Question about Emerson Televison & Video
I have an Emerson Jumbo Universal Remote and a Protron DVR device but I have been unable to control the DVR by either method of identifying the compatible code. If I use the automatic scan pressing the on/off button continually, after about 90+ iterations it will turn off and then I press the Enter key. The unit will not come back on unless I use the remote that came with the unit. If I turn it back on using that remote the Emerson remote will still turn it off but not back on again.
You Emerson Jumbo may not be able to control all functions of your Protron DVR but only "off" control seems to be an extreme limitation. I checked my Sentry "workalike" and found no codes for Protron.
Posted on May 17, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
My guess is that it's the same as the Shaper Image Jumbo remote. Go to http://mscustomercare.com/. There's pictures of both. I just downloaded free instructions, will try them myself tomorrow.
Posted on Jan 09, 2009
Hello kls1996... programming your remote is rather easy. The easiest way (thanks to The Sharper Image Jumbo Remote being a LEARNING SMART remote) is to do the following:
1 - Point the head of your Sharper Image remote at the head of your Sanyo TV remote (nose to nose so the clear bulbs on each remote are facing each other).
2 - Press the "TV" button on your Sharper Image remote (located in the upper left-hand corner).
3 - Hold the "LEARN" button on your Sharper Image remote (located in the left edge under the volume buttons) until the red light flashes.
4 - Press the key on your Sharper Image remote (e.g. Volume Up or +VOL)... the red light will go solid (indicating that it is waiting for a signal from the other (in your case Sanyo) remote.
5 - Press the key on your other remote (in your case the Sanyo remote) that you want programmed in your new Sharper Image remote... the red light will flash rapidly again.
6 - Repeat step #4 until you have programmed each key.
7 - When done... press the "LEARN" key on your Sharper Image remote. Your Sharper Image remote should be programmed to operate your device (in this case, your Sanyo TV).
NOTE: You can program other devices such as your VCR, DVD, VHS, SAT, CABLE, etc. and not just one device.
Posted on Jan 16, 2009
Posted on May 11, 2009
SOURCE: codes for jumbo universal remote
Codes for jumbo universal remote
Sorry to here about your emerson remote problems.
The best thing to do is go to emerson.com and search for your device by number.
You will be able to find and print all the codes you need for whatever devices.
Hope this information has been of some help.
Please rate your technician, as they take the time to answer your questions. !!
Even if you disagree, it shows us that you have taken the time to answer.
Posted on Jun 29, 2009
Tips for a great answer:
Jan 21, 2013 | Emerson Televison & Video
on Apr 30, 2010 | Televison & Video
Apr 18, 2012 | Emerson Jumbo Universal Remote Control
May 30, 2010 | Emerson LC320EM8 32 in. LCD TV
Feb 24, 2010 | Emerson Televison & Video
Feb 16, 2010 | Televison & Video
Jun 29, 2009 | Emerson Premier SR110 Remote Control
Jan 09, 2009 | Televison & Video
Dec 28, 2008 | GE RM24912 Universal Remote Control
Oct 13, 2018 | Emerson Televison & Video
21 people viewed this question
Usually answered in minutes!