Question about HP LaserJet 2840 All-In-One Printer

1 Answer

Error show on panel replace black cartridge

Hi,

my printer is HP 2840, error show replace black cartridge. i have changed new one already but still that error come up on panel.

Thanks and looking forward to hear from you.

seng

Posted by on

  • 3 more comments 
  • bfitzsimonds Jan 06, 2009

    I have the same kind of problem. I just replaced the red cartridge a month ago and now it is saying that a red one is not installed (which it is). If you have a solution to this please let me know.

  • rk77 Jan 08, 2009

    I have the same problem.....can you help


    rk@krilich.com

  • franzma Jan 08, 2009

    Same here. Replaced the empty yellow cartridge by a non-HP one (for the first time). It is not recognized. Same was happening to Magenta and Cyan. Black was not immediately recognized as being black, but it gave me the opportunity to accept it. So I cannot use any color right now. Does this point to a misalignment of the cartridge such that the chip cannot be read correctly?

  • Anonymous Feb 10, 2009

    changed all of the color toners with new, non-HP and it recognizes them but now doesn't recognize the black I've had in there all along. Help!

  • Thomas F. Schneider May 11, 2010

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

The replacement cartridge is a cheap imitation, that does not have the proper equipment to keep this error from reporting.

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there , I have a HP 2840 Color Laser Printer that is saying "Replace Supplies " . All cartridges are showing "empty" besides yellow . I only wish to replace the black cartridge and...


There is no option like what you are expecting. But now a days all chips are avil in market simply replace the chip & cut the cost...

Sep 12, 2011 | HP LaserJet 2840 Printer

1 Answer

HP 2840 *(Error Message) = replace supply using black only Will only print in black All color and black toner are 75% or more full The drum was low so I replaced it just in case but error message remains.


By repalce supplies, it means that you have to replace the other toner cartridges and that it is only going to print black only

Al
Eliteprintersolutions@gmail.com

Apr 14, 2009 | HP LaserJet 2840 Printer

2 Answers

HP 2840 Prints Blank Pages


Black is used on all prints. Did you pull the tape on the new cartridge?

Jan 13, 2009 | HP LaserJet 2840 All-In-One Printer

1 Answer

Engine error HP 2840


Hi Koilada,

Switch off printer and remove the drum and cartridges. Replace the drum and close the lid. Wait for the printer to prompt for cartridges and the insert the cartridges.

Rgds
S88

Dec 23, 2008 | HP LaserJet 2840 Printer

1 Answer

HP LaserJet 2840 replace drum


Have you checked status for the drum using toolbox or solution center? Try clean the contacts on drum and opposite HV pins in printer.

Oct 20, 2008 | HP LaserJet 2840 All-In-One Printer

1 Answer

Hp 2840 "Replace supplies"


If one of the color cartridges runs out the machine will switch to black only mode. However, I have found no way to force it to continue printing in color mode when any one of the cartridges runs out.

Apr 26, 2008 | HP LaserJet 2840 Printer

3 Answers

REPLACE SUPPLIES


Make sure all cartridge are install and secured into place...(take all the cartridge out and back in ) close front door cover and it will go into cartridge calibration...If not, press the "menu" key and with the arrow go to print quality and confirm with the enter key. Go to calibration and confirm...

Let me know....

Mar 26, 2008 | HP LaserJet 2840 Printer

1 Answer

Replace Cathridge


The front panel tells you witch toner cartridge should you replace. If a supply memory error ocures then the cartridge should be replaced or exchanged with a new one. The imaging drum unit is also consumable. for "Joe 50" - there are 4 toner cartridges in the printer.

Dec 28, 2007 | HP LaserJet 2840 Printer

Not finding what you are looking for?
HP LaserJet 2840 All-In-One Printer Logo

1,018 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...