- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Regarding Blue tint of Photos and Videos - This is tied directly to your White Balance Settings. When you White Balance is set to Auto, the Camera determines the best setting to use to for White Balance (How much Blue or Orange needs to be added for best White). To get a Blue Tint, the Camera's White Balance is most likely set manually to something like Incandescent or Indoor. First you will want to see that your White Balance is set to Auto - If it was not, then Auto should fix your problem. But If it is alrready on Auto, and you are still getting Blue tint both Indoor and Outdoor, then the Camera's Software may be faulty.
Hope this helps!
Your camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras have any user-serviceable parts. Please rate our solutions and if you still have problems please call back for more ideas to help you
Thanks Richard Scott Technical Support New Zealand
Hi, It is problem of bad CCDImager in DSC-T1 and that part would be replaced for correct live view to take picture. Sony would repair DSC-T1 in bad CCDImager problem for Free of Cost. Please click Sony CCDImager Support for details. If you are in different country, let me know to guide you.
Check your picture settings, the wrong setting for the time of day or object can definetly throw off the appearance of your pictures. Plus, you may have accidentally set it to "warm" instead of auto or black and white, etc. Warm pictures have a reddish tint to them just as the cool have a blue tint. Also I have found the "night setting" only takes really good pictures if you are close to the subject otherwise it is pretty dark!
This could be a native color cast of the sensor. Is there an option to set tint levels in camera? If so, simply push the slider over to the 'green' end until it looks right.
This can also be done with basic photo editing software.
If this is an issue you need solved from the hardware end, Nikon is your friend. It's at least worth the 10 dollars to send it back to factory to find out if there's something wrong with it. Check out NikonUSA.com for a list of authorized service centers near you.
This sounds like a budding CCD problem that Canon is aware of. Canon is replacing the defective CCD at no charge. Go here for the link and more details on getting a free mailing label: http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=223&modelid=8044&keycode=2112&id=29819