Question about Ricoh Aficio 3025 All-In-One Laser Printer

2 Answers

Lanier LD225 copier with a error code 541

I've entered the SP mode and performed a All Clear fuction. This occured after I rebuilt the fuser.I do not have a tec. bulliten for this copier. Any help would be appreciated.
Thanks,
Terry

Posted by on

  • psych0tech1 May 11, 2010

    what is the error code?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

What sp code did you use. It should have been 5810 or 7807.
It it came back after that you have bad thermistors or they are too far away from the heat roller.
They ride on the heat roller, no spacing.

Posted on Feb 10, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ricoh Expert
  • 393 Answers

All clear huh, wow, what error code do you have sp7-403 1 thru 10 will show you the last 10, a code of 541 thru 548 relate to fuser with the fuser out there is no gap between the hot roll and pressure roll right? -Carl

Posted on Jun 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lanier copier 5613 Error Code 549 What is it and how do I reset?


SP 5-810, press 1 hold down OK and original type key at same time to reset. -Carl

Nov 21, 2014 | Lanier 5612 Fuser Spring For Picker Finger...

1 Answer

LANIER 5637 FAULT CODE SC542 UPON POWER UP


You have a Fuser Temperature warm-up error, Hot roller warm-up error.
Verify the heater lamps, thermistor and thermofuse continuity.
Enter in the SP mode, turn OFF the main switch, unplug the machine, wait 10 seconds,
plug in and turn ON the copier.
If you need to reset the fuser,
Enter SP 5-810 (SC code reset) and
select "1". Then simultaneously press the Original Type key and the OK (or
R/#) key. (There is no need to turn the main switch off and on.).

Jan 22, 2011 | Lanier Printers & Copiers

1 Answer

Sc 541 power off on


sc 541 is a fuser error. you have to reset the code. here are the steps to follow.
press clear mode button once, clear mode button is the yellow one
press 107
press and hold clear/stop red button until you see the screen changes to copy sp mode written.
press copy sp on the screen and off and on the machine
it should reset the code.

Oct 26, 2010 | Ricoh Aficio 1035 Copier

2 Answers

What SC 541 is ?


sc 541 is a fuser error code. try these steps
press clear mode once
press 107
press clear/stop and hold it untill your screen changes to copy sp mode.
press copy sp on screen
off and on the machine. it shud reset its code. i am a Ricoh tech. email me if you are having difficulty. ronils_singh@yahoo.com.au

Oct 01, 2010 | Ricoh Aficio 450 Copier

1 Answer

How to enter service mode on a lanier ld225


Press Clear/Modes, then 107, then press AND HOLD Clear/Stop
This will get you into the service mode screen.
Know what you are doing before going into any modes and changing anything.
Good Luck and Thank You for using Fixya

Jul 20, 2010 | Lanier Printers & Copiers

1 Answer

Showing error message sc541


this is an error for the fuser the thermistors have not registered the temps properly check the fuser and if you know how to take it apart clean the thermistors.. you could try an sc reset using the following proceedure...Yellow clear button then 107 then hold down the stop button..wait for the screen to change to show copier sp turn off the machine and wait 5 secs then turn off. If this doesnt reset do the same proceedure on the copier sp enter this then look for mode 5. enter this mode and look for 810 sc reset and set this then turn off wait and turn back on....if this error occurs regularly the thermistors will have to be changed.. hope this helps..A

Jun 28, 2010 | Lanier Printers & Copiers

2 Answers

Cs546


The problem in the fuser unit.Check and clean the rollers ,thermistors,thermofuses.

Aug 10, 2009 | Lanier 1205 Copier

1 Answer

Service code 561 error


Hello sir; Just follow my direction, it will reset your machine;
1, press "clear mode", "107", then press and hold down "clear/stop" key.
2, touch "copier SP" on the screen.
3, enter "5810-001" press enter.
4, set value to 0, then turn power off and back on again.

May 15, 2009 | Lanier Printers & Copiers

2 Answers

Lanier LD060 has a SC541 Error Code


Troubleshooting tips:
Enter SP Mode by holding down "up" and "down" arrow for 10 s then you press "enter"

SC 541 Heating roller
thermistor error
The temperature measured by
the heating roller thermistor
does not reach 7 °C for ten
seconds.
• Loose connection of
the heating roller
thermistor
• Defective heating roller
thermistor
• Defective BCU
1. Check if the heating roller thermistor
is firmly connected.
2. Replace the fusing unit.
3. Replace the BCU.
Controller
errors CTL The error has occurred in the
controller.
See .Troubleshooting Procedure. in
the table.
A
The error involves the fusing unit.
The machine operation is disabled.
The user cannot reset the error.
Turn the main switch off and on.
Reset the SC (set SP5-810-1). Enter the SP Mode by holding down "up" and "down" arrow for 10 s then you press "enter"
Turn the main switch off and on. Also, check info on this link: http://helpdeskgeek.com/how-to/ricoh-aficio-cl7200-printer-sc541-error/ If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 11, 2009 | Ricoh Aficio AP600N Laser Printer

2 Answers

SC 541


Take the fuser out and clean under the thermistors, and reset the code by entering test mode ( turn off printer hold down online and escape as you turn on printer selece 2 engine go to sp5-810 and reset this.
-Carl, please let me know if this helps.

Jul 30, 2008 | Ricoh Aficio AP600N Laser Printer

Not finding what you are looking for?
Ricoh Aficio 3025 All-In-One Laser Printer Logo

537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts

quennie732

Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...