hard drive. Since you are talking about Fiery I assume you mean the colorpass RIP attached to the copier. A CD with the software on it actually came with the RIP but it was probably swiped by the dealer. In any case it needs a SCSI CDROM in order to load it. But all is not lost. The hard drive actually keeps a backup of the software on the hard drive itself. Kinda like a system restore partition on some computers. When you switch it on hold down the top right button until the diagnostics pass. then press "restore backup". this will take quite some time. Once it is done you will have to go back into setup mode and re-enter all the network settings. Dont forget the default paper size.

hello i know what your problem is phone me on 07764303923
canon trained engineer
advise is free

http://software.canon-europe.com/
you can find driver that address

You need to download adobe postscript driver and install printer on the mac using the adobe driver!

Normally only the canon service center will tel you what the error codes means. Suggest you call them .

get the hard disk reloaded ur poblem should be done with