Question about HP Pavilion dv6000z Notebook

5 Answers

How to turn off secondary buttons on my keyboard

I can't use my questionmark. On my key board there are all of the regular buttons bu on them they have blue symbols on them. I want to know how to deactivate the use of the secondary symbols on my keyboard.

Posted by on

  • 2 more comments 
  • kim_masaro Dec 27, 2008

    on my number keys and some of the letter keys there are green symbols above them.. all of my keys seem to be working normally except for the question mark key and the two keys to the left of it. these keys are showing the green symbol when i type them instead of the normal question mark, etc.



    any solutions??

  • lucy900 Feb 23, 2009

    Ive done everything that people say to do this is happening on word and I cant fix it, im so frusterated

  • terriebp Apr 15, 2009

    `HOW DO I TURN OFF THE SECONDARY KEYS. I ALSO CAN`T GET MY QUESTION MARK

  • Brian Ebeling May 11, 2010

    those blue symbols are functions for your laptop. is the question mark key the only problem key? want to make sure there isn't another problem before deactivating your system keys. would recomend against it BUT can do it, just wanna make sure the problem is solved first, ya know.

    let me know


×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem and it was driving me crazy, I must hit something when I type. Anyway the fix is hitting ctrl + fn and then the right shift key twice (just the shift key twice).

Posted on Jan 12, 2009

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When you hold ctrl+fn and click shift at the same time you are going through different modes of keyboard. Do it and then try the buttons that are not functioning the way you want them to. If not try same thing again. I think there are like 3 or 4 modes so you would not have to repeat it more often than that.

Posted on Jan 26, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hey guys found this on another site. Tried the first option and it works on my Gateway too

1. Near the bottom right of the screen is an icon of a keyboard. Left click and select US keyboard if it's set to French. This turns it off but it doesn't prevent it from getting switched again.

2. The permanent fix is to disable the key combination. There's two ways to do this. Right click on the keyboard icon and left click Settings. Select the "Advanced Key Settings" tab. Click the "Change Key Sequence" button and select "not assigned". Click OK a few times and you're done.

If you cannot locate the keyboard icon you can get at this through the control panel. Go to Regional and Language control panel. Select the keyboards and languages tab and click the change keyboards button. This takes you to the language settings described in step 2 above.

Posted on Jan 12, 2013

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You guys were my heroes that friggin worked thanx soooo much

Posted on Mar 17, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Hi,
HP Pavilion DV6000 Notebook main problem's are Power Problem, Vista Error etc..
For these problems you can visit a link by just Click Here .
For any other problems with this Notebook you can Click Here

Posted on Oct 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start up


hi , Reuben

I would suggest you try safe mode.
Safe mode is a troubleshooting option for Windows that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. The words "Safe Mode" appear in the corners of the display to identify which Windows mode you are using. If an existing problem does not reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes.
If you don't know the cause of the problem, you can use the process of elimination to help you find the problem. Try starting all of the programs you commonly use, including the programs in your Startup folder, one by one, to see if a program might be the cause of the problem.
Follow the steps to boot the computer in safe mode with networking:
1. Restart your computer if it is powered on.
2. Tap the F8 key after your computer initially powers on.
3. Once you see the Advanced Boot Options menu you can stop tapping.
4. Use the up/down arrow keys to highlight your selection.
5. Select Safe Mode with Networking and press Enter.
6. You should see drivers loading, and then please wait.
7. You should then be at the Welcome Screen.
8. Logon to your computer using an account with Administrator privileges.

May 27, 2015 | Computers & Internet

2 Answers

Are 2002 Aztec computers compatible


I am assuming you are discussing the 2002 Pontiac Aztec, the early crossover with the rather distinctive look. I would assume that since they were made by the same manufacturer and they used the same parts that their computers should be compatible. I can't say so for certain as you haven't provided much information, but, unless one of the Aztec owner swapped out the original computer and replaced it with an updated device, the computers should be compatible.

If you are thinking of trying to swap computer chips, I would advise you to wait and let a professional do it at an independent shop. The reason I suggest this is simple, unless you know how to access the computer chip correctly, you risk accidentally ruining it. If you handle the replacement chip incorrectly it is entirely possible that for a stray static charge to ruin the chip by blowing out a trace. Also, if you damaged the socket from which the original chip was removed then it is possible that you will not be able to reinsert the new device without bending any leads on the bottom. If the leads are damaged, then the new computer won't work.

Even if the new computer chip and the original chip were already installed in installable cases (the way most desktop computer chips are installed), it is possible that when you removed the computer, you might have damaged the receiving socket which means that when you go to insert the new computer carrier it won't work correctly because a few or many of the pins on the bottom of the board won't sit correctly.

Jan 03, 2015 | Computers & Internet

1 Answer

How to hard reset a WM8880 laptop


Power the unit off (holding power buttom) and selecting Power off, then simultaneously hold the "back" button and on button for about 8 seconds. When the android icon appears, press back buttom, in the menu select wipe data/factory reset pressing the home buttom and then press the back buttom, in the next screen select "yes delete all user data" pressing back buttom, and in the next screen select "reboot system now" with the back buttom and wait.

Nov 29, 2014 | Computers & Internet

1 Answer

Ibm thinkpad 2374 manuals


Does it actually have a wireless network adapter? Check the network adapter settings. Does it show both LAN and wireless? If it does you may need to use one of the Function keys to launch the interface to turn on the wireless.
73a6e6c6-e88a-4b74-a1c2-a74a2a1e5ed8.jpg

Aug 19, 2014 | Computers & Internet

1 Answer

Screeen is upside down


If you have a Windows OS, press and hold the ALT and CTRL (control) keys and then press the Up arrow. (If that doesn't work, try holding the Alt and CTRL keys and pressing the left (or right) arrow key twice.) If that fails, right click on the desktop (Windows+D will minimize all programs), anywhere with no running programs or icons. Then select the Screen Resolution option. Look for the line Orientation; use the drop down menu to select the correct orientation. Click Apply and then confirm the setting change if a confirmation window pops up. (This works in Windows 7 and 8.) For older Windows versions on laptops, you may need to select Graphics Properties (or a similar line) and then repeat this. The Windows screen rotation option is dependent on your video card. With some models, you'll need to open the graphics card properties to undo the rotation. You should see a line for the graphics adapter when you right click on the Display.

For Macintosh OS, make sure that the System Preferences is closed. Then open it by pressing Option/alt + CMD . Select the line Display. Find the button labeled Rotation: Standard then choose the correct screen orientation.

I hope this helps.

Cindy Wells

Jun 01, 2014 | Computers & Internet

1 Answer

I've a acer laptop model no 4820T. In this touchpad option not working but left and right button was working.... wats the problem n wat to do? tel me soon............."


Try the following: Using your FN key and the F7 Key together it might work again. You could have toggled the touchpad off. If that does not work you have issues with either the touchpad or the operating system. Best of Luck.

Sep 14, 2013 | Computers & Internet

1 Answer

How do i reset my computer to an earlier date?


Most computers have a RTC or "real time clock" in the BIOS. BIOS (or "Basic Input Output System") controls how data gets into and out from the processor (via keyboard, disk, etc.). Be careful making changes. The BIOS is normally only accessable when the computer is powered on or reset, and then only while performing the POST (or "Power On Self Test"). At this time your screen may display text describing memory, drives, controllers, etc. Some machine have a "silent boot" enabled which displays a manufacturer's graphic or logo instead of this data. It is during this time the the BIOS may be accessed. Depending on the manufacturer of your computer, a key (Delete, Escape, F1 or some other) or key combination (ALT + F1, ALT + S, or some other) will be needed. It is required to press the key or key combination prior to the Operating System loading message(s). This can be done be repeatedly pressing the key (or key combination) once every second (or two) during the POST. Holding the key(s) down the entire time - or pressing them too often will result in an error, and require starting over again.

Once the BIOS screen is presented, you will have to scroll the entire page(s) to find the clock. Most BIOS brands have more than just a single page of settings. Using the the up, down, left, right, PgUp, PgDn & Enter keys - navigate to the clock hours and minutes and adjust as needed. Make sure that you SAVE changes before exiting the BIOS screen. Upon exit, the computer will reboot with your settings.

Your Operating System may also provide a way for you to change the system time (and date) as well. Try clicking on the time / date to see if it will bring up a dialog box that allows you to make the change.

I hope this helps and good luck! If my answer was helpful, please rate it "4 thumbs up" Thanks!

Jul 27, 2011 | Computers & Internet

2 Answers

How to install bluetooth on my pc


Hello,
This depends on what kind of bluetooth you plan on using. Certain things like a Blu-Ray DVD Drive needs to be installed and hooked up internally in your PC, while something like Headphones or a Keyboard simply just needs a USB-based transmitter or a Bluetooth card that plugs into your computer.

Hope that helps,

Aaron Busch

Jan 01, 2011 | Computers & Internet

1 Answer

Mouse and keyboard have no power


If your mouse and keyboard work properly with another computer or laptop the problem could be :
A) if devices are USB :
- defective USB port : chose another USB port;
- USB port inactivated in BIOS : check and activate;
- motherboard defective : replace motherboard.
B) if devices are PS/2 :
- damaged PS/2 ports : buy a PS/2 to USB adapter for your mouse/keyboard or buy USB mouse and keyboard;
- motherboard defective : replace it.

Oct 04, 2009 | Computers & Internet

Not finding what you are looking for?
HP Pavilion dv6000z Notebook Logo

22,590 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...