Question about Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Hi, I have been using my dryer with no problems today then all of the sudden an hour ago it has a error code PF. I know that it means power failure but how can I correct the problem? Thanks!

Posted by on

  • redvelvet_75 Dec 28, 2008

    Thanks your info was somehwat helpful, it turns out that the power supply burnt out. Thanks!

  • bridgett42 Jan 11, 2009

    error e9e dryer runs in test mode but not normal mode

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

If the power did not go out and you have a pf code you may have loose conection to the power cord. reset the dryer (cancel button)
and if it returns check the conector block where the the power cord connects.

Posted on Dec 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Maytag dryer model: MEDE300VW0 that is showing a PF code. I have tried unplugging, pressing the cancel button, etc. as recommended on various internet sites. PF code persists.


i know that the voltage overseas is different form the usa,that's telling you there was a power failure while the dryer was running,check the back of dryer to make sure you have 240 volts going to the dryer,you could have a bad power cord or something to do with power source.

Feb 06, 2018 | Maytag Dryers

1 Answer

Maytag dryer has PF error code, but when use a extension cord it works fine?


Must be something wrong with the cord itself PF means power failure:

Codes and manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Sep 21, 2012 | Maytag Neptune MDG9700A Gas Dryer

2 Answers

Maytag MD5500 displayed a code PF. what does that mean?


Power Failure maytag whirlpool same same:

http://www.advantagesupplyfl.com/WhirlpoolDryerFaultCodes.html

Apr 17, 2011 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

We have a kenmore elite oasis dryer.one year old.just bought from some people only had it for two days.it was in the middle of a cycle when it suddenly shut off with the code af appearing where the timer...


An "AF" code means there is a low airflow condition and the clothes may not dry properly. To remedy this, check to make sure the lint screen is cleaned off and that there is no blockage in either the vent duct that runs from the dryer to the wall or the vent hood on the exterior of the house.

PF - Power Failure - PF error code indicates a power failure during the dryer's cycle.
Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 26, 2010 | Kenmore Elite Oasis ST 6807 Dryer

1 Answer

Kenmore elite he4 quiet pak 9 dryer display code


PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 15, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Error code PF


PF means power failure. Check your electrical connections and voltage for proper voltage

Jul 09, 2009 | Frigidaire AEQ7000ES Dryer

1 Answer

Whirlpool gas dryer doesn't run. error code pf shows on lcd


pf usually means power failure. Try to clear the screen or hit the off button to clear pf and then see if it works.

Nov 16, 2008 | Whirlpool GGQ8831L Gas Dryer

1 Answer

Code


The PF stand for Power Failure. When you unplugged it, it truely did have a power failure..

Nov 02, 2008 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Error code PF


PF means Power Failure!
Unplug both units for 10 minutes, then plug them back in and try operating them. You may need an electrician to investigate why you are losing power to both units

Jun 04, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Neptune Dryer PF Error Code


PF is a 'Power Failure' code meaning the dryer power may be interrupted. The plug receptacle may be bad. Check the plug for proper tension. If feels loose, have the receptacle replaced. Inspect the plug for discoloration. (a sign of a bad receptacle). If all looks OK, Check the power connections at the dryer. If looks OK the electronic control may be defective.

May 31, 2008 | Maytag Neptune MDG5500AW Gas Dryer

Not finding what you are looking for?
Frigidaire GLEQ2152ES Electric Dryer Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers

Marvin
Marvin

Level 3 Expert

81294 Answers

Sal De

Level 3 Expert

2699 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...