Router Security I wish to put a password on my wireless router so that neighbours can not use my Internet service. I changed the Admin password in the Advanced Setup. However, I note that other devices in my home can still hook up to our wireless service. i.e. Wii, Ipod and daughters laptop. How do I require all users to have a password or that I authorize links.? thanks

open a webpage and type 192.168.0.1 in the ADDRESS bar........User name is admin....password is left blank............set your security settings as you wish

Hi

Login to the router and click the wireless and select tab wireless security and there you will change your desire password, after change the password, click the save and reboot the router.

Go to your router settings. Open up your internet browser, then type in 192.168.1.1 and press enter. There you can login to your router and change your network password.

Hi,

Wireless keys are like your secret password. Provided you have a wireless router and wireless devices to access internet - You might want to secure the wireless signals emitted by the router to ensure that your neighbour is not using free internet :-). So all you do is access the router's setup page and under wireless tab enable the wireless security feature.

Wireles security generally of two types
- WEP
- WPA

select the one suits best to your network and save the changes. once you are done with the router - you will now search for wireless network from your computer/s and select the network. The router will now ask you to type the password (the one you eariler entered on the router). Enter the correct password and you will be connected. Now your neighbours can see your network but cannot access it unless you share your password with them.

First RESET your router to defaults.
for that press RESET button for 10 seconds RESET button is in back side of router.
Then connect your router to computer with ethernet cable.
Then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.
Set WAN settings as your internet service provider settings.
Enable DHCP .
CLick on wireless and enable wi fi.
If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.
Let me know if you need further assistance.
Thanks.

you need to open internet explorer while you are connected to the router.

then type in the address bar

192.168.0.1 and press enter.. it will ask you for the ::
Default Username: Admin
Default Password: ( leave blank )

Then click on the setting for wireless security, choose a security type wep, or wpa, and create a password..

then save the password, and exit internet explorer,

now you will have to reconnect to the router, and it will ask you for the new password.. Now you network is secure and no one can log on unless they have the password.

You can get to the router settings menu by entering 192.168.0.1 or 192.168.1. in internet explorer. It should ask for a password and default is usually "admin". Once you are in the settings for the router you can configure the security settings for WEP. When you activate it you will create a password that all computers on the wireless network will use to connect to the router.

with the wrt54g you need to open a internet browser and navigate to 192.168.1.1
a security screen will pop up to which the username is "admin" and the password is either "admin or blank, (unless you specified otherwise when running the install.

once in click wireless then security in the sub menu (under the wireless link you just clicked) then fill in the boxes

Open a web browser like internet explorer or firefox. Enter the ip address of your router in the address bar of your browser. By default the ip address should be set to 192.168.1.1. You should see a box prompting you for your username and password.

Enter your username and password now. By default the username is admin, and the password is 1234. Click the Ok button to log in to your router

Click on wireless setup and you should have options there to change the security settings and setup a WEP key(password).

once you do this.
click on start
click on run
type ncpa.cpl
right-click wireless local area connection
click on view available wireless networks
and connect to your network again using the new password that you have just setup