Question about GE Security DVMRe-16CT-600 16-CHANNEL Color Triplex Multiplexer-Recorder with 600-GB Hard Drive, Ethernet

1 Answer

Need to get video off dvr

How do I get video off this dvmre 16ct to store on a DVD disk

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Contributor
  • 14 Answers

From the user manual page 71:
5.2 Quick Archive to CD
Archive to CD on the Disk Analysis Screen by selecting the time and date and pressing the record
button. The QuickWave Setup must be set to ON from the Archive Setup → Quick Wave Setup menu
(see section 3.15). The Archive Incident menu should appear.
1. Use the Jog to modify the time parameters and use the
Shuttle to move between the Start and Stop fields.
2. Press the Record button on the front panel when satisfied.
3. The CD Writer will open the CD tray when completed.
The video may now be viewed on any PC equipped with a CD-ROM.

You can download the complete user manual here:
http://www.gesecurity.com/portal/site/GESecurity/menuitem.f76d98ccce4cabed5efa421766030730?selectedID=1965&seriesyn=true

Posted on Dec 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Default password


If memory serves me correct, most of the GE/Truvision etc. DVRs have to be sent back in for the password to be defaulted. I may be incorrect on this, will double check.

Jan 01, 2014 | GE Security DVMRe-16CT-600 16-CHANNEL...

1 Answer

Power supply DVMRe


The DVMRe uses a 12VDC, 4.0A supply. with center +
It's a standard barrel-type connector.
Note that if the supply isn't capable of 4 Amps or better, the unit will turn on, then go back off immediately, then try again forever

Dec 07, 2011 | GE Security DVMRe-16CT-1T 16-CHANNEL Color...

1 Answer

My GE Security DVMRe-16CT-1000 16-CHANNEL I power


Sorry this thing it garbage now.The hard drive have bad sectors on the boot up.This can't be repair except replaced the hard drive.Not worth to fix,if have to replaced the hard drive.

Jun 15, 2010 | GE Security DVMRe-16CT-1T 16-CHANNEL Color...

2 Answers

Dvmre triplex


I would switch monitors and see if the problem still exists. Sounds like the monitor not the Dvmre.

Aug 07, 2008 | GE Security DVMRe-16CT-600 16-CHANNEL...

1 Answer

Operating disk


Go to this site and download WaveReader software.
http://www.gesecurity.com/portal/site/GESecurity/menuitem.11620ebca5cc0a06574efe10140041ca/?vgnextoid=4f9fe4997e789110VgnVCM100000592d7003RCRD

Jul 25, 2008 | GE Security DVMRe-16CT-600 16-CHANNEL...

1 Answer

Installer code


Hit menu button, top right of jog, installer code is 3477, then use jog and dial to change settings. These must be done locally!

May 21, 2008 | GE Security DVMRe-16CT-600 16-CHANNEL...

1 Answer

Intaller code


The factory default code to reset the system is 8111, however this will reset all program functions back to the factory settings, with the exception of the time and date. The default Operator code to use the system is enter, enter, enter, enter. This should allow you to operate the system.

May 21, 2008 | GE Security DVMRe-16CT-600 16-CHANNEL...

1 Answer

No Audio


Check in the settings and make sure it is selected to be on.

May 14, 2008 | GE Security DVMRe-16CT-600 16-CHANNEL...

3 Answers

Help me!


I have strongly recommended that change your power supply with the same specification voltage and amp. I have installed so many GE DVR's most of DVR's restart when the power supply is not working properly or HDD have bad sectors. I also recommend use the scan disk on you HDD for proper checking of your HDD.

FROM
AI

Jan 29, 2008 | GE Security DVMRe-16CT-600 16-CHANNEL...

Not finding what you are looking for?
GE Security DVMRe-16CT-600 16-CHANNEL Color Triplex Multiplexer-Recorder with 600-GB Hard Drive, Ethernet Logo

Related Topics:

653 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Home Security Experts

Bill

Level 1 Expert

30 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Cindy Wells

Level 3 Expert

4945 Answers

Are you a GE Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...