Question about Logitech QuickCam Chat Personal Web Camera

1 Answer

Can't install a logitec quickcam E 2500 on my mac

The cd rom won't open to allow the program to install. I don't have a "my computer" icon to double click on and in the 2nd alternative there is no "Autoplay" when I open the CD-Rom drive icon. Adobe Reader 7.0.5 won't open the icons either.  It keeps telling me it is not supported by this program.   My Mac is a G5 OSX and I'm running 10.4.11 Thanks for any help I can get. Keith

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Logitech Master
  • 5,263 Answers

The Quick Cam line ever had drivers for Mac OS versions. See the specifications here: http://support.logitech.com/en_us/product/quickcam-connect-product/specs . The E2500 works with Windows XP and Vista. You may be able to use the camera in Boot Camp running one of these versions of Windows. The Quick Cam E2500 doesn't work with Windows 7 and newer Windows OS versions.

The Logitech Webcams, including the C525 and the C920, will work with a Mac directly.

I wish that I had better news for you.

Cindy Wells

Posted on Aug 16, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Logitech Quickcam install on a Mac OS X or mac laptop

i dont know if this will help, i coulndt get my quickcam to work (didnt seem to even recognize it was plugged in ) but i got this and it works now , just follow the readme file it will tell u where to put the patch to make it work, :)

http://webcam-osx.sourceforge.net/

Posted on Feb 26, 2008

SOURCE: Logitech Quickcam install on a Mac OS X or mac laptop

download "macam." It give mac support for a LOT of non-mac webcams.


Posted on Oct 23, 2008

yooperbud
  • 8637 Answers

SOURCE: logitec quickcam notebook pro visa OS

Normal 0 Go to this site
http://www.logitech.com/index.cfm/support_downloads/&cl=us,en
Then
Search by Image
or
Search by Name
and
Product Name.
This will then take you to the next window where you need to select your
Operating System. Then you will get your download driver.
Hope this helps. Bud

Posted on Feb 23, 2009

yooperbud
  • 8637 Answers

SOURCE: logitec quickcam express

Normal 0 Double Click on this site
http://www.free-codecs.com/AMCap_download.htm
to download the Free AMCAP Video Capture Program.
AMCap v9.20 AMCap is a small yet fully functional video capture application compatible with Microsoft DirectShow. It is based on the sample AMCap from the Microsoft DirectX 9 SDK. AMCap supports still captures to BMP, JPEG and PNG formats and it remembers your Video Input, Video Standard and Video size settings from previous session. It has some nice features like multimonitoring support, zooming, aspect ratio and deinterlacing features.

AMCap is a small and effictive piece of software and definitely worth trying. Hope this will help. Bud

Posted on Apr 24, 2009

  • 2 Answers

SOURCE: Logitech Quickcam install on a Mac OS X or mac laptop

Is there a way to get this web camera working on XP SP1? I just need drivers, no camera management software or anything. Best regards. M/N: V-UCV39 P/N: 860-000114 PID: LZ823BR

Posted on Jun 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG Web Camera LIC-300


The QuickCam Connect is a brand of Web camera manufactured by Logitech. It is among the lowest-priced in the Logitech line of cameras, and it was developed to work exclusively with the Windows operating system. As a result, the Logitech Web site does not offer software that allows users to connect the webcam to a Macintosh computer. However, third-party software is available at no charge to enable you to use a QuickCam Connect with your Mac.

Plug your QuickCam Connect into an available USB port on the Macintosh. Navigate to the Macam download site, which is hyperlinked on the site or is available below. http://sourceforge.net/projects/webcam-osx/files/macam/0.9.2/macam.0.9.2.dmg/download Note: When you arrive at this download site, the application will immediately begin downloading onto your Macintosh. After the software has downloaded to your computer, it will automatically decompress and a disk drive icon will appear on your desktop. A dialog window will open in the Finder. The Macam application is pictured within the dialog window, and should be highlighted, then dragged to your applications folder. From the "Applications" folder, double-click on the Macam icon and open the program. Navigate back to the Macam dialog window that opened on your desktop after the application was downloaded from the Internet. Highlight and drag the "macam.component" to the "/Library/QuickTime/" folder. Use a simple video viewer to verify that the component is installed correctly. QuickCam Connect and iChat IChat is a popular instant messaging application that comes with the Macintosh OS. The software download that allows you to use a QuickCam Connect with your Mac needs another piece of software to be compatible with iChat. Unfortunately, this compatibility is not free. Navitage to Ecamm Network (see Below) and locate iUSBCam, a software application that will make iChat compatible with QuickCam Connect. http://www.ecamm.com/mac/iusbcam/ IUSBCam costs $9.95 as of January 2010. After purchasing the software, download and follow the installation steps that accompany the application. Help with installation and applications. http://sourceforge.net/projects/webcam-osx/forums/forum/145156

Feb 08, 2013 | Computers & Internet

2 Answers

COMPUTER CRASHED I NEED TO RELOAD CD BUT I DONT HAVE ACCESS CODE


There are now several versions of the basic Futura software and AutoPunch available on the market. The most current is version 1.0.0.2. To determine what version of either software you have, you will find this information around the inside rim of the CD at approximately 4 o'clock. Before loading any of the Options into your computer, check the version and then follow the steps below. The following steps will update your software so that you will now have the latest 1.0.0.2 version of the basic program and all options.

To load base software 1.0.0.0 with AutoPunch 1.0.0.0 or base software 1.0.0.1 with Autopunch 1.0.0.1

  • You must use bobbin part number 085128. This bobbin is specifically designed for the Futura CE-100 and CE-200.
  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off the machine
  • Install Autopunch and leave the CD in the tray
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 with AutoPunch 1.0.0.1 or base software 1.0.0.1 with Autopunch 1.0.0.0

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off the machine
  • Install Autopunch and leave the CD in the tray
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 or 1.0.0.1 with Autopunch 1.0.0.2

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close software and turn off machine
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Install Autopunch using Installation Wizard - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.2 with Autopunch 1.0.0.0 or 1.0.0.1

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off machine
  • Place Autopunch CD in tray but CANCEL Installation Wizard
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura Machine and double left click to open the program
  • Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.1 with Autopunch 1.0.0.1 with Hyperfont 1.0.0.2 or Photo Stitch 1.0.0.2

  • Load Base software (have the machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off the machine
  • Install the Autopunch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program*
  • Close program and then turn off the machine
  • Download appropriate update for Windows version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off the machine
  • Install HyperFont program - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from HyperFont jewel case and then left click on check mark to open program*
  • Close program and then turn off the machine
  • Install PhotoStitch program - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from PhotoStitch jewel case and then left click on check mark to open program*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

To load base software 1.0.0.2 and adding all Options - Hyperfont 1.0.0.2, PhotoStitch 1.0.0.2, Autopunch 1.0.0.2 and Cross Stitch 1.0.0.1

  • Install Base software (have machine set-up for embroidery with USB connected to both the machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off machine
  • Install Autopunch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from AutoPunch jewel case and then left click on check mark*
  • Close program and turn off machine
  • Install Hyperfont program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from HyperFont jewel case and then click on check mark*
  • Close Program and turn off machine
  • Install Photo Stitch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from PhotoStitch jewel case and then left click on check mark*
  • Close program and turn off machine.
  • Install Auto Cross Stitch program and leave CD in tray
  • Download appropriate update for Windows version from the Futura-Support.com updates (Fut_sp2_Options.exe) and save to desktop
  • Double left click on the desktop download icon to install
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from Auto Cross Stitch jewel case and then left click on check mark*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

Dec 11, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Trouble installing my Samsung SCX-4200 printer


Good day Sir, That is common macintosh problem. There is described "driver not installed" at product List Window after you click Add and select USB. I suggest Reintall the software and make sure that you are using a high-quality cable.

Installing software Samsung scx-4200 for Macintosh
Verify the following before you install the software.
Operating System - Mac OS 10.3x or higher
RAM - 128 MB
Free Disk Space - 200MB
  1. Make sure that you connect your printer to the computer. Turn on your computer and printer.
  2. Insert the CD-ROM which came with your printer into the CD-ROM drive.
  3. Double-click CD-ROM icon that appears on your Macintosh desktop.
  4. Double-click the Mac_Installer folder.
  5. Double-click the Mac_printer folder.
  6. Double-click the Samsung SPL2 Installer icon.
  7. Enter the password and click OK.
  8. The Samsung SPL Installer window opens. Click Continue and then click Continue.
  9. Select Easy Install and click Install.
  10. After the installation is finished, click Quit.
Have a nice Day.

Dec 24, 2009 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

Canoscan Lide 20/lide30 Ver. 1.02 Will not load in my Mac 10.4.11 Tiger.Had it in my previous vergin mac 10.2 but since I've upgraded scanner tells me I've got error .06 and will not reload. I assume I...


http://www.usa.canon.com/consumer/controller;topic=609.msg7369?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=104&modelid=6624#DownloadDetailAct




Mac OS X (Native Mode)
  1. Turn the computer on. Log in as the first created administrator account to install the software. You cannot install the software when logged in using added administrator accounts.
  2. Place the CanoScan Setup Utility CD-ROM in the drive.
  3. Double-click the CD-ROM icon.
  4. Double-click the MacOS X folder/icon.
  5. Note: Some versions of the CanoScan Setup CD-ROM will not include the Mac OS X version of Toolbox. If this is the case, you should download and install Toolbox from Canon's website. www.canontechsupport.com
    If you will not be installing Toolbox at this time, skip to step 7.

    Double-click the CanoScan Toolbox folder/icon.
  6. Double-click the CanoScan Toolbox Installer icon. Follow the on-screen prompts to complete the installation.
  7. Once the installation of Toolbox is complete, you should then access the ScanGear CS folder also located in the MacOS X folder.
  8. From the ScanGear CS folder, click the ScanGear CS Installer icon. The installer will search for available install locations for the scanner plug-in driver. Follow the on-screen message prompts to complete the installation.

Jun 18, 2009 | Computers & Internet

2 Answers

Logitech Quickcam install on a Mac OS X or mac laptop


Is there a way to get this web camera working on XP SP1? I just need drivers, no camera management software or anything. Best regards. M/N: V-UCV39 P/N: 860-000114 PID: LZ823BR

Feb 01, 2009 | Logitech QuickCam Connect Webcam

1 Answer

Forgot pin number for epson stylus cx6400


If you forget your PIN code, you can regain access to the CX6400 by running the security lock program from your computer:
1.
Insert your Stylus CX6400 software CD-ROM.
2. Windows: If you see the Software Installation screen, click Exit.
Open the
SecurityLock Tool folder on your CD-ROM, then double-click the program file located in that folder.

Macintosh: The EPSON folder automatically opens (if it doesn’t, double-
click the EPSON CD-ROM icon). Then double-click the Security Lock icon.

Nov 24, 2008 | Epson Stylus CX6400 All-In-One InkJet...

2 Answers

I am trying to install a Linksys router WRT54G. I have E-machine model W4885 I put the disk in and nothing appears on the screen. What do I need to do?


Open windows explorer.(START-PROGRAMS-ACCESSORIES-WINDOWS EXPLORER)
click the +, by my computer, click once on the cd rom, find the setup or autorun file in the right hand pane and double click it and the cd should start.


srich

Mar 13, 2008 | Computers & Internet

1 Answer

Quickcam


Error 2711
When receiving the 2711 error during Logitech QuickCam/Image Studio software installation, please perform the following steps:
  1. Use Add/Remove programs in the Control Panel to uninstall any current installation of QuickCam/ImageStudio software. For Microsoft Windows 95, 98, ME or NT
    1. Click Start, Settings, then Control Panel.
    2. Double click the icon labeled Add/Remove Programs.
    3. Highlight the desired program in the list provided (QuickCam or ImageStudio).
    4. Click Add/Remove Programs located in the bottom right of the list provided.
    For Microsoft Windows 2000 or XP
    1. Click Start. followed by Control Panel.
    2. Double click the icon labeled Add/Remove Programs.
    3. Highlight the desired program in the list provided (QuickCam or ImageStudio).
    4. Click the button labeled Remove located in the bottom right of the program selected.
  2. Navigate to C:\Program Files\Logitech.
    1. Double click the icon on the desktop labeled My Computer.
    2. Double click the icon labeled C:\(computer name).
    3. Double click the yellow folder labeled Program Files.
    4. Double click the yellow folder labeled Logitech.
  3. Delete any folders for QuickCam/ImageStudio.
    1. Select the yellow folder with the QuickCam or ImageStudio names.
    2. Click the menu options for File, followed by Delete.
    3. Repeat for any other QuickCam/ImageStudio folders.
  4. Delete all files located in the Windows temporary directory C:\Windows\Temp or C:\WinNT\Temp
    1. Double click the icon on the desktop labeled My Computer.
    2. Double click the icon labeled C:\(computer name).
    3. Double click the yellow folder labeled Windows or WinNT.
    4. Double click the yellow folder labeled Temp.
    5. On the menu across the top of the window, click Edit followed by Select All.
    6. On the menu across the top of the window, click File followed by Delete.
    7. Click OK.
  5. Reinstall QuickCam/ImageStudio
    1. Remove and reinsert the QuickCam/ImageStudio CD and follow the prompts OR
    2. Double click on the downloaded ImagStudio file.

Dec 27, 2007 | Logitech QuickCam Express Web Camera

Not finding what you are looking for?
Logitech QuickCam Chat Personal Web Camera Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2932 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18413 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...