Question about Toshiba e-Studio 161 Copier Copier

1 Answer

E studio 161 ink indicator

I want to see how much ink i have in my toshiba e studio 161 but i don't know how to do that. or is there a way to see how much copies have been printed with this kartridge, to see how many have remained?

thank you
Elsi

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toshiba Master
  • 990 Answers

Dear sir; First I have let you know the copier use toner not ink , want to know how many left over; 1, press and hold down the left exposure key until indicator flash, then press and hold the "%" key for 5 seconds.the window will show out the percentage. LO means less than 10%, press left exposure key to escape.if there still have problem please let me know, otherwise please be generously give me rating. thank you. HAVE A MERRY CHRISTMAS !!!

Posted on Dec 24, 2008

  • Everett Lin Dec 25, 2008

    Hi ! sir; This is a reminder, you forgot give me a rate.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In toshiba 161 photocopier f5 error indicats


http://www.copytechnet.com/forums/toshiba/79285-e-studio-161-f5-02-error-code.html

Mar 12, 2016 | Toshiba e-Studio 161 Copier Copier

1 Answer

I want to know how i download Toshiba e studio 161 driver to 32bit windows7


If a driver has been written for your printer for you operating system it will be found here. If not , you may be out of luck as drivers are only written by the printer/copier company


www.toshibamea.com/en/Download-Files

Dec 25, 2014 | Toshiba e-Studio 161 Copier Copier

1 Answer

E studio 161 does not work with windows 7 please help I have driver of windows xp


Hi,
Toshiba e-studio 161 drivers are available Toshiba Official Support
Click 'Support & Drivers' (Top Right Corner)
From the page that appear Choose B/W Copiers
then Choose e-Studio 161
Select the drivers and download for your Operating System (i.e. Windows 7)
Also, Below is the direct download link for Windows 7 Drivers
E-studio Drivers for Windows7 (32Bit)

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Jun 28, 2011 | Toshiba e-Studio 161 Copier Copier

2 Answers

Toshiba e-studio 161 developer low functions reset code


Sir, i added new toner and new developer but my printout is dull. What i do?

Nov 18, 2010 | Toshiba e-Studio 161 Copier Copier

3 Answers

TOSHIBA E-STUDIO 161 error code show mw H and 4


Hi,
How are you this is jack my id jack_pak@hotmail.com
your copier toshiba 161 show H...4

Dear, Follow the procedure.... press C(CLEAR) BUTON+ PHOTO BUTON+C BUTON+PHOTO BUTON..... Your copier enter special mode
Then you press 14 and start key.... copier ...ok
PLEASE VOTE ME
Thanks,
Best Regards,

Aug 31, 2010 | Toshiba e-Studio 161 Copier Copier

2 Answers

I have L6 on toshiba e studio 161


L6 indicates Polygon motor lock detection where it does not rotate.
U can use SIM 61-1 to check the polygon motor operation or not, and the connector/wire harness. If confirm the polygon motor not working, then u need to replace it.

Sep 25, 2009 | Toshiba e-Studio 161 Copier Copier

1 Answer

Drivers for TOSHIBA e-studio 161 MFP for VISTA 64 Bit O.S.


What kind of interface u're using ? USB cable or network cable?
if USB cable, currently only support until Vista 32bits.
But if running networking, Vista 64bits is supported.

Mar 31, 2009 | Toshiba e-Studio 161 Copier Copier

1 Answer

Can't print or copy with my toshiba e studio 161


H2 indicates thermistor open.

U can enter simulation mode and input "14" to clear the message.

If happen again, u need to check following:
Thermistor
Control PWB
Fusing section connector disconnection
The fusing unit is not installed.

Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.)


Jan 15, 2009 | Toshiba e-Studio 161 Copier Copier

1 Answer

Toshiba e studio 161


already paper jam in feeding assembly so please check any paper jam.or lubricate all drive gears

Jul 08, 2008 | Toshiba e-Studio 161 Copier Copier

Not finding what you are looking for?
Toshiba e-Studio 161 Copier Copier Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...