Question about Umax Astra 610P Flatbed Scanner

1 Answer

Can you help me download my scanner

I bought my scanner ay a thrift store ,there was no disk with the scanner.i ask about the disk the man told me all i had to do was go on line and i could down load all i needed. could you please help me i am not sure what to do. i went to the section for the scanner on the internet and i found the one i have ,i tried to download every time i tried to download all i got was a add for a telephone, when i would close that page and try again ,i got the same thing. can you show me wha t to do thank you.

Posted by on

  • Anonymous Mar 01, 2008

    I need a driver for my Umax Astr 610P Flatbed Scanner, supported by Windows Xp

  • Anonymous Jan 27, 2009

    i have the same problems

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 196 Answers

Try here: http://www.umax.de/WebNew/index.htm In my experience, the German site offers more drivers.

Posted on Jun 03, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought it at thrift shop,new never used, no instructions, How do I use? can I use it on any scanner?


No these only fit on epson scanners due to the specific plug on the attached cable.you need and epson most models from 1200 series,1600 or 2400 series or 3600 will accept the transparency adapter.i have an old 1640 series that has one of these adapters.you can source a cheap scanner off eBay and download the drivers off epson site.then attach the scanner AFTER you install the software and it will find the scanner and connect to computer.Epson do provide a good scanning program as part of the download.you will need to choose negative or positive to scan.higher spec scanners have built in transparency hoods and can scan at higher resolutions.quite honestly if you are okay with say 6x4 inch prints a basic scanner is fine if it scans at least 2400 dpi.

Jun 10, 2015 | Epson Film Adapter EU33

1 Answer

I purchased radioreference premium, downloaded ACR300, downloaded Win97 bought cd download from radioshack and have the USB chord. Man this download is a **** kicker. still can not download freqs or t


Hi Kelly,

The best way to program any scanner is manually, rather than via software. Those things are fine if you know what you're doing, but it takes the fun out of learning how to use your scanner your way.

Downloading a frequency list for your location is as easy as searching the web by typing scanner frequencies for {you location}

Programming your scanner with only the frequencies you want from a list of local frequencies is better than filling it with frequencies you really wouldn't listen to anyway.

The Pro 97 is a relatively easy unit to program manually using the keypad.

Plus, you can download a copy of the user manual from the Radioshack web site or go instore and ask foe a copy for a very small fee(if at all), it will guide you through the steps of programming in a very east to understand way.

Highly recommended, and the return in scanning the airwaves is the best result.

I hope I have been of assistance to you.

Cheers,
Peter

Feb 06, 2013 | Radio Shack Pro-97 Handheld Scanner

1 Answer

LG GH24LS50 DVD-ROM Drive Plays Only CDs, Not DVDs...


Since you bought this used unit at a thrift store, it is entirely possible that it is defective.

Jul 24, 2017 | LG GH24LS50 Super Multi DVD±RW (±R DL) ...

1 Answer

I bought the game "I Have" at a thrift store and


here we go: http://www.ugames.com/rules/university_games/IHave.html

Mar 07, 2011 | Toys

1 Answer

I bought an ns501p @ a thrift store, it works fine, but the parental control has a password which i do not know and i am using a universal remote not the one manufactured for the unit...help ?


When you get to the stage when it asks for the password enter 199703 instead. Any problems get back and I'll upload the details for you to download

Feb 17, 2011 | Sony DVP-NS501P Progressive Scan DVD...

1 Answer

I have a Radio Shack Pro-96 Digital Handheld scanner with at least three channels locked out. My fault but would like to get them to work again as I have a $500 scanner and it is locked out on these...


Are you talking about banks? (0-9) If so, choose one sole bank (i.e. 7) and press MAN, then PGM, then TRUNK. Once here, Press the FUNC key on the left hand side and I believe you press "1" on the keypad afterwards. This will unlock the specified bank. If it is no "1", try the other numbers. Hope this helps...

Jun 05, 2009 | Radio Shack Pro-96 Scanner

Not finding what you are looking for?
Umax Astra 610P Flatbed Scanner Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Umax Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

5523 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

274 Answers

Are you an Umax Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...