Question about Emerson EM-MS9700 6 CD-Changer stereo system Shelf System

Open Question

EM-MS9700 6 Disc Changer Stereo System - Won't play CD's

Tried playing cd's in all slots, same result, Display indicates a
"No Rdy" status, regardless of what I've tried. Can't locate owners manual. How do I clear this so that the cd player is useable

Posted by on

  • shadyladypdx Jan 11, 2009

    It's only 3 years old and I'm having the same problem - can anyone help??? no rdY

×

6 Suggested Answers

SOURCE: won't play a cd

put a mp3 cd it will work worked for mine has truoble reading regualr cds

Posted on Feb 08, 2008

SOURCE: CD player stops, won't open

there is a spring loaded mechanical switch under the cd rack that often breaks
I am trying to fix one right now and i am going to rig a three phase switch on the out side of the case

Posted on May 16, 2008

  • 1 Answer

SOURCE: 6 cd shelf system the door will not open

Here's where the owners manual can be found
http://www.emersonradio.com/owners/Music%20Center/MS9700_ib021903.pdf

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: Emerson ms9700

The disk would not spin. Removed 3 screws holding top "bearning deal" trying to remove it. could not get it off but disk would then spin. Worked even when i put screws back!

Posted on Jul 28, 2009

caroldon
  • 17129 Answers

SOURCE: Everything works on my emerson

If the indication says" not ready " it means that the disc is not reading the data present on it . It is possible that the disc is not scanned by the optical head to be ready to play.
So it is possible that the optical head is defective or weak, please try to clean the optical eye with ear bud very softly or use a disc cleaner.
If there is no result the head can be faulty.
If the set was not used for long time please keep it powered ON.
Also the processing section/main board can be a suspect.

Posted on Nov 19, 2010

  • 1 Answer

SOURCE: MY EMERSON MS9700 READS NO READY WHEN I TRY TO

I've been having similar problems. I've had mine over 4 years, so it is likely on its last leg. To resolve, nothing techno here, I take both hand an simultaneously give the entire unit a good "bang" on both sides. Sometimes it takes 2-3 attempts, but so far it has been working. I'm already on the look out for a new system, as i know this probably won't work forever.

Posted on Dec 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cd stereo says no disc


The player mechanism may have failed.

Sep 08, 2014 | Emerson EM-MS9700 6 CD-Changer stereo...

1 Answer

Everything works on my emerson MS9700 except the cd player. the display keeps saying no rdy. how can i fix this?


If the indication says" not ready " it means that the disc is not reading the data present on it . It is possible that the disc is not scanned by the optical head to be ready to play.
So it is possible that the optical head is defective or weak, please try to clean the optical eye with ear bud very softly or use a disc cleaner.
If there is no result the head can be faulty.
If the set was not used for long time please keep it powered ON.
Also the processing section/main board can be a suspect.

Nov 19, 2010 | Emerson EM-MS9700 6 CD-Changer stereo...

2 Answers

I have tried to record from Tape to CD with No result. I have followed the instructions for this task, to the letter and still nothing on CD.


Hi,
First make sure yoou are using correct cds. You need CDR Audio discs not blank pc media type (Yes they are different). Once you have the disc type right, make sure you are finalizing the disc as they will not play in other machines until u do this

Oct 30, 2010 | Electro Brand Nostalgic Stereo CD Music...

1 Answer

CD playing erratic


Run a "Laser Lens Cleaner" thru the unit a couple times. Use one that takes fluid, you can find them at just about any retail store for 15-20. If that doesn't solve it, it needs to be repaired. At that point weigh the cost over replacement. A new transport usually will cost 100-150 on average for parts and labor. Hope this helps

Jun 23, 2009 | Audio Shelf Systems

1 Answer

RCA RP-9515 stereo, CD player won't play


RD probably stands for "Reading Disc" and ND probably stands for "No Disc". If the CD player doesn't recognize any discs, then either the laser is dead or the motor has died. MOst likely you will have to replace the unit.

Mar 22, 2009 | RCA 100-Watt Stereo System With 5-CD...

1 Answer

No volume


maybe he invert the connection of speaker with the antenna wire-try also to make system reset (on-off)----remove power cabel and reinsert it check volume control in high level.

Jul 31, 2008 | RCA 100-Watt Stereo System With 5-CD...

1 Answer

Why can't I play my cds?


'no rdy' meens not ready so you disc tray is stuk take it a part and dose it make a noise az if the cogz are sliping if so the lil band in side you disc tray has broke

Oct 18, 2007 | Durabrand W600 Shelf System

1 Answer

Doesn't recornize Cd's and won't play cds


I have a AWM-2700U (3 disc changer) that was doing the same thing. I removed the cover and found that the laser lens for the CD player had come out of it "slot". I cleaned it with alcohol and a cotton swab and replaced it in the slot and it has worked for the past 3 months since. Hope it works for you.

Aug 20, 2007 | Sanyo AWM-2800 CD Shelf System

1 Answer

CD player


Could be the classic dirty lense syndrom... If you know how to get to it, expose the laser lense, and gently brush any accumulated dust/dirt from it. There might be multiple slots, but only 1 lense. If you have a cd cleaner available you might want to try that out first, it doesn't always do the same job, but it can save you the risk of something else happening when you open it up. Good luck

Dec 09, 2005 | Panasonic SC-AK70 Shelf System

Not finding what you are looking for?
Audio Shelf Systems Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Audio Shelf Systems Experts

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

EngineerMe

Level 1 Expert

6 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you an Emerson Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...