Question about VCRs

1 Answer

Got no instructions

Need to tune in Video to tele. No instructions available. Have plugged machine in and am able to set clock etc so electrics working but cannot tune in to tele. Can't get a menu up on screen from remote so stuck. Have just plugged it in where old one came out.

Posted by on

  • phabpaula Dec 25, 2008

    That didn't work

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

1-The TV needs to be on channel 3.

2-On VCR remote set VHS/TV switch to VHS. (click it a couple of times until VCR channel shows on screen)

Posted on Dec 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Panasonic =iv NV-MV40 , how to set the clock please


You can download the user manual for free from the Panasonic website.

Apr 03, 2011 | VCRs

1 Answer

Can not find my instructions book to turn my freeview tv into my video recorder


If the TV has a scart then you don't need to tune it. All you need do is connect a scart to the VCR and TV. Then when you want to record anything, set the VCR to an AV setting instead of channel 1 etc. You need to set it to the one with the scart, as the VCR will have more than one AV looking at it's picture. You then just press record. You won't be able to change channel, or the VCR will record that channel instead.
If this is a problem, get a freeview box and just have it connected direct to the VCR.
If the TV has only one scart, you can get one of these boxes below.

97c8177.jpg

Feb 09, 2010 | Sharp VC-H812U VCR

1 Answer

Setup VCR to TV, using RF plugs & coaxial cable


The solution was both simple and elementary - why didn't I remember it sooner?
The TV needed to be 'tuned' to the video just as it needed to be tuned for each TV channel.
I selected channel 12 on the TV, went into the tuning mode on the TV and with the video playing, cycled through the TV tuning process until, Voila, there was the video showing on the TV.

Oct 14, 2009 | Philips VCRs

1 Answer

Need to retune Sanyo VCR VHR-610.


On the Sanyo VHR-610 you start the TV auto tune by holding down both the CHANNEL ( +, - ) buttons on the VCR simultaneously for more than 2 seconds.
The TV stations in your area will be automatically preset in order starting from programme position number "01"

When all available stations have been preset, the function will stop and the TV station preset to programme position number "01" will be tuned on your TV screen.

In other words after holding down the two buttons, leave it alone for awhile (takes some time) till it ends back at 01.

Cheers

Apr 07, 2009 | Sanyo VCRs

1 Answer

How to connect a vcr for recording programs


1 - To start with..
Plug aerial lead into the "RF input" on rear of vcr
--> now you can tape programs (providing vc is "tuned" correctly)

2 - Plug a lead from "RF output" into tv's "RF input"
--> now you can watch programs on tv _independently_ of vcr (ie can be watching 1 program & taping a separate one on vcr)

3 - Plug red/white/yellow cable from vcr's "VIDEO/AUDIO output" into tv's "VIDEO/AUDIO input"
--> now you can
1) play a tape in vcr, & watch it on tv
& 2) change what watching on tv via vcr's remote


* Note: This is for analogue terrestial television (aerial on roof), not digital/satellite tv, connecting to stereo, etc, etc (the "more involved " setups)

Feb 03, 2009 | VCRs

2 Answers

Panasonic NV SJ205 changing RF settings


Hi,
Your VCR has input to record video-audio signal. Here is 2 options to record program in vcr.
1= You need to hook up video-audio cable at Monitor Out in TV and video-audio in at VCR. select Line-1 or Line-2 (where you hook up cable) in vcr and insert cassette with Record Tab intact, VCR is ready to record TV program. select desired channel on tv and hit record button of vcr, recording will start.
2= Plug RF antenna / cable wire in RF In of vcr and tune desired channel in vcr (get help of vcr's user manual for that) and push record button to start record directly in vcr.
Have further query, let me know please.
bye.

Sep 09, 2008 | Panasonic NV-SJ205 VHS VCR

1 Answer

Setting clock on video player


Do you still have the remote for this unit?

Apr 24, 2008 | VCRs

1 Answer

Panasonic Video Recorder has stopped working


looks like some kind of sensor within the mechanical part, its seems like the mechanism doesnt return fully to its original point giving you these kind of malfunctions, I suggest to take it
to an authorized dealer for a complete check up & tune up

Apr 15, 2008 | Panasonic NV-HS1000 S-VHS VCR

1 Answer

Tuning my Toshiba V-711B VCR


Get your **** out and shake it around.

Jan 06, 2008 | Toshiba VCRs

1 Answer

How to set clock on Orion VCR VR0419


Most late VCRs require the remote box to set the clock, timed recording etc. Assuming you have the Orion remote, it should have a programming or menu button, and the function you need can be selected from a list of options. If the remote is an aftermarket unit (non-Orion), it must have the capability to do the advanced setup (clock set etc.). Many aftermarket remotes only do basic channel selection, and tape functions (play, rewind, stop, etc.).

Apr 24, 2007 | Orion VR0419 VHS VCR

Not finding what you are looking for?
VCRs Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top VCRs Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

alexander woolfolk
alexander woolfolk

Level 2 Expert

276 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a VCR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...