I have hp 530 laptop. The seller did not give me the Windows CD for this product. I have installed Windows XP 2007. It became corrupt. So I formated the hard-disk, and installed it again.
Now my laptop does not run audio programs. Previously, i searched the drivers from internet, and the system searched & downloaded them automatically. But this time, I have tried a lot and could not succeed.
Please suggest me what should i do? My MediaPlayer also does not run. It requires a DVD Decoder.
Following drivers/ devices are required:
Audio device on High Definition Audio Bus
Modem device on High Definition Audio Bus
Kindly tell me how can i get them, and retain them for future use so that i don't face same problem again.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need the Recovery CD for your model HP laptop or a Windows XP installation CD plus the product installation code. The product installation code is printed on the Windows XP label that is attached to the bottom of your laptop.
It is only Windows 7 that gives you sound after formatting.
Meanwhile try this www.google.com to search for your Laptop product and model support e.g. "HP 530 Support".
Then locate the official website of your laptop to download the sound after confirming your operating system (e.g Windows XP Professionals).
all u need to do just enter either "Delete" or "F2" button when u turn on ur computer then go to bios section and change the boot sequence to CD-ROM first then save and exit
aftert that put in ur CD-ROM any bootable windows xp cd then it boot by itself then follow the instruction to format it and install new O/S
1 - Place CD in the Drive 2 - Restart PC and go into Bios by pressing Del, F2 or whatever instruction the start up screen says.
3 - Go to Boot configuration and set it to Boot from CD 4 - Save and Exit 5 - Follow onscreen instructions untill you get to the Windows install screen. 6 - You may have to create a partition (Drive Letter) on your hard drive if nothing was there before, you can assign as much hard drive space as you want to this. If your not sure just use all the space available. This will be your C drive. 7 - Pick the drive you just created and install windows on it using the on screen menu. It will ask you if to format the drive, say yes and use NTFS not FAT as NTFS has more features. 8 - Just say yes to all questions asked after this point.
When windows is installed it will ask you for a CD key and to activate by going on the net, I'm afraid I can't help you with this.
Place cd into drive.Keep pressing enter until the computer reads the cd.Follow the directions on the screen. That is all their is too it. How did you get an HP without an operating system having been installed?
thsi is a windows disk, correct? Not a reinstall disk?Should work the same either way. If it gives yuo an error or doesn;t work please tell us what happened and we will direct you more. Thanks
you have to use a standard windows start up disk with cd rom support like win 98 works well so the computer will recognize a older version then insert it and boot the computer with the operating system that u want to install but be advised if you have a warranty on the machine you will void the waranty i found out the hard way i had xp on my toshiba laptop and i put windows me on it couple of months later i had a cd rom issue and sent it to the manufacture and found out that the waranty was voided because i put a different operating system on the machine
I found it!!!>>>
Just go to Toshiba support web site Download the Storage Manager Driver for XP 32 then have an External floppy drive with formatted Disk ,install the drivers Files in the floppy connect the floppy drive put the XP sys CD Boot from the CD as in Solution #1 or by press on F12 tell choices boot screen popup select the CD then after that when the third party appear press F6 to chose the Driver for HDD to get recognized by the system. J