Question about Sunpak 622 Super Pro TTL Flash

1 Answer

SUNPAK 622 SUPER

Where did you ship your 622 for repair. I think the capacitor is failing. I hear a snap every few seconds when plugged in AC.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

ToCAD America Inc.
53 Green Pond Road
Rockaway, New Jersey 07866, USA

Phone: 973-627-9600
Fax: 973-664-2438
Email: info@tocad.com

$ 111.00 to look and additional for parts and labor. Expensive.
Probably cheaper to buy one off eBay.

Posted on Mar 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Will sunpak 622 flash work with Nikon 5200?


You will need a "Hot shoe to PC connection adapter" to connect the PC sync cord to your camera

Dot Line Nikon Hot Shoe to PC Connection Adapter

Jan 29, 2014 | Sunpak 622 Super Pro TTL Flash

1 Answer

Changing heads How does the 622 flash change its heads


The flash heads just plug into the unit. You slide off the normal head and slide in a different one. The pins also code the GN changes so the display on the back are consistent with the head used.

Oct 23, 2011 | Sunpak 622 Super Pro TTL Flash

1 Answer

Can I get parts for the Sunpak 622?


Tocad the Sunpak distributor in the US does still distribute one of the 622 series,so you might be able to get them repaired or get spare parts. Be aware the voltages and energies available in the flash capacitors are dangerous, so you have to have electronics knowledge/skills to work on them safely. There was an ebay seller who used to sell a scanned vewrsion of the service manual for the 622.

Sep 09, 2011 | Sunpak 622 Super Pro TTL Flash

1 Answer

IS THE VOLTAGE FROM A SUNPAK 622 SUPER SAFE TO USE WITH A NIKON dD 70


I have read reports of this working. To be safe you can cover everything but the center pin with electrical tape, or you can buy surge protectors for flashes to protect your camera.

Mar 03, 2011 | Sunpak 622 Super Pro TTL Flash

1 Answer

I would like to use a sunpak 622 super with a sync connect to the hot shoe. Is the voltage too high for my nikon D 70 DSLR My e -mail is ml1089h@stx.rr.com


According to the list at http://www.botzilla.com/photo/strobeVolts.html , it's your call. The flash's trigger voltage is right on the border. Depending on the individual camera and flash, it may or may not be safe. Personally, I wouldn't risk it without something like the Wein Safe-Sync in between to buffer the current.

Mar 03, 2011 | Sunpak 622 Super Pro TTL Flash

1 Answer

On the 622 pro Sunpak


Sunpak TR-Pak II a NiCad flash battery pack with charger and Quantam battery both has cords for 622.
Personally I have taken out wire pair from removable battery pack of 622 and connected to 4 cells of Nicd type D battery pack made at home.(I placed that in my belt bag).
want more details ,feel free to email at bforbay@gmail.com

Mar 29, 2010 | Sunpak 622 Super Pro TTL Flash

2 Answers

Sunpak 622 Recycle Time w/ Batteries vs AD-26


I had the same problem - 10-11 secs on 240VAC. My solution was to get the Quantum Turbo SC for $450. It yields ~3sec recycle times. This pack for $150 should play nicely as well: http://www.adorama.com/JTMBPN.html?searchinfo=jtl+lancer+battery+pck It was out of stock at the time. The Sunpak TR2000 is $250, but it's Ni-Cd while the others are NiMH. There are other HV packs capable of powering the 622 w/ the fitting cable like Lumedyne IIRC. The AD-26 is still useful for non-action photography. The fastest time I saw posted is 1.5 secs, but it's a DIY job (search 'sunpak 622' on flickr). HTH,
Szilard

May 15, 2009 | Sunpak 622 Super Pro TTL Flash

1 Answer

I have a sunpak 622


Sunpak does not offer dedicated (TTL) module to any digital cameras. The flash can only be used in auto mode, while the camera is set to full manual. The lens has to be stopped down according the working aperture on the flash, correct exposure will be maintained by the built-in sensor of the flash. Fire the flash using a simple hotshoe-to-PC cube if your camera doesn't sport a PC connector. Trigger voltage of the 622 is safe.

Jan 31, 2009 | Sunpak 622 Super Pro TTL Flash

Not finding what you are looking for?
Sunpak 622 Super Pro TTL Flash Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunpak Camera Flashes Experts

kakima

Level 3 Expert

96608 Answers

Doberman

Level 2 Expert

246 Answers

flashman4

Level 2 Expert

76 Answers

Are you a Sunpak Camera Flash Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...