Question about ASUS T2 P4P8T WO/CD/MDM FM AGP8X GETH WIFI (t2-p)

1 Answer

Gigaware controller on vista

And disable the dep

Posted by on

  • sexy_boy2_00 Dec 27, 2008

    where to find the application for the controller when disabling the dep

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Hi,

If a program is failing and you want to disable DEP to see if that is the cause. Here are the steps. (Just disable DEP for the program in question… don’t disable it for your whole system.)

1. Click Start
2. Select Control Panel
3. Select System
4. Click the Advanced tab
5. In the Performance region select Settings
6. Click the Data Execute tab in the dialog box that opens
7. Select Turn on DEP for all programs and services except for those I select
8. Click Add.
9. The open dialog box will open. Browse and select your application.
10. Click Open
11. Click Apply
12. Click Ok
13. Reboot

Hope this helps :)
Season's Greetings!

Chris (ziraffa)

Posted on Dec 24, 2008

  • chris grams
    chris grams Dec 27, 2008

    Hi again,

    In the DEP part, you turn on all DEP apart from what you are specifying. Now, you don't look for the controller, you look for the emulator you are using such as ePSXe or the game or whatever, and then make sure you run the emulator or the game as administrator. The point of this is so that the controller can now be configured/calibrated from within the emulator or game, when it could not be before. This is a thing to try after you have realised that it is not possible to calibrate the controller using the emulator/game.

    Let's start from the beginning:

    So you plugged in the controller. And downloaded and installed the drivers for it, restarted, and it then read the USB device and now appears in device manager? and says Device is working properly?
    So then you would have wanted to Calibrate the controller, and would have gone to Control Panel > Game Controllers > Double Click the Controller > Calibrate.
    After doing this, does the gamepad respond when you launch a game?
    If yes, then all is good. Enjoy.
    If not, then you would then open ePSXe (or whatever emulator), go to config, then gamepad and try to configure the
    controller there. If you can, then all is good. Enjoy.
    But if it still doesnt respond when you try to set the buttons, then we have to work out whether the problem is with the emulator or with the controller. And this is why we would turn off Data Execution Prevention for the emulator.
    Because we would then attempt to calibrate the controller and play a game again, and if the controller still didn't work, then there is no problem with the emulator, but with the controller.
    In which case it probably means the controllers usb drivers haven't been installed properly, or they were drivers for the wrong controller, or something like that.
    So, you are basically working out if DEP is the cause of the emulator not working, to isolate if that is the root cause of why you can't calibrate your controller.. you see?
    I know it's a pain to get your head round, and it's also difficult to explain clearly without getting lost in all the jargon, but just do each step at a time and I'm sure you'll get there in the end.

    Good Luck :)

    Chris (ziraffa)



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My google chrome crashed and everytime i click on it a message says DEP has closed it


To use hardware-enforced DEP, you must meet all the following conditions:
  1. The computer's processor must support hardware-enforced DEP.

    Many recent processors support hardware-enforced DEP. Both Advanced Micro Devices (AMD) and Intel Corporation have defined and shipped Windows-compatible architectures that are compatible with DEP. This processor support may be known as NX (no-execute) or XD (execute disable) technology. To determine whether your computer's processor supports hardware-enforced DEP, contact the manufacturer of your computer.
  2. Hardware-enforced DEP must be enabled in the BIOS.

    On some computers, you can disable processor support for hardware-enforced DEP in the BIOS. You must not disable this support. Depending on your computer manufacturer, the option to disable this support may be labeled "Data Execution Prevention," "XD," "Execute Disable," or "NX."
  3. The computer must have Windows XP with Service Pack 2 or Windows Server 2003 with Service Pack 1 installed.

    Note Both 32-bit versions and 64-bit versions of Windows support hardware-enforced DEP. Windows XP Media Center Edition 2005 and Microsoft Windows XP Tablet PC Edition 2005 include all the features and components of Windows XP SP2.
  4. Hardware-enforced DEP must be enabled for programs on the computer.

    In 64-bit versions of Windows, hardware-enforced DEP is always enabled for 64-bit native programs. However, depending on your configuration, hardware-enforced DEP may be disabled for 32-bit programs.
For more information about DEP, about DEP configuration, and for a list of Windows Operating Systems that support hardware DEP, click the following article number to view the article in the Microsoft Knowledge Base:875352 A detailed description of the Data Execution Prevention (DEP) feature in Windows XP Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows Server 2003For information about how to configure memory protection in Windows XP with Service Pack 2, visit the following Microsoft Web site:

http://technet.microsoft.com/en-us/library/cc700810.aspx

To confirm that hardware DEP is working in WindowsTo confirm that hardware DEP is working in Windows, use one of the following methods.Method 1: Use the Wmic command-line toolYou can use the Wmic command-line tool to examine the DEP settings. To determine whether hardware-enforced DEP is available, follow these steps:
  1. Click Start, click Run, type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command, and then press ENTER:wmic OS Get DataExecutionPrevention_AvailableIf the output is "TRUE," hardware-enforced DEP is available.
To determine the current DEP support policy, follow these steps.
  1. Click Start, click Run, type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command, and then press ENTER:wmic OS Get DataExecutionPrevention_SupportPolicyThe value returned will be 0, 1, 2 or 3. This value corresponds to one of the DEP support policies that are described in the following table.
DataExecutionPrevention_SupportPolicy property valuePolicy LevelDescription2OptIn (default configuration)Only Windows system components and services have DEP applied3OptOutDEP is enabled for all processes. Administrators can manually create a list of specific applications which do not have DEP applied1AlwaysOnDEP is enabled for all processes0AlwaysOffDEP is not enabled for any processesNote To verify that Windows is running with hardware DEP enabled, examine the DataExecutionPrevention_Driversproperty of the Win32_OperatingSystem class. In some system configurations, hardware DEP may be disabled by using the /nopae or /execute switches in the Boot.ini file. To examine this property, type the following command at a command prompt:wmic OS Get DataExecutionPrevention_DriversMethod 2: Use the graphical user interfaceTo use the graphical user interface to determine whether DEP is available, follow these steps:
  1. Click Start, click Run, type wbemtest in the Open box, and then click OK.
  2. In the Windows Management Instrumentation Tester dialog box, click Connect.
  3. In the box at the top of the Connect dialog box, type root\cimv2, and then click Connect.
  4. Click Enum Instances.
  5. In the Class Info dialog box, type Win32_OperatingSystem in the Enter superclass name box, and then click OK.
  6. In the Query Result dialog box, double-click the top item.

    Note This item starts with "Win32_OperatingSystem.Name=Microsoft..."
  7. In the Object editor dialog box, locate the DataExecutionPrevention_Available property in the Properties area.
  8. Double-click DataExecutionPrevention_Available.
  9. In the Property Editor dialog box, note the value in the Value box.
If the value is TRUE, hardware DEP is available.Notes
  • To determine the mode in which DEP is running, examine the DataExecutionPrevention_SupportPolicy property of the Win32_OperatingSystem class. The table at the end of Method 1 describes each support policy value.
  • To verify that hardware DEP is enabled in Windows, examine the DataExecutionPrevention_Drivers property of the Win32_OperatingSystem class. In some system configurations, hardware DEP may be disabled by using the/nopae or /execute switches in the Boot.ini file.

Oct 11, 2012 | Google Chrome

1 Answer

Data execution prevention as I am getting this messaGE WHENEVER i GO TO OTHER WEBLINK AND iNTERNET eXPLORER SHUTS OF SO i NEED YOUR HELP


There is two area's that DEP is held One in the perfomance section and the other in IE Firstly we'll fix IE DEP 1. Open up IE and quickly select Tools 2. Select the advanced tab 3. Uncheck the Enable memory protection 4. Restart IE to apply. 1. Start\Control Panel\System and Maintenance\Performance Information and Tools\Adjust visual effect 2. Select the Data execution prevention tab 3. Check the Enable DEP for Essential windows programs and services 4. Restart the computer to apply.Disable DEP using CMD A) In the command prompt, type bcdedit.exe set {current} nx AlwaysOff and press Enter.B You should get a success message back C Close the command prompt. D Restart the computer to apply. Enable DEP using CMD A In the command prompt, type bcdedit.exe /set {current} nx OptIn and press Enter. B You should get a success message back C Close the command prompt. D Restart the computer to apply.
If a program is being closed by DEP, then make sure that it is a DEP compatible version and check for an updated version. If it is not DEP compatible, then you can uninstall the program or turn off DEP for that particular program.Follow the steps below to to close Data execution prevention a. Click on start. b.Right click on Computer and click Properties.c. Click on Advanced system settings.in upper left green area d.Click on the Continue button in the UAC prompt.e Click on the Settings button under Performance section.f Click on the Data Execution Prevention tab. g. Turn DEP On for Essential Windows Vista Programs and Services Only.NOTE: This turns on DEP for only the 32 bit system programs and services. This is the default setting. h.Click on Turn on DEP for essential Windows programs and services only.click on OK to apply. j.Turn DEP On for All Programs and Services Except for the Ones you Select.NOTE: This turns on DEP for every 32 bit program except for the ones that you add to the list. The listed program will have DEP turned off for it.Turn on DEP for all programs and services except those I select. Click Add to add the programs that you do not want to use the DEP feature. m. Navigate to the program's .exe file that you want to add to the DEP exclusion list and select it, then click on Open. n.Click on OK to apply. b. Restart the computer to apply changes.

Oct 24, 2011 | HP Pavilion DV6000T 15.4­ NOTEBOOK LAPTOP...

1 Answer

DEP as IE shuts of


There is two area's that DEP is held One in the perfomance section and the other in IE Firstly we'll fix IE DEP 1. Open up IE and quickly select Tools 2. Select the advanced tab 3. Uncheck the Enable memory protection 4. Restart IE to apply.

1. Start Control Panel System and Maintenance Performance Information and Tools Adjust visual effect 2. Select the Data execution prevention tab 3. Check the Enable DEP for Essential windows programs and services 4. Restart the computer to apply.

Alternatively

Disable DEP using CMD

A) In the command prompt, type bcdedit.exe /set {current} nx AlwaysOff and press Enter.
B) You should get a success message back
C) Close the command prompt.
D) Restart the computer to apply.

2000969800579650207_rs.jpg



Enable DEP using CMD

A) In the command prompt, type bcdedit.exe /set {current} nx OptIn and press Enter.
B) You should get a success message back
C) Close the command prompt.
D) Restart the computer to apply.

Regards

Oct 24, 2011 | Microsoft Windows? Vista Home Premium...

2 Answers

How to enable or disable programs onDEP


To enable or disable Data Execution Prevention (DEP)

In windows XP,
  • Log in as administrator
  • Open the Start menu, right-click on My Computer and Choose "Properties" from the context menu.
  • On the "System Properties" window, click the "Advanced" tab .
  • click settings button under Performance
  • click the "Data Execution Prevention" tab
  • choose either "Turn on DEP for all programs and services except those I select:" or "Turn on DEP for essential Windows programs and services only to select the OptIn policy"
  • If you choose "Turn on DEP for all programs and services except those I select:", click Add to add the programs that you do not want to use the DEP feature.
  • Click OK twice
  • Restart the computer for the changes to take effect
I hope that you find this information helpful.

Mar 03, 2011 | Microsoft Windows XP Professional for PC

1 Answer

Window Vista problem??


If you receive this error message or encounter difficulties when attempting to launch Pro Tools using Windows Vista disabling DEP may solve the problem.

This option disables "Data Execution Prevention", a feature of Windows that can sometimes cause errors. This won’t harm anything, but also isn’t always necessary.

How to Disable DEP:

1. Click "Start"
2. Click "All Programs"
3. Click "Accessories"
4. Right Click on "Command Prompt"
5. Left click on "Run as Administrator"
6. Click the Allow button if it asks you for permission
7. Type or copy and paste this into the command prompt window:

bcdedit.exe /set {current} nx AlwaysOff


8. Hit enter and you should see the confirmation: Operation Completed Successfully
9. Reboot and DEP should be off.

If you would like to re-enable DEP enter the following into the command prompt window:
bcdedit.exe /set {current} nx AlwaysOn

Hit enter and you should see the confirmation: Operation Completed Successfully. After restarting the computer, DEP will be re-enabled.

Nov 04, 2009 | Microsoft Windows Vista Home Premium with...

3 Answers

Internet Explorere keeps closing down


Data Execution Prevention (DEP) is a security feature that helps prevent damage from viruses and other security threats by monitoring your programs to make sure they use system memory safely.

Here is a link to an excellent article on DEP.
Whie it will show you how to turn DEP on, it will also take you to the control panel that will aloow you to adjust your settings.

http://windowshelp.microsoft.com/Windows/en-US/help/1d9bb9b4-f6ba-466d-ac2b-7b8c4f8361611033.mspx

Oct 03, 2009 | Computers & Internet

1 Answer

Why do i keep getting DEP error message each time i close IE8 or a tab? when i close a tab ie8 reloads it because of dep problems can i go back t ie7 and will this stop the reloads i now have to go to...


You can disable DEP by following these steps:

Disable Data Execution Prevention (DEP) completely
  1. Click Start, and then click Control Panel.
  2. Under Pick a category, click Performance and Maintenance.
  3. Under or Pick a Control Panel icon, click System.
  4. Click the Advanced tab, and in the Startup and Recovery area, click Settings.
  5. In the SystemStartup area, click Edit.
  6. In Notepad, click Edit and then click Find.
  7. In the Find what field, type /noexecute and then click Find Next.
  8. In the Find dialog box click Cancel.
  9. Replace the policy_level (for example, "OptIn" default) with "AlwaysOff" (without the quotes).

    WARNING: Be sure to enter the text carefully. Your boot.ini file switch should now read:

    /noexecute=AlwaysOff
  10. In Notepad, click File and then click Save.
  11. Click OK to close Startup and Recovery.
  12. Click OK to close System Properties and then restart your computer.
This setting does not provide any DEP coverage for any part of the system, regardless of hardware DEP support.
Verifying DEP is Disabled
  1. Click Start, and then click Control Panel.
  2. Under Pick a category, click Performance and Maintenance.
  3. Under or Pick a Control Panel icon, click System.
  4. Click the Advanced tab.
  5. In the Performance area, click Settings and then click Data Execution Prevention.
  6. Verify that the DEP settings are unavailable and then click OK to close Performance Settings.
  7. Click OK to close System Properties then close Performance and Maintenance.
Thank you!
Sabharish

Jun 03, 2009 | Microsoft Internet Explorer 8

2 Answers

Why do i keep getting DEP error message each time i close IE8 or a tab?


windows xp has DEP ( data execution prevention ) some viruses etc use that sort of technique and from SP2 onwards I believe it was they included it.

http://www.zensoftware.co.uk/kb/article.aspx?id=10002


Several OSs have no-execute or execute protection. Microsoft has added this as well in SP2 with data execution prevention (DEP). This precents code execution in memory regions already marked as storage. This is a powerful tool against buffer overrun exploits. If a program is failing and you want to disable DEP to see if that is the cause. Here are the steps. (Just disable DEP for the program in question… don’t disable it for your whole system.)
    1. Click Start
    2. Select Control Panel
    3. Select System
    4. Click the Advanced tab
    5. In the Performance region select Settings
    6. Click the Data Execute tab in the dialog box that opens
    7. Select Turn on DEP for all programs and services except for those I select
    8. Click Add.
    9. The open dialog box will open. Browse and select your application.
    10. Click Open
    11. Click Apply
    12. Click Ok
    13. Reboot


May 10, 2009 | Microsoft Internet Explorer 8

1 Answer

Gigaware controller on vista


Hi,
You don't (and can't) disable DEP for the controller (a gamepad controller isn't an application, it's a device which uses a driver, Data Execution Protection applies to applications ie .exe files), it's the game or emulator you disable DEP for, so that you the game can run, completely free of security bindings, and then you would be able to go into the game configuration menu and select your gamepad, and calibrate it. Calibrating means the game detects you gamepad and applies the specific functions to each button.
One way to be sure is to disable DEP for everything, then install a game, and THEN plug in your gamepad. Then start the game/emulator and go to the configuration menu within the game/emulator and set up the gamepad calibration in there.
If it doesn't work, then you haven't installed the drivers for the gamepad properly, or haven't installed the correct driver.

Before doing any of that, you would have checked in Control Panel and Gamepad Controllers, double clicked the Gamepad in the list and pressed Calibrate, to enable generic gamepad functionality.
If you hadn't done that, do so now.
If it still doesn't work, then NOW disable the DEP (either all DEP or for the game/emulator you want to play). Unplug the Gamepad and load up a game. Then plug the game pad in. Set up the gamepad from within the game/emulator config menu, which differs from game to game, of course, but is more or less the same.
If it doesn't work.. re-install the correct driver for the gamepad.
Also make sure your operating system is fully updated and you're plugging the gamepad into a usb2.0 port. and have rebooted after installing the gamepad usb driver.
That's everything you need to know..
Good Luck!

Chris (ziraffa)

Dec 27, 2008 | Video Game Consoles & Games

1 Answer

My laptop is acting up due to DEP


If a program is failing and you want to disable DEP to see if that is the cause. Here are the steps. (Just disable DEP for the program in question… don’t disable it for your whole system.)
    1. Click Start
    2. Select Control Panel
    3. Select System
    4. Click the Advanced tab
    5. In the Performance region select Settings
    6. Click the Data Execute tab in the dialog box that opens
    7. Select Turn on DEP for all programs and services except for those I select
    8. Click Add.
    9. The open dialog box will open. Browse and select your application.
    10. Click Open
    11. Click Apply
    12. Click Ok
    13. Reboot
    Please rate this a Fixya

Dec 19, 2008 | Microsoft HP Pavilion DV6276US Notebook PC

Not finding what you are looking for?
ASUS T2 P4P8T WO/CD/MDM FM AGP8X GETH WIFI (t2-p) Logo

Related Topics:

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Televison & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you an ASUS Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...