Question about NetGear WG111 802.11g/b Wireless Adapter

2 Answers

Hp laptop dv6000 series won't recognise netgear wg111v2 wireless adaptor

I am having a problem connecting to the Internet through my netgear wireless adaptor. i have spoken to my ISP tech support and they advised that it was something to do with my HP laptop. I have a toshiba laptop as well that connected fine and I can access the internet through that. However my HP laptop is more powerful and I want to connect to online games. There is a default wireless network connection in control panel. When I type in the key (26 characters)via my ISP's connection disc for additional computers, it gets so far then brings up an error referring me to a security document on able to logon to the internet via dial up which I still have connected. I am running Trend micro penicllin security software for virus protection. How do I check if there is something blocking connections to NETgear? Any suggestions would be appreciated. Thanks

Posted by on

  • 3 more comments 
  • janette guttmann Apr 14, 2007


    Thankyou for your prompt response

    I am using an adsl modem siemens speedstream 6145.

    here is the information you asked for

    network adapters

    1394 net adapter

    Broadcom802.11b/g WLAN

    Realtek RTL8/39/810 X

    Family Fast Ethernet NIC

    The Dos date from the ipconfig command is:

    Windows IP Configuration

    Host name :janette-laptop
    Primary Dns Suffix :
    Node Type : Broadcast
    IP Routing Enabled : No
    WINS Proxy Enabled : No

    Ethernet adapter Local Area Connection:

    Media State : Media Disconnected
    Description: Realtek RTL8139/810x Family Fast Ethernet NIC

    Physical Address : 00-0F-B0-BC-4A-D4

    Etherenet Adapter Wireless Network Connection:

    Media State : Media Disconnected
    Description : Broadcom 802.11b/g WLAN
    Physical address : 00-14-A5-2B-D4-1D

  • janette guttmann Apr 14, 2007

    Etaf I am not sure how to reply to your post sorry. I have used the comments. I couldn't use the link for netstumbelr 0.4.0 the site has been expired since the 8th April.

  • janette guttmann Apr 14, 2007

    Hi Etaf,

    I have solved my own problem but thanks for your interest. I went back to my isp installation disc and used the advanced troubleshooting tab. I downloaded the drivers for the netgear and the modem and I am now connected and on the internet downloading away. It created a second wireless connection group in control panel under the network connections section.
    Thanks again


  • Anonymous Feb 08, 2009

    Where did you get the drivers from? i have lost the instalation disc and having a right time trying to find the drivers to download

  • Anonymous Mar 22, 2014

    NetGear r6300:
    Can't seem to turn on wifi and / or connect to HP 3050 printer.
    Any help ?



2 Answers

If you need a new battery, I suggest you could purchase one from adapter , which would shipping to you fast and the quality is satisfy satisfied.:)

Posted on May 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 779 Answers

You have a wireless router - correct ? how are you connecting the machines to the internet - please supply details..... i assume the HP laptop - DOES NOT have a built in wirless adapter - which may be conflicting .. have you loaded the driver for the wireless adapter on the HP machine. can you reply with details of the following start> control panel> system> hardware tab> device manager button> network adapters click on the + sign post backs whats there also any ! X or ? ------------- also post an ipconfig /all ipconfig /all TWO Methods to do that - some people have problems with ONE---- ONE --------------------------------- start run cmd ipconfig /all rightclick in the box select all enter control key + C key - to copy then reply here and control key + V to paste TWO ----------------------------------------------- Start, Run, CMD to open a DOS window and type: IPCONFIG /ALL >C:\RESULT.TXT Open C:\RESULT.TXT with Notepad and copy/paste the entire results here. --------------------------------- also download and run this software Free software to check signal strength of wireless is netstumbler 0.4.0 available for download from reply to what it finds

Posted on Apr 12, 2007

  • wayne walker
    wayne walker Apr 14, 2007

    glad you have it fixed now - the netstumbler page works OK - its a very usefull application - you may want to get it anyway

  • wayne walker
    wayne walker Apr 17, 2007

    new links

    Free software to check signal strength of wireless is netstumbler 0.4.0 available for download from







1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The blue light on my wg111v2 in not flashing. is it because i did a system recovery on my pc with the usb plugged in ?

You will need to install the drivers for the wireless adaptor. The flashing blue light simply indicates that there is activity (communications) with a wireless access point.
You can find the drivers for it here;[sku]=WG111v2&download_url=


Jan 07, 2011 | NetGear WG111V2 Wireless Adapter

1 Answer

Cannot connect to my wireless router


You can download driver for windows-7 compatible
(download and install in computer)

If your issue not resolve please revert back to us for further

Thanks for using Fixya

Apr 09, 2010 | NetGear : WG111 54 Mbps Wireless USB 2.0...

1 Answer

My Netgear 54 Mbps WG 111 wireless adaptor briefly connects with my Access Point, but then disconnects as soon as the link is established. This happens intermittently every 3-5 seconds. I've already...

In this case follow the steps:-
a)Try another computer or try all the ports on the same computer.
b)If the problem still presist then try to run the computer on a safe mode and check the connectivty.
c)Upgrade the drivers of the adapter from the netgear website.
Following direct links will be useful as the instuctions of upgrading the drivers are enlisted in there:-
For WG111v1 or WG111(Version 2.1):-
For WG111v2 (Version 3.4.0):-
For WG111v2 (Version 1.5.0):-

Dec 05, 2009 | NetGear : WG111 54 Mbps Wireless USB 2.0...

2 Answers

NETGEAR Wireless G USB Adaptor Problems

I contacted Bigpond after my whole internet collapsed due to my amature abilities in fixing the internet. >_<" yet they fixed my internet connection by disconnecting my current (DLINK DIR-300) router from the network. hmmmm... the technician also confirmed that my current broadband modem (2WIRE 2071-A) isnt capable of supplying a shared connection to more than one computer!! she also directed me towards a modem with an inbuilt wifi router that "supposedly" is the best option right now. (2701HGV-W) I'm a bit shaky and the stupid NETGEAR adaptor problem still exists - im willing to buy the new modem if its guaranteed to abolish this problem and give me a better internet wise outlook - please any suggestions will be appreiciated =)

Apr 23, 2009 | NetGear Wireless-G USB Adapter...

1 Answer

Disconnection problem

have you configure your netgear wg111v2

Oct 02, 2008 | Computers & Internet

1 Answer

HP dv6000 and NetGear WG511T

try other PCMCIA slots...actually there 2 of them in every laptop.

Aug 10, 2008 | NetGear WG511T 108 Mbps Wireless 802.11g/b...

1 Answer

Intermittent connection

Try this support page at The latest version supports Windows Vista.

Uninstall any components previously installed and then install this latest version.

Hope this helps :)

Nov 26, 2007 | NetGear : WG111 54 Mbps Wireless USB 2.0...

1 Answer

Netgear wireless connection

Check the wireless IP address on the XP computer. try to ping default gateway and see whether its giving succesfull reply, after that do ping and check successfull pinging. if it pings successfully the yahoo website , then you should go online.

Oct 24, 2007 | NetGear : WG111 54 Mbps Wireless USB 2.0...

Not finding what you are looking for?
NetGear WG111 802.11g/b Wireless Adapter Logo

Related Topics:

1,000 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18417 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides