Question about Blue Microphones Blue Hat Little Shots Kids Digital Camera

3 Answers

Software "can't connect" to device even thoug camrea is saying USB

Posted by on

  • 1 more comment 
  • shofners Dec 26, 2008

    Same issues as other posts.

  • warings Dec 26, 2008

    I can use the camera with my mac ok, but still having this issue with the software.  Shofners - try just copying the photos from the "external drive" that shows up in the My Computer navigation and then delete them on the camera itself afterwards (don't delete them using the computer this way - causes problems).  Hope this helps....

  • Anonymous Jan 10, 2009

    I bought my son a Little Shots digital camera. It came with Camera Driver, but I cannot down load it to my PC? Can somebody help me? Thank you

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Warings keeps posting the same solution, but he should stop.

The link he provides IS to the "supposed" Mac drivers for this camera, but they are not. The Mac link is merely to a StuffIt file that contains the Vista drivers.
My guess is that the camera folks believe that by Mac users are running Vista on their Mac.
It's quite misleading, and ... it still leaves the original problem unsolved, depite warings' apparent irritation that people keep asking the same question.

Posted on Jan 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I downloaded current drivers and camera seems to work properly now. The drivers on the disk may have issues. Also, I carefully followed the users manual in terms of when to plug in USB and when to push buttons. Something finally clicked.

Posted on Dec 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i download games to my usb


You have to use v-link device that allows the vsmile to connect to website and internet. With this games can be played online or downloaded to device.

Jun 28, 2014 | V.Smile V-Motion Active Learning System

1 Answer

Either software or device issues? The software doesnt recognize the device!


Here's a lil tip 4 u...not all softwares work properly in a computer even if its installed/downloaded properly with the instructor's manual
try returning it back with your insurance guiding it then get a new one and try it again...good luck

Dec 28, 2011 | Vtech V.reader Reading System

15 Answers

Leappad tuneup stuck at 5%


This toy sucks. I've had a really crappy year, but three months ago I had a good month and had a little extra to spare so I decided to buy, for Christmas the Leappads my two daughters had been asking for since last year's Christmas.

All good? NO! After being very excited and seeing the happiness on my two little girls's faces when they saw their gifts I was very happy with the way this year was ending. Until it came time to get a few "apps" and connect to the internet etc. with these things. Nothing works, no updates, no registrations, nothing. To add insult to injury, I've my proof of purchase for these two items has been lost and I now have to sit my two little kids down tomorrow to let them know that their "dream gifts" are useless and may remain that way for the foreseeable future. I've plugged a lot of stuff into my computer and have never had any problems, until this little kid's toy came along and nothing works.


Way to go LeapFrog. I followed your instructions and am now stuck with two absolutely useless toys after spending the bulk of my Christmas day trying to get these stupid things to work!!!

Dec 25, 2011 | Dolls, Playsets & Toy Figures

1 Answer

My little sister has a MobiGo and when we try to connect it, the thing would say that it aint connected


Hi nito_juanito

Please everyone that comes across my info take a few seconds of your time to rate my solution which you can select at the bottom of my answer Was this solution helpful? YES or NO :)... As i have taken time to answer your question the best i can Thank You......

Before you can connect the MobiGo™ to your computer, you need to install the
software and register on the MobiGo™ website.
To begin the software download and registration process, please go to
http://www.vtechkids.com/download to download the setup file and registration
guide.
Once the setup process is complete, connect the MobiGo™ to the computer using
the USB cable provided.

For the instruction booklet you can download it here at this link..

http://www.vtechkids.com/_f/_pw/_manual/MobiGo%20console.pdf

nikkiallisto_25.png

Jan 26, 2011 | Vtech Mobigo Learning System

3 Answers

Can't get Mindstorms USB connection to work.


try:
  1. changing cables
  2. switching usb ports
  3. using bluetooth
  4. changing the batteries
  5. if all above fails call lego custumer support at 1-800-838-9647

Dec 26, 2009 | Lego Media Lego Mindstorms

1 Answer

The camera suddenly won't charge. And, my computer says it recognize the USB connection. Help!


Same problem here. We used it approximately ten times and now it won't charge (red light stays on). Even after resetting the camera as suggested in the manual. What can i do to solve this? We did open the camera and noticed that the red wire is hanging lose. Is this normal? Or do you have to connect that red wire to the battery? Has someone a more technical manual?

Dec 22, 2009 | Uncle Milton Pet Eye View Camera

1 Answer

Ion ied05


check out comment #2 in

http://www.wibwobweb.com/blog/articles-by-me/using-the-ion-ied05-usb-drum-kit-with-midi-capable-software/

that is a workaround that worked for me

Aug 30, 2009 | ION Audio iED01 Electronic Drum Set

1 Answer

My Ion iED05 Drum Kit Says connect module and wont work?


I had the same problem, still doesn't connect. I got Joy to Key application and Battery 3 demo and mapped the pads to the keyboard letters of the laptop and now it works, got the idea from:

http://www.wibwobweb.com/blog/articles-by-me/using-the-ion-ied05-usb-drum-kit-with-midi-capable-software/

Aug 21, 2009 | ION Audio iED01 Electronic Drum Set

1 Answer

When I hook up my Little Shots Camera it says can not connect to device


Uninstall all old pc cam,mars software and do a fresh installation. Restart computer.Before plugging in usb cable,push the shutter button down and hold it.Shutter is the button that takes the pictures. Now plug in usb cable. Camera should say pc cam and installation of software should start and complete. If asked about newer reference files answer yes. Software should now be installed. To use as pc cam,Dbl Click pc cam,mars icon on the desktop.New screen will appear.click on right facing triangle and another screen will open. Camera will now show on monitor what it is aimed at.To shut off,close all screens,and click on icon tray and shut usb device if necessary. To use as camera and view pictures,connect usb cable without pushing any buttons,and camera will say usb,Dbl click my computer,dbl click removable disk D,E F whichever it has been assigned,dbl click DCIM folder,and there are your pics to do waht you want with,save,print etc.Do not delete pics using the computer,delete only by camera so you do not damage files necessary to store and take pictures.If you do camera may have to be reformatted.Disconnect from pc same way by clicking usb icon in tray and stopping device,then its safe to unplug cable.

Dec 26, 2008 | Blue Microphones Blue Hat Little Shots...

Not finding what you are looking for?
Blue Microphones Blue Hat Little Shots Kids Digital Camera Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blue Microphones Dolls, Playsets & Toy Figures Experts

Iron
Iron

Level 3 Expert

3018 Answers

yadayada
yadayada

Level 3 Expert

61252 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Blue Microphones Doll, Playset and Toy Figure Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...