Question about TV Accessories

1 Answer

Can't download Sims 2, how do I download graphic adapters?

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Downloading a commercial software product, such as Sims 2 is illegal. So, I suggest that you purchase an original copy of Sims 2 from a vendor.

Regarding the issue with your graphics adapter, kindly let me know the make and model of the graphics adapter. I can then suggest a few websites that allow you to download the drivers.

(Note: Graphics adapters are part of a computer's hardware. You cannot download them! I am assuming here that you meant graphics drivers, and not adapters.)

Thank you!! :)

Posted on Dec 25, 2008

1 Suggested Answer

  • 56 Answers

SOURCE: hi i've just had my computer ugraded to windows 7

The error message is correct. Windows 7 is not backwards compatible with certain graphics adapters requiring DirectX support higher than 8.0.
You should attempt first to install the proper driver for your graphics adapter from the manufacturer, and if that does not fix the issue, you should either install a new graphics adapter, or revert back to Windows XP.

Posted on Mar 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not supported interface


the drivers might not be installed correctly you might have to uninstall the graphics card restart your computer then reinstall thye graphics card and its drivers

If your computer came with a motherboard disc the drivers could be on it

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers

http://download.cnet.com/%7Bvalue=http://www.download.com/tv-nywhere-ms-8876/3000-2108_4-10199391.html

hope this helps

Jun 19, 2011 | MSI TVAnywhere Plus (TVANYWHEREPLUS) Video...

Tip

For better video quality with EasyCap USB video capture card:


1. Install FFDShow codecs to Your Windows: http://adf.ly/1310198/ffdshow-codecs
2. Use gold plated cables and adapters - s-video is normally a little bit better than composite
3. Check that all contacts between devices, cables and adapters are tight enough
4. Do not use any extension USB cable - put EasyCap/EzCAP straight to the computer's USB port
5. Switch off all other programs during capturing
6. Capture with max resolution 720x576px PAL, 720x480px NTSC.
7. You must have a powerful computer - check that CPU Usage is under 50% during
capturing and if it goes over, so buy more RAM and/or better processor and/or
better graphic card and/or faster hard drive.

on Mar 13, 2014 | DekCell EasyCap USB 20 Video Capture...

1 Answer

I have Kensington universal multi-display adapter product#33928US and running Windows 7. Installed device and I have no display on monitor. I installed the latest driver for DisplayLink but still no luck....


Test the PSU if the units fan is not working the power supply unit is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error If your computer came with a motherboard disc the drivers could be on it or you might have a dirty graphics card remove the graphics card and clean the socket
hope this helps

Jun 12, 2011 | Kensington UNIVERSAL MULTI DISPLAY ADAPTER...

1 Answer

I need driver card capture rtx100-board rev.02


Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers

if your computer came with a motherboard disc the drivers could be on it

cnetdownload.com on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need or major geeks download this graphics driver this will depend on your operating system

http://download.cnet.com/%7Bvalue=http://www.download.com/ati-catalyst-display-driver/3000-2108_4-10608736.html

This is a WHQL release from the Release 260 family of drivers. This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs. What

May 27, 2011 | Matrox RTX100 Video Capture

1 Answer

The ODS menu on my screen monitor pops up by itself and the BRIGHTNESS setting goes down to zero. When I press the exit botton or any of the other menu bottons and they don't work. Also, the on/off...


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error If your computer came with a motherboard disc the drivers could be on it or you might have a dirty graphics card remove the graphics card and clean the socket
click start control panel,display,desktop you can select a different desktop from the drop down list
or a browse button where you can select different pictures this may vary depending on your operating system

also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size larger size or custom settings
always click APPLY after making any changes
also

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers

if your computer came with a motherboard disc the drivers could be on it

cnetdownload.com on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need or major geeks download this graphics driver this will depend on your operating system

http://download.cnet.com/%7Bvalue=http://www.download.com/ati-catalyst-display-driver/3000-2108_4-10608736.html

This is a WHQL release from the Release 260 family of drivers. This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs. What

May 24, 2011 | TV Accessories

1 Answer

Sir, i purchase a UMAX Tv Tuner - TV5821. Its ok but suddenly change the resolution and then no display so "Input Not Support". So how i can set the resolution that picture is...


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error If your computer came with a motherboard disc the drivers could be on it or you might have a dirty graphics card remove the graphics card and clean the socket hope this helps


Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers

if your computer came with a motherboard disc the drivers could be on it

cnetdownload.com on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need or major geeks download this graphics driver this will depend on your operating system

http://download.cnet.com/%7Bvalue=http://www.download.com/ati-catalyst-display-driver/3000-2108_4-10608736.html

This is a WHQL release from the Release 260 family of drivers. This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs. What

May 18, 2011 | KWorld 1680 TV BOX HIGH-RESOLUTION...

2 Answers

Hi i've just had my computer ugraded to windows 7 but i cant play my sims 2 it keeps saying that i need directx 9.0c compatiable graphics adapter for it. but it was playing on my windows xp fine untill i...


The error message is correct. Windows 7 is not backwards compatible with certain graphics adapters requiring DirectX support higher than 8.0.
You should attempt first to install the proper driver for your graphics adapter from the manufacturer, and if that does not fix the issue, you should either install a new graphics adapter, or revert back to Windows XP.

Mar 09, 2011 | Compaq TV Accessories

1 Answer

I need to get a wireless adapter download for my


Did You Try Download.com Or filehippo.com?

Jul 18, 2009 | TV Accessories

1 Answer

Failed to intialize render . hardware T&L but not supported by adapter .


it means that you ae not having and separate graphic card , you are using your motherboard's on board graphics adapter

please get any graphic cards like nvidia geforce 7 or 8 or 9

Apr 04, 2009 | Encore ENLTV-FM-HA (CTETVC)

10 Answers

Gigaware USB to Serial Cable software


No need for disc, don't worry.
Radio Shack/Gigaware 26-949 USB to Serial Cable drivers (32/64bit) can be found at driverupdate us
I hope I have helped you...
Take a look, and enjoy

May 07, 2008 | ASUS T2 P4P8T WO/CD/MDM FM AGP8X GETH WIFI...

Not finding what you are looking for?
TV Accessories Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top TV Accessories Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a TV Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...