- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Couple options . pint a status report by holding down the main button until the printer starts making noise. Or browse the menus for Then look at the printed report for Toner, Drum, ect usage.
Or if its a network printer Surf to the printers IP address and look at the status pages of the printer.
last option. browse the menus with the button look for
menu button >> information > something like status report
cheers . ps sometimes yellow is "sleep" meaning power saver mode.
Thomas You need to get yourself a pint bottle or even two pints of ink solvent and a syringe and spray it into the print heads where you removed the ink cartridges and let it set about two hours. don't be conservative with the solvent. Please read the manual for your printer and after you run the printer through several cycles you will see the differences put the old cartridges in the trash and install new cartridges. this can be prevented if you run the printer through its self test and run clean print head cycles. NOTE: put paper towels in the bottom of the printer so as to not make to big a mess