Question about Kenmore 24 in. 17032 Built-in Dishwasher
Kenmore dishwasher would not start buttons lit up. I ran the diagnostic mode after which wash light flashes rapidly but it still won't start. Any suggestions would be helpful. Thanks.
Look at your manual, usually available on net for reading or downloading. Blink lights are often used to code out a problem with various combinations and repetition rates to indicate trouble code number for look-up in manual.
Posted on Feb 22, 2009
I was able to reset it using this procedure:
1. Crack the dook open
2. Within 3 seconds, press these buttons in this squence: Hi Temp Wash, Heated dry, Hi Temp Wash, Heated Dry
3. Close door
4. Press Cancel
That should clear the Blinking LED. It appears this is a common problem. The worst thing is they charge to come out for this.
Posted on Jan 13, 2010
Tips for a great answer:
Mar 31, 2016 | Kenmore Dishwashers
Jan 18, 2015 | Kenmore Dishwashers
Dec 18, 2013 | Dishwashers
Sep 03, 2012 | Kenmore 24 in. 15142 Built-in Dishwasher
Jul 02, 2012 | Kenmore Dishwashers
Jan 14, 2010 | Kenmore 24 in. 17032 Built-in Dishwasher
Feb 17, 2009 | Kenmore 24 in. 15142 Built-in Dishwasher
Dec 06, 2008 | Kenmore 24 in. 15173 Stainless Steel...
Apr 19, 2008 | Kenmore 17024 Built-in Dishwasher
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: