Question about Frigidaire GLTF2940ES Front Load Washer
Hi my washer wont start the dispencer drawer front came off and it wont stay on.Now the washer wont start and it gives an error ddo on the display
Ok, I got mine to work. Push the button down on the back side of the soap dispenser that says push down or push here (to take the tray out). When you have it out you will want to turn it over and there are 3 or 4 white tabs. You will want to pop the front part of the drawer off and then on the bottom about an inch in/down there is a small slot to put it into. It is the same size as the magnet and the magnet goes with the squares on the top and bottom. You cannot actually see the magnet when the drawer is put back together. When I talked to the service man he said they did away with the magnet on the new model. How stupid to put it there to begin with!! Hope that helps and if it doesn't ask again.
Posted on Dec 23, 2007
I found it on the right side of the drawer. pull it out and look for a space that is big enough for the magnet to fit length wise
Posted on Dec 22, 2007
You can also cut the sensor off inside the control panel and short the wires together. The replacement control boards have it shorted and ask you to discard the old sensor
Posted on Sep 29, 2007
The dispenser drawer has a magnet in it that has to line up with a sensor. if you can put the drawer back in that will solve the problem. if the magnet isn't lost.
Posted on Jul 29, 2007
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 12, 2014 | Electrolux EW1200i Front Load Washer /...
Hello geraldinerid - Typically DDO indicates that the washer has detected a problem with the dispenser drawer. Either the drawer is open and will not close properly or a further diagnosis is recommended to have a professional check the reed switch.
Apr 12, 2013 | Frigidaire Affinity ATF7000E Front Load...
Jul 07, 2010 | Frigidaire GLTF2940ES Front Load Washer
Jun 07, 2010 | Frigidaire GLTF2940ES Front Load Washer
May 25, 2010 | Frigidaire ATF6000ES Front Load Washer
Mar 29, 2010 | Frigidaire GLTF2940ES Front Load Washer
Aug 14, 2009 | Frigidaire GLTF2940ES Front Load Washer
May 08, 2009 | Washing Machines
533 people viewed this question
Usually answered in minutes!