Question about HP LaserJet 4600dn Color Printer

1 Answer

Hp colour laserjet 4600dn, 51.2Y error...how to solve that?

Cannot print...51.2Y error massage

Posted by on

  • Optima Jan 23, 2009

    Bijay: Hi, I have a problem in HP colour laserjet 4600hdn Printer Error 51.2Y .......... can u help

  • Anonymous Feb 10, 2009

    I have the same error and purchased another yellow cartridge and I am getting the same error. When I took out the yellow cartridge it did recgonize that the yellow cartridge was gone. What should I do

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

From Woody Friesen:
Did the printer have a rough ride? HP's service manual suggests this to be a laser error on the yellow laser scanner, though these printers usually withstand shipping without any problems. Just for grins, if you can get the printer to get to READY again, run the printer through a complete calibration (from the control panel: Configure Device/Print Quality/Calibrate Now). The DC controller circuit board is also a possibility, but given the error code popped up almost as soon as you plugged the machine in suggests the yellow scanner has suffered some sort of mechanical damage from the trip. If the calibrate routine doesn't remedy the problem and you want to be sure, you could do the major disassembly required and swap the yellow scanner with the scanner for another color in the printer and if the error code changes to 51.2M (magenta), 51.2C (cyan) or 51.2K (black) (the code will reflect which scanner you exchanged with the one in the yellow position) you'll have confirmed the scanner is the problem, or if no change, then the DC controller is next in the chain.

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We use hp T770 HDD, error massage 79.03 when loading, after show preparing print system massage in a few minutes. ask for restart but after restarted the problem persist. please kindly help us if there any...


79 errors are often linked to firmware. Unplug the printer from power as well as any network or USB cables you may have plugged in. If the printer will restart without an interface cable connected then it is likely a bad print job. Clear all jobs from the print queues and then plug in the interface cable. If printer continues to stay at ready, download the current firmware and install it. This should resolve the problem.

May 25, 2011 | HP DesignJet Z2100 InkJet Photo Printer

1 Answer

I am getting scanner error 5 massage on hp 2840


A tech needs to look at it. It could be as easy as just reseating the 4 wire bundle connector that comes off the scanner and connects to the formatter.
But, in any event a tech has to check it out.

Jul 29, 2010 | HP LaserJet 2840 Printer

1 Answer

Print spooler stop


In run window type services.msc and the go to print spooler option just stop and restart the service.
Hope this helps. Please rate my response.
Thanks.
Have a good day.

Mar 15, 2010 | Printers & Copiers

1 Answer

JAMSHED MY PRINTER GIVE THE MASSAGE LSU ERROR


i am not able to print as this model printer is not in system

Dec 03, 2009 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

Print error


print off as config page, then ping the machine in msdos to see if you can communicate.
ask if you need instuctions

Jun 27, 2009 | Konica Minolta bizhub C250 All-In-One...

3 Answers

Eror E677


roblem : 
The machine displays an E674 code. This may be followed by an E677 code when the Fax pcb is removed. The imageRunner also has a Print Board installed. 

Solution : 

With the Fax Board and Print Board installed an E674 code occurred. When the Fax Board was removed an E677 code then occurred. 
Try removing the PDL Interface pcb for the Print Board from the copier. Reinstall the Fax Board, if the E674 code does not occur and the copier is capable of sending and receiving faxes, then replace the PDL Interface pcb because it may be faulty and causing the two E codes; E674 for faxing and E677 for printing.

Jun 01, 2009 | Canon imageRUNNER 400S Copier

1 Answer

CANON iX500 error 5C10


5C10 error message. cancel the print job and turn printer off. for 5min by unplugging it from all source of power supply this will occasionally rectify the problem, hope this helps pls do let me know

Mar 31, 2009 | Canon Pixma iX5000 InkJet Plotter Printer

2 Answers

CANON IR 400 COPIER - ERROR - E677


677 error is printer board error.u check conection( lpt port or usb cable loose conection.printer board loose conection.remove all conection and conect all conection i mean reinsert conection ) then this error come u will service u r printer board(re insolve printer softwere).803 error is expouser lamp end side blocked change u r lamp u r 803 problem is ok

Sep 11, 2008 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
HP LaserJet 4600dn Color Printer Logo

5,487 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...