Question about Encore Wireless 802.11 Super-G 4 Port Router (ENHWI-SG)

Open Question

Vista laptop pc won't connect to wifi signal

I recently bought an encore wireless router (model name ENHWI-G2).I configured the router properly already and the pc recognizes the signal already. but when I try connecting, it says " windows cannot connect".

I tried connecting to the wireless router with my ipod.It works perfectly.
Is there an installer I need so that vista will recognize the router?Or are there hardware conflicts? My laptop is a toshiba satellite a130.

Thanks.

Posted by on

  • Anonymous Mar 10, 2009

    same problem with Acer Aspire 5050. win vista home premium

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
govinda123
  • 2263 Answers

SOURCE: cannot connect my laptop wlan to encore enhgi-g2 with my pc.

What is the Operating system on the laptop ?
If it is XP then in the bottom right hand corner you will find Wireless network connection ( looks like 1 computer monitor). Use that icon to connect to the wireless network.
If it is windows Vista, then in the bottom right hand corner you will find 2 computer monitor icon. Use that icon to connect to the wireless network.
If it is Windows 98/ME/2000 then use the adapter utility to connect to the wireless network.
For MAC you will see the AIRPORT icon at the top.

Check the wireless settings of the router first . Make sure that you have all the wireless settings of the router. If you are not sure about the settings, then open the router set up and check the settings.

Click Here
for step by step instructions on how to connect to the wireless network and troubleshooting steps

Posted on Dec 15, 2009

Ad
Geekman
  • 32281 Answers

SOURCE: installing encore enhwi-g2 router wuithout cd rom

You can configure the wireless router from unauthorized access by connect a LAN cable from the computer to the router and open a browser and enter the router's configuration URL IP address.
To secure your wireless network from unauthorized access please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Mar 07, 2010

etaf
  • 779 Answers

SOURCE: how do i configure my Encore ENHWI-G2 router?

a user manual is here http://www.encore-usa.com/download/manual/ENHWI-G2_Manual.pdf Power everything off connect the modem to the WAN port on the router - switch on the modem - allow lights to settle switch on the router - allow lights to settle
you can loginto the router and setup according to your ISP instructions you should be able to log onto the ISP website and see what settings are required Often the default settings in a router and connected to a modem will work

Posted on Mar 20, 2010

melvinlpeter
  • 30 Answers

SOURCE: i need an installer for

Hi,
Please Find the below details for Encore 802.11G WIRELESS LAN ROUTER

Posted on Feb 28, 2011

  • 100 Answers

SOURCE: Hello! After pushing reset it is

You will have to press and hold the reset button for at least 30 seconds the router to reset.
<BR><BR> I hope this helps.

Posted on Mar 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to make password for my encore enhwi-g2 wifi


There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Feb 23, 2011 | Encore ENHWI-G2 Router

1 Answer

How do i configure my Encore ENHWI-G2 router?


a user manual is here http://www.encore-usa.com/download/manual/ENHWI-G2_Manual.pdf Power everything off connect the modem to the WAN port on the router - switch on the modem - allow lights to settle switch on the router - allow lights to settle
you can loginto the router and setup according to your ISP instructions you should be able to log onto the ISP website and see what settings are required Often the default settings in a router and connected to a modem will work

Mar 14, 2010 | Encore 802.11G WIRELESS LAN ROUTER...

1 Answer

No internet on PC when cables going through router


Hello there,

You have to start from the beginning and my solution would be:

1) Remove any connections(also don't forget to turn of wifi on your laptop) to router and except the power cord. With the unit powered ON locate the reset pinhole on the back of router.

2) Press and hold reset button for at least 15 secs. then release, wait for 20-30 secs. before the router can completely rebooted.

3) Configure your Computer IP address to “Obtain an IP address automatically” .

4) Connect internet cable to router on port labeled "WAN". Connect PC to any LAN ports available.

5) Now lets configure wireless router. Open any browser you have (IE, Firefox, Chrome, Safari, etc.). On the address bar type: "192.168.1.1" (without quotes). Default username: admin ; default password: admin click "OK".

6) Go through "SETUP WIZARD" until you reach the "Setup WAN Interface" page. On "WAN Access Type:" select "DHCP" then click next.

7) You may configure your "Basic Wireless Settings" to Public or Private until finished configuring.

8) On "Operation Mode" be sure you operate on "Gateway" mode.

That's it! Hope this helps.

Don't forget to vote.

Mar 12, 2010 | Encore ENHWI-G2 Router

1 Answer

Installing encore enhwi-g2 router wuithout cd rom


You can configure the wireless router from unauthorized access by connect a LAN cable from the computer to the router and open a browser and enter the router's configuration URL IP address.
To secure your wireless network from unauthorized access please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Mar 07, 2010 | Encore ENHWI-G2 Router

2 Answers

Encore Wireless Router Wireless connection problem


You need to have a cable connection from the laptop to the router first then go to the router setting by typing something like 192.x.x.x which differs from router to router.This should be available in the manual or in many cases are printed underneath the router.Once you get to the set up page for the router then you can set up the encryption type and create a key which will be needed by the laptop to connect to the network.Hope this helps.

Dec 15, 2009 | Encore ENHWI-G2 Router

1 Answer

Cannot connect my laptop wlan to encore enhgi-g2 with my pc.


What is the Operating system on the laptop ?
If it is XP then in the bottom right hand corner you will find Wireless network connection ( looks like 1 computer monitor). Use that icon to connect to the wireless network.
If it is windows Vista, then in the bottom right hand corner you will find 2 computer monitor icon. Use that icon to connect to the wireless network.
If it is Windows 98/ME/2000 then use the adapter utility to connect to the wireless network.
For MAC you will see the AIRPORT icon at the top.

Check the wireless settings of the router first . Make sure that you have all the wireless settings of the router. If you are not sure about the settings, then open the router set up and check the settings.

Click Here
for step by step instructions on how to connect to the wireless network and troubleshooting steps

Dec 13, 2009 | Encore 802.11G WIRELESS LAN ROUTER...

1 Answer

Can't connect to the internet


Try to disable any firewall you have on your computer like windows firewall or any third party firewalls like zone alarm, norton and mcaffe

May 09, 2009 | Encore 802.11G WIRELESS LAN ROUTER...

2 Answers

Internet connection speed of the Encore ENHWI-G2


if you're router is in the B+G setting, try setting it to the B setting, this is because the wireless adapter in the i-phone/i-touch uses only the B setting, sucks for most part.. but that got my i-phone working like a charm.. hope this helps

Jul 16, 2008 | Encore 802.11G WIRELESS LAN ROUTER...

1 Answer

Please help I can't conect to Router MR814V2 with wireless card Encore ENPWI-G2


Hi,

On Windows XP, the OS will prevent a connection to an unsecured wireless network such as what you have.

You can try:
Double click on the red WiFi icon, click on the "Change the order of preferred networks",  Click on "Add", type in the Network name (SSID) of your router (you can get this by using the connected PC and log in to the NetGear's Webbased Interface), set Network Authentication to "Open", set Data encryption to "Disabled",  OK, reboot your PC.

Alternately, you can set the PC where the Encore ENPWI-G2 card is connected to manual configured settings rather than Auto obtain. Follow what is in the connected PC's settings except that the  last number of the IP add be different (ex. connected PC > 192.168.0.100, set the unconnected PC to 192.168.0.101, all the rest subnet, default dns be the same. Of course the 101 must not be in use, if double IP add, change to 102).

In some instances, you may need to use the Encore WiFi configuration utility (normally comes with the drivers in the installer CD) rather than the Windows buil-in WiFi Config utility,

Hope this be of some help/idea. Post back how things turns up or should you need additional information.

Good luck and kind regards.

Oct 10, 2007 | NetGear MR814 Wireless Router

Not finding what you are looking for?
Encore Wireless 802.11 Super-G 4 Port Router (ENHWI-SG) Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Encore Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Are you an Encore Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...