Question about Linksys WRT300N Wireless Router

1 Answer

Linksys Wireless WRT300N

I don't see my Linksys when I pull up available signals. I looked at the Linksys and it doesn't have the wireless light on as it used too when transmitting. I reset and it still doesn't light up.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 142 Answers

Try going to the configuration page and check if it is sending a wireless signal.

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with the Linksys WRT300N Wireless Router No wireless light on router.


No wireless light on your router is a sign that something can be wrong with it, this can be a configuration problem or a hardware/software issue on your router.
The first thing that we can do here to correct the issue is to do a reset on the router and then after that the wireless light back back ON, to reset the router press and hold the reset button of it using a pen or paper clip for 10 seconds while power is ON and then power off and power on the router and check if all the lights are back including the wireless. Then once everything is OK you can now reconfigure the router like running the setup disc.

Jan 31, 2011 | Linksys WRT300N Wireless Router

1 Answer

My Linksys wrt300n wireless N router is slow


You have WRT300N router. If it is very old model then upgrade the firmware of the router. and try changing the wireless channel on the router.
Firmware is the software of the router.
Download the latest firmware of the router. Go to the manufacturer's web site and download the firmware of the router.
Open the set up page of the router and upgrade the firmware of the router. Once you upgrade the firmware of the router, reset the router.
On the router you will find a small reset button, hold it down for 30 seconds. release it. wait for 1 minute. Now unplug the power to the router and plug it back in.
Now you will need to reconfigure the router according to the Internet service provider.


Apr 27, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

My WRT300N Linksys router shows all lights, I've hit the reset button onece, but I can not get online without plugging the cable directly into my computer.


Since you hit the reset button on the router, it will go back to default settings.

By default, the SSID is linksys and the wireless security is disabled.

So on the wireless network connections on your computer, you should see linksys and then just connect to it.

However, it is advisable to change the default SSID and to enable the wireless security.

Follow this link to change the SSID.
Follow this link to enable wireless security.

Good luck!

Dec 30, 2009 | Linksys WRT300N Wireless Router

1 Answer

Linksys wrt300N wireless light not blinking


the wireless connections says limited or no connectivity when it does not get IP address from the router.
There might be problem with the wireless settings of the router.
if your network is a secured network then you will need to check the network key.
You can try to upgrade the firmware of the router. that will be a good option.
Click Here for step by step solution

Oct 29, 2009 | Linksys WRT300N Wireless Router

1 Answer

WRT300N is no longer detected


Hook up your ether cable to a port other than the WAN port.

Type this into a browser...

http://192.168.1.1

Linksys WRT300N Wireless Router. ... Default IP address: 192.168.1.1

Oct 01, 2009 | Linksys WRT300N Wireless Router

1 Answer

WRT300N wont connect wireless


Intermittent Connectivity:
NOTE: Before following the steps in this article, check if your wireless computers have stable connection when connected to other wireless networks (hotspots).
This article assumes that all wireless computers are experiencing intermittent wireless connection with the Linksys router.
Frequent wireless disconnection can be caused by different factors such as:
  1. Wireless interference within the network.
  2. Wireless settings of the Linksys router are still set to default.
  3. Firmware is corrupted.
Reducing Wireless Interference
If you are experiencing frequent disconnection from the wireless network, it helps if you check the following factors, all of which can greatly affect your wireless signals:
your cordless telephone system (or even your neighbors’), or other nearby equipment. Try to change your router’s channel to 1 or 11 (the default channel is 6) and restart the wireless computers.
Physical obstructions: Your router or wireless computers may be losing connectivity because of physical obstacles such as walls and floors. Try to move the equipment to different locations to find a better link.

Placement of the router: Linksys suggests that you place your router as high off the ground as possible. When placing the router in a high location, leave a distance of two feet between the router antenna tips, ceiling, and wall. If your signal passes through multiple floors, place the router on the upper-most floor and high up in the room.
  • Surroundings: Keep the router away from large metal objects, bodies of water (fish tanks, bathrooms), and any electrical equipment including television sets, microwaves, radios, etc.
Customizing Wireless Settings of the Router
Having default wireless settings on the Linksys router may cause conflict with other Linksys routers within your network range. Linksys suggests changing the SSID (network name) and the Wireless Channel of your router. Also, if it is possible, enable the Wireless Security of your router.
To change the router’s SSID or the wireless network’s name, click here.
To change the router’s channel, click here.
To enable the wireless security on the router, click here.
NOTE: If the wireless connection remains unstable after performing the steps above, upgrade the router’s firmware. For instructions, click here

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 01, 2009 | Linksys WRT300N Wireless Router

Not finding what you are looking for?
Linksys WRT300N Wireless Router Logo

Related Topics:

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...