Question about Venturer STS-35S System

1 Answer

A new problem that has hjust appeared is the price of the question, which is to rich for me mark

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Let me get this straight, right off before we go any further. I found your site and thought perhaps i might find a solution or even a manual for it. I ask a question, and to provide me with an answer to that question, you want 19.99 cents. Am i wrong , here? To get the answer to one question cost way to much for my pocket book. Now because i told you in the mail that you sent to me, that the answer was not within my range nor stupidity. Now you write me and ask me to give you the answer to my problem, how i fixed the issue. Tell you what,,,,,,,,,,when you send me 19.99 cents, i will be more than kindly provide you with the answers.

Posted on Dec 26, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to find a DVD loader for Philips MOdle HTS3154 part (996510001630). Can anybody help me locate one?

Have you asked a TV repair place yet there are some small shops that fix DVD players we have one here close by at Plainfield Pa . Look in the white pages of your phone book marked business sometimes they will list . I have two that I have used and trust Ce Service center email or Hoover's Tv repair he works on dvd players 717 243-3797 sometimes it is cheaper to replace than fix depending on price of part. Hope this helps

Dec 15, 2014 | Philips Audio Players & Recorders

1 Answer

Cant get engine light to stay off on a 2003 saab 95 estate 2.3t. replaced di unit and plugs, light went out for a week then came back on again. any ideas??

That light can come on for any number of reasons, even not having the fuel cap tight enough. If the O2 sensor detects rich exhaust or any other sensor picks up something too far out of spec then it will flip the light on. See here: Lots of great FAQs at this site and a great place to get parts. I bought a couple of turbos and other things from them.

Let me give you a word of warning about the car you have. I had a 1999 Saab 95, same basic model you have. Same bodystyle. I loved the car when it was new but when it got past 10 years old, it became a money pit. Do yourself a favor and get out of it now. If you haven't had the A/C / Heater box break on you, you will. Bushings underneath wear out and then it pops all the time when you back up. Struts go out, the turbo disintegrates, the dash computer display goes out....just not worth it to keep up with. I bought a brand new Ford Mustang and am very happy. I can replace the parts for 4 wheels on a Ford for the price of one on the Saab. I have fond memories of that little turbo taking me to 140+ but after a while I just had to put the old girl out to pasture. Good luck. :)

Mar 02, 2014 | Audio Players & Recorders

1 Answer

I recently bought a Panasonic DMP BD85 Blueray player. I have been trying all afternoon to connect it to my home wireless network and am about to pull my hair out. All of the network indicators say that I...

I pulled up the specifications for the bd85 Blu-ray player. It says below that it has an rj-45 network connection. That means, although it says that it is WiFi ready, that it requires an additional WiFi Adapter of some sort to operate with Wifi. Or you could connect it directly to your router or switch using rj-45 cable.


Experience original movie quality with the DMP-BD85 Blu-ray Disc Player. In addition, the BD85 offers 7.1ch audio decode analog output, Wi-Fi Ready connection, ultra fast booting and access to various online content with VIERA Cast.
General UPC 885170000100 Number Of Discs Supported 1 Media Supported Secure Digital (SD) Video Upconversion 1080p Video DAC 12 Bit On-Board Decoder DTS HD Audio DAC 24 Bit Weight 5.70 lbs Service & Support Type 1 Year Limited Warranty BD Player Profile Profile 2.0 Slots SD Memory Card Output HDMI Interface Type RJ-45 Network Dimensions 2.19" Height x 17" Width x 9.81" Depth EAN 00885170000100 Sponsored sites
  • DMP-BD85 Sale Find DMP-BD85 at B&H, Low Price DMP-BD85
  • Dmp Bd85 10+ Dmp BD85 Products. Shop, Compare and Save at Pronto.
  • $180 - Panasonic DMP-BD85 Search low prices on Bountii. Great prices from stores you trust.
  • DMP-BD85 Blu-ray Player Get a Panasonic DMP-BD85 Blu-ray Disc Player for Less. Hot Deals!
  • DMP-BD85 Compare prices before you buy. We will save you money!
  • Dmp Bd85 On Sale Now Save on Recorders & DVD/VCR Combos. Low Prices on Dmp Bd85!
See your message here

Jan 28, 2011 | Panasonic Home Theater System System

1 Answer

Need new remote

EBAY is your best bet for a fair price. You may get lucky and find it on Craigslists as well. Or, you can purchase at any "Bose" chain store at the malls. Hope this helps

Jan 11, 2011 | Bose Lifestyle 12 System

1 Answer

No disk

The first thing to try is to run a "DVD" "CD" Player cleaner thru it, preferrably one that uses fluid. Run it thru a couple of times then try another disc. That's really all you can do. Manufacturers do not "repair" Players, it's too time intensive and cost prohibitive. They just swap out the existing transport in the unit for a new one. Price range from 100-150 on average. Hope this helps. If you still have a problem, reply as to what area of the country you are in and I can find service center near you.

Jun 01, 2009 | Panasonic Home Theater System System

1 Answer

My power switch has burnt out.

It is more than likely NOT the switch that has been destroyed. I am quite sure the switch could handle 1A without burning out.  What has more likely happened is you have damaged  some internal components. You will not be able to tell which ones by their appearance alone.  Is there a fuse on the board? check to see if that has blown.

Apr 02, 2009 | Vestax Pmc06proa Thin DJ Scratch Mixer...

1 Answer

Sterio no display no music

sounds like it could be the crystals in your lcd screen might be the problem or the battery that is on the electronic board inside might be out, if so than you might want to take it to an elctronic repair shop ask them to check it out first before any work is done after that ask them for a price quote you a price and get it in writing if you decide to let them fix it for you. hope this helps

Feb 28, 2009 | Audio Players & Recorders

1 Answer



It sounds as if you are doing everything right.

When you say you are selecting (or scrolling to) the operation that you want to undo (the MOVE AND PASTE) you would highlight that and then see a new undo mark ( > ) appear next to the step immediately preceding that. If your ( > ) mark is appearing on the MOVE AND PASTE it means that you have selected the action following it and need to select it instead.

The only other thing I can think that might have occurred is that you've had more than one MOVE AND PASTE that was already UNDONE previously and then some actions were performed after that (which will replace the 'undo' list operations from that point forward) so now that when you are UNDOing the MOVE AND PASTE it is another MOVE AND PASTE operation and not the one you are expecting. You may have to UNDO back a step further.

Feel free to try it anyway. You can check it and as long as you don't perform another EDIT or RECORD operation you can UNDO / REDO as required to try to get back to the point at which you wish to be.

Best of luck.


Feb 02, 2009 | Tascam 2488 Portastudio Multitrack...

1 Answer

Display showing "F61" some electricity failure

you have a problem with speaker cords:-
1-make marks with tape or any marker pen in all speaker cords(left-right-sub- front-rear).
2-after marking remove all speaker cords.
3-insert them one by one until f61 appear.
4-the cord that connected and make the trouble is bad please change it with new one.

Mar 07, 2008 | Panasonic SC-HT75 System

Not finding what you are looking for?
Venturer STS-35S System Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Venturer Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

69664 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13213 Answers


Level 3 Expert

98762 Answers

Are you a Venturer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides