Mobile DVD My PADVD-340 does not show color. I checked all the wires and everything seems to be ok. Help?

i need someone to show me how the wires go in the back of radio

That is going to be hard to find anywhere but from the manufacturer. I would give them a call or email @ Website:http://www.poweracoustik.com

Street address:5920 E.Slauson Ave

Commerce, CA 90040

Phone:323-722-3333

You cant insert a dvd disc? maybe the loading mechisum is faulty. if the dvd is inserted (hear it spinning) but no picture the reader could be faulty or the easy to fix option the out wires arn't in the correct order or colour.

Look on the harness of your video player there will be a wire marked parking brake that has to be hooked to the brake so when the the brake is applied it supplies a ground, you can also ground that wire and you should get a picture.

Sometimes 88.7 , 89.1 just run a scan and wherever the radio sounds clear then thats your station, make sure to preset it in your memory.

Good luck.

i lost my remote to my padvd-330 where can i get another one from

you should check the speakers next. did the speakers work prior to installing the radio? check the wire harness used to connect the radio to the car speakers that is behind the panel and make sure everything is connected correctly. please rate me if this helps. thanks and good luck!

if your pioneer radio has the light blue ipbus/changer plug on the back of the radio, you can use this adapter and turn on the <aux> in the menu where you set the clock.

http://cgi.ebay.com/Pioneer-IP-BUS-Aux-In-Input-Adapter-CD-RB10-for-iPod-a3_W0QQitemZ400030920263QQcmdZViewItem

did you ever get the manual?

just check the data transfer wires.may ur probles sloved