Question about Sony Cyber-shot DSC-T10 Digital Camera
have you tried resetting the camera? i had this same problem and i just went to menu>setup>setup1>initalize>OK and it went away completely.
have you tried resetting the camera? i had this same problem and i just went to menu>setup>setup1>initalize>OK
and it went away completely.
Posted on Oct 20, 2007
SOURCE: Its all chinese to me
You can download the English instruction manual here:
Go to page 23 - look at the icons to guide you
OR you can try this:
umust be having a jog dial on the top of ur digicam.it has a coloured image of camera. turn d dial to an image just below it(it shows a sign of a triangle). then press the menu button. go to the last seletion in d menu. it actually shows setup. go into it by pressing d centre button inside the 4 direction bttons. keep pressing d down button four times or untill u reach an image showing a briefcase and nder it written 1. now press the right button and go to the last but one option. press it and u get all d languages. select english .
Posted on Dec 14, 2007
Hi there, I now have two Cybershot DSC-T10 with broken LCD's. The best remedy that I have found is buy a parts camera with a good LCD on EBAY. You can get the whole camera for way cheaper than you can buy a new LCD.
Posted on Nov 21, 2008
This is a known issue with the DSC-T20 Cameras.
Check this link for more information and get it serviced to resolve the issue.
NOTE: Confirm the model # of the Camera whether it is DSC-T20 or DSC-T2.
Posted on Oct 09, 2009
if you alsow get vibrationOn Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
this was tested and worked on 2 additional cammeras
Posted on May 26, 2010
Tips for a great answer:
Sep 23, 2011 | Sony Cybershot DSC-N1, DSC-N2, DSC-G1,...
Nov 17, 2010 | Sony Cybershot DSC-T200 Digital Camera
Oct 19, 2010 | Sony Cyber-shot DSC-T10 Digital Camera
Jun 22, 2010 | Cameras
Mar 09, 2010 | Sony Cyber-shot DSC-T10 Digital Camera
Nov 17, 2009 | Sony Cybershot DSC-T200 Digital Camera
Sep 04, 2009 | Sony Cyber-shot DSC-T10 Digital Camera
Sep 26, 2008 | Sony Cyber-Shot DSC-T1 Digital Camera
Mar 25, 2008 | Sony Cyber-shot DSC-T10 Digital Camera
Feb 06, 2008 | Sony Cyber-shot DSC-T10 Digital Camera
211 people viewed this question
Usually answered in minutes!