Question about Computers & Internet

1 Answer

Designing a document in book form and printing in Word 2007

I am having trouble using the bookfold in page setup with landscape and bookfold, two pages per page and printing it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When you select Book fold for your page setup, Microsoft Word prints two pages on one side of the paper. When you fold the paper, it opens like a book. This option is intended for documents that have more than two pages.
1. Set up your document as a booklet.
When you create a booklet, it's best to start with a new, blank document so that you have better control over the placement of text, graphics, and other elements. You can add a book fold to an existing document, but you may have to reposition some elements once the book fold is in place.
A. Start a new, blank document.
B. On the File menu, click Page Setup, and then click the Margins tab.
C. In the Multiple pages list, select Book fold.
If your document is not set to landscape orientation, Microsoft Word sets it to landscape.
D. In the Inside and Outside boxes, type or select the amount of space you want for the inside and outside margins (margin: The blank space outside the printing area on a page.).
If you need even more space along the fold to accommodate binding, type or select the amount of space you want in the Gutter box.
E. In the Sheets per booklet list, select the number of pages you want to include in a single booklet.
If the number of pages in the document exceeds the number of pages you select for a booklet, Word prints the document as multiple booklets.
F. Select any other options you want in the Page Setup dialog box.
G. Add text, graphics, headers or footers (header and footer: A header, which can consist of text or graphics, appears at the top of every page in a section. A footer appears at the bottom of every page. Headers and footers often contain page numbers, chapter titles, dates, and author names.), and other elements to your document as usual.
2. On the File menu, click Print.
3. Set options for printing on both sides of the paper.
If you're using a duplex printer (one that automatically prints on both sides of the paper)
Click Properties, and then set the options you want. If you have a choice of setting the page orientation and duplex options, select landscape orientation, and flip the document on the short edge or short side.
If you aren't using a duplex printer
In the Print dialog box, select the Manual duplex check box. Word will print all of the pages that appear on one side of the paper, and then prompt you to turn the stack over and feed the pages again.
4. Select the page range you want to print.
If you click Current page or Pages, Word prints the page you indicate, plus the three other pages that belong on the same sheet of paper.
If you click Selection, Word prints your selection using the default page layout instead of booklet layout.

Posted on Mar 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am printing a booklet using the bookfold option in Word 2007 on my Windows 7 laptop. The margins page has normal margins (1,1,1,1) highlighted. Page setup, in Word, says my margins are 1,1,1,1 with no...


Sounds like you need to go into Properties in the Brother, possibly in advance options for a setting that over-rides the printer settings for the page settings.

What happens if you choose a 1.5" right margin in the document.

Mar 25, 2017 | Brother MFC495CW

3 Answers

My book fold booklet is printing upside down when duplexed!


You may need to tell word you want your printer to flip on the short side and not the long side. With my Canon printer I get a drop down menu IN WORD (not printer setup) that gives choice of: print one side; print two side flip on long; and print two sides flip on short.

Jun 02, 2010 | Microsoft Office Word 2007 Upgrade Version...

2 Answers

How to print document in landscape


This can be set in the properties of the printer mentioned. you can also request the landscape format in the software you are using. for most printers it is found in the TABS: finishing, paper setup.

Jan 27, 2010 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Printing 'bookfold' documents


Does the print queue show that all the pages have been sent to the printer. Check the print screen to make sure that either page 1 or print current page are not checked. This type of problem is generally caused by the printing application rather than the printer.

Apr 15, 2009 | Brother DCP 115C All-In-One InkJet Printer

1 Answer

Trouble printing book made in Word 2007 using a HP psc 1315 print


Select the Page Layout tab, in the page setup group, select margins, The at the bottom, select custom margins. on the margins tab about 1/2 way down, select the down arrow next to Multipl epages and select 2 pages per sheet. Print a couple test pages and see if that is the setup you need.

Apr 06, 2009 | Microsoft Word 2007 for PC

1 Answer

Lexmark X7170 - Landscape orientation doc prints on bottom of a portrait page, not landscape


Go to print setup and go to properties then adjust the settings to the full page . right click on the default printer icon to go to properties.

Nov 06, 2008 | Lexmark JetPrinter X1185 All-In-One InkJet

2 Answers

HP 1280 Error message


well...the printer settings will be the key. open them up and make certain that you're tray assignments are in line with your A4 paper.




Aug 20, 2008 | HP DeskJet 1280 InkJet Printer

1 Answer

HP Photosmart 6150 AIO


Sounds like it might be the same problem I had on my HP C7180. It seems to be rampant throughout their Multifunction printers.

My Fix, combining several others:

1. Go to Printers and Faxes on your Start Menu. In the Printers window, select Server Properties from the File menu. Use the Forms tab of the Print Server Properties dialog box to view printer forms. You may also see lots of forms that you wish your printer could see, but don't worry, it'll see the one you create now. And be sure when you create your form that you use the narrower dimension for the width and the longer dimension for the height. Usually for envelopes you will print in landscape mode.
2. Select the Create A New Form check box.
3. Enter a new name for the Form in the Form Description For field.
4. Use the fields in the Measurements area to set the paper size and margins. *Use the narrower dimension for the width and the longer dimension for the height*.
5. Choose the Save Form button to save the form. The Save Form button only gets pick-able when you type in a different name than what's there already.

Now go to your document program, such as Word. Make sure the window for the document you want to print is the active window. Select File/Page Setup..., Paper Size Tab, and there select the form you just created from the dropdown list

Still in your document program, select File/Print... then Properties. Select the Features tab, which may be differently named. Under Resizing Options/Size dropdown, select More... and there you'll find your newly created form down at the bottom, under Custom. Pick it.

If you're printing envelopes or other things where the way you view it it's wider side-to-side than it is tall, be sure and select "landscape" in both "page setup..." on your document program and in File/Print.../Properties/Features?Basic Options.

When I did all this methodically, I was able to print my Christmas envelopes. Yay!

Jul 29, 2008 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Printing landscape instead of portrait


this article may explain how to change it
http://hints.macworld.com/article.php?story=20070613051850612

Mar 05, 2017 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

Printing 2 pages on landscape document


Usually if you see the page in the Publisher window is already landscape, it will go landscape in the Printpreview and also in the print out. I just try to imagine what is your problem.
If I am not mistaken, this is what you did:
You have two "small" pages (maybe A5??) and you want to print it in one page of A4. Of course the A4 should be landscape.
Publisher does not have the facility to set 2 pages A5 in one A4 like in Microsoft Word.
The easiest way is just create a new page with A4, then copy the 2 pages (or you called it flyers) and paste it in that A4 landscape page.
Publisher can do print 2 pages A5 in one sheet A4 but the arrangement is as booklet. You can see the choices in File --> Page Setup --> tab "Layout" --> scroll the Publication type.
I do print 2 pages A5 in one sheet with many variations using addition software named "Clickbook".
Let me know if I m wrong in interpret your problem.

Feb 10, 2008 | Adobe Photoshop 7.0 for PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...