Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

2 Answers

I CAN NOT PROGRAM MY BUILT IN CAR REMOTE ON MY NEW 139.53985DM

BOUGHT NEW CRAFTMAN DOOR OPENER MODEL 139.53985DM CAN NOT GET MY CARS BUILT IN REMOTE TO WORK TRIED EVERYTHING

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have craftsman 1/2 remote liftmaster how to program the remote thankyou

Posted on Jun 06, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 244 Answers

Didnt try everything cause if you did, it would work! Get two people and garage door opener. One read manual from car under Garage door" or Homelink while other pushes button. When manual says if this did not work or if you have security plus or rolling code, continue with other instructions. You will need a working remote and will need to pushh learn button on motor logic board.

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program my Sears Craftmans 1/2 HP garage door opener


Stacy, get a ladder and climb up to the opener. The directions are there, but typically you press a button for x seconds, and then press a button on the remote. This handshakes the two units. continue for other remotes.

Jul 06, 2015 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Craftman 139.53753 remote how to program


Push the learn button on the opener
an then hold the remote under the opener an hold the button on the remote till the lights flash on the opener you have about 10 sec. to do this

Jun 25, 2014 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I recently bought a house which has a craftsman 1/2 HP garage door opener. The garage door opener works fine using the wall mounted pad and also the numeric key pad, but not with the remote that came with...


If you didn't, try programming the remote this way.

Press and hold the button on the remote and then press and immediately release the smart/learn button on the motor unit. If this doesn't work you need to make sure you have the correct remote for the model opener you have. Your model number doesn't bring any results from Sears Parts.com.

Nov 10, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

In December 2009 I had a new garage door opener installed. I have 2 remotes for this unit. One just quit working. How did I fix it? It is a Sears model - Craftman 315 #139.18191. It is not the battery...


I don't trust batteries even when they are new. Try taking the battery out of the remote that is working and install it in the remote that isn't. If that doesn't work you need to purchase a new remote.

Nov 04, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

My Craftman Garage Door Opener is approx. 7 yrs old. Remotes work fine. Keypad acknowledges receiving code, but then will not open door. Installed new bsttery.


If your keypad is the same age as your door and worked before it has probably just quit. If it is new and you have programmed it and it still doesn't work it may be the wrong one for your model opener.

Oct 04, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Can only program one remote


You have a remote or keypad that has reverted to an earlier technology. You need to eliminate the bad unit and the others will program. Sears is made by Chamberlain which also makes Liftmaster and several privately branded openers.

Jun 06, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Programming remotes for garage door


sounds like you are doing keypad ok. is battery good. as far as homelink in car. follow directions for rolling code/security plus.

Dec 13, 2008 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Craftman garge door opener changing code on key pad


having all the remotes you want programed with you, find learn button on back of opener. hold button until little light goes out- no remote will work now, with each remote Press learn button once,Press big button on remote-light bulb on opener will blink on/off if bulb is working-do this each hand held-keyless is same way, put you 4 #'s in HOLD enter button-light bulb blinks on/off you have 15 sec. for each time you hit the learn button. also best to start off with new 9 volt battery before you start programing

Aug 19, 2008 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Garage Doors Experts

Al Clark

Level 2 Expert

290 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Pieter Vleeshouwers

Level 3 Expert

1414 Answers

Are you a Sears Garage Door Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...