- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Rotate the Live View switch to the LV position. Focus by pressing the shutter release button halfway. Start recording by pressing the movie-record button. Stop recording by pressing the movie-record button again.
Full details are in the "Recording and Viewing Movies" section of the manual (page 107 in my copy). If you need a manual, you may download a copy here.
If you can watch the videos on the TV, your cables are correct, but you don't generally record a video to DVD using the record button. Most VCR/DVD combinations have a DUBBING button on the front of the player and/or the remote control for copying from one to the other.
Additionally, some players can only record from video to DVD, some can only record from DVD to video and others will do both. On players that can do both, you need to instruct the player whether you want to record from video to DVD or vice-versa.
If you can le me know the model number of the player, I can let you know which recording options are available on your player, how to record and (hopefully) supply a new manual which you can download and print. The model number may be on the front of the player, but usually these are found on a label on the back of the player.
To program the recording by time and channel, press Prog then press Start +/- (the left-most +/- button below the number pads). You should see the time and channel blanks. Continue pressing the Start +/- button until you get to the desired start time. If you press and hold the Start +/- button, the time will advance by 30 minutes. To set the Stop time, press the next button to the right (the Stop +/- button) until you reach the desired end time. Use the next toggle button (to the right) to set the Date for the recording. Use the Channel +/- button (the right-most button in the row) to set the channel to record. Set the tape speed with the SP/EP button below the Date toggle. Then press Prog or OK to save the recording. This is in the manual under Express Timer Recording which starts on page 42 of the manual. I found the manual here: http://resources.jvc.com/Resources/00/00/99/LPT0024-001B.pdf .
The button with the red circle and a small line through it is the on/off button. The button underneath it with the garbage can is the delete button, the red button in the middle is the record button, and the four buttons around it are the direction keys, and the button with the triangle/square is the play/stop button, so when you're reviewing clips, you can stop and start them.
For the user's manual, pls try here. On your post "...video broke..." I understand that there are three (3) possible way to connect the video: composite, component, and S-video. Have you tried them all?
Hope that this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
Your VCR has input to record video-audio signal. Here is 2 options to record program in vcr.
1= You need to hook up video-audio cable at Monitor Out in TV and video-audio in at VCR. select Line-1 or Line-2 (where you hook up cable) in vcr and insert cassette with Record Tab intact, VCR is ready to record TV program. select desired channel on tv and hit record button of vcr, recording will start.
2= Plug RF antenna / cable wire in RF In of vcr and tune desired channel in vcr (get help of vcr's user manual for that) and push record button to start record directly in vcr.
Have further query, let me know please.
Found my manual! To set the time, press and hold the time/code button for 2 seconds. You will hear "TO SET CODE PRESS TIME AND CODE BUTTON." Release the time/code button. Press the 2 way/m button once. You will hear "SET DAY AND TIME, SUNDAY" Press the << or >> button until you hear the correct day. Press the time/code button once. You will hear "TWELVE" Press the << or >> button until you hear the correct hour. Press the time/code button once. You will hear "OH". Press the << or >> button until you hear the correct minutes. Press the time/code button once. You will hear "PM". Press the << or >> button if you need to change to AM. Press the time/code button once and you will hear the complete time and day setting.
To record an outgoing message, press and hold the ogm button. Release the ogm button and start to record after you hear "PLEASE RECORD AFTER THE TONE" followed by a beep tone. When finished, press the ogm button.
Make sure you put a battery in the answering machine so you don't lose these settings if the power goes out!