Question about IBM 900SP Phone

1 Answer

No connection between the cordless phone and it base.

Panasonic Head Phone Cordless 900 Mhz.
Dear

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 60 Answers

1. Make sure batteries match and are freshly installed?
Making sure terminals are clean.
2. "Pair" unit with base unit.
3. Check for connectivity, if not successful, trouble shoot with technician for possible cause, or recheck owners manual.
4. IF YOU NEED FUTURE MANUALS FOR ANY APPLIANCE OR TECH STUFF I HIGHLY RECOMMEND THIS WEBSITE:
http://www.manualslib.com
This manualslib is short for manuals library.

Posted on Oct 11, 2016

6 Suggested Answers

SOURCE: cordless phone does not connect

You may need to reset the Telephone Answering System. Complete the following steps to reset the Telephone Answering System:
Step 1: Disconnect the power to the telephone base.

Step 2: Wait a few minutes and then reconnect the power to the telephone base and charger.

Step 3: Set the day and time.

Posted on Apr 03, 2008

  • 3 Answers

SOURCE: AT&T 900 MHZ CORDLESS PHONE #9350

AT&T discontinued production of this phone on Sept 4, 1999.

This website lists manuals for AT&T cordless phones but the #9350 does not seem to be listed.

http://telephones.att.com/telephones_ui/support/dsp_manuals_list.cfm

Infact I cannot seem to find any manual pre 1/1/2001, but if you do find one please let me know, my grandma wants a copy of the manual.

-L

P.S. What problem are you having? We can't seem to get hers to to record messages even though the announcement, time & date are set and the answering machine is turned on.

Posted on Dec 31, 2007

leroyal
  • 2120 Answers

SOURCE: How to link 3 same model cordless phones to one base

Only if you have 2 phone lines.

Posted on Nov 06, 2008

  • 2 Answers

SOURCE: IBM 3900 cordless phone with new battery -

You need to register the base and handset... Here is how to do it:

Press and hold the "CH" button on the right side of the handset and the press and hold the "Page/Find" button on the base.... The handset should say "Registered" in a few seconds

Posted on Mar 15, 2009

  • 2 Answers

SOURCE: Please Help!!!

You need to register the base and handset... Here is how to do it:

Press and hold the "CH" button on the right side of the handset and the press and hold the "Page/Find" button on the base.... The handset should say "Registered" in a few seconds

Posted on Mar 15, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost manual need to know how to put message on


Please mention the model number of the phone so that we can guide you.
Assuming your phone is the cordless type please check this link for the manual for the 900 MHz version.

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Telephones/900-MHz-Phones/Operating-Instructions/model.KX-TC1486B.O#ts

If this is the cellphone please check the link below;

Panasonic Phones manuals

Apr 19, 2011 | Panasonic Lands Phones

Tip

Sir, what is wrong with my vtech cordless phones, im always getting this...


If you're having problems with clicking, like the edges are hard to click, or the screen in general is hard to click, the following is how to remedy it.
Tools:
  • Torx T6 screw driver
  • Small needle
Steps to follow:
  • Take off back cover
  • Locate red sticker (water detection sticker)
  • There is a t6 screw under the sticker and directly across from it
  • The problem is that sometimes these screws are too tight
  • Start by loosening the exposed screw a tiny bit, then check the clicking on the screen - if this doesn't work, loosen a little more. If the clicking still doesn't work correctly, move on to next step
  • Remove the sticker with the small needle (this will not void your warranty) - loosen the screw as you did with the first screw -
  • Check the clicking to see if it works better - if not loosen screws more
  • Replace the sticker
  • Replace back cover
Your screen should now be clicking better. Thanks

on Aug 03, 2010 | Panasonic 900 MHz Cordless Phone

1 Answer

My Sony SPP-930 cordless phone is about 15 years old. Just recently it stopped working. The base lights work fine but when I lift the handset off the base and press TALK, all I get is 4 beeps. I bought a...


The problem is in the main base, the cordless phone is unable to communicate with the base because it has stopped working that is why you are getting the four beeps. It is more cost effective to replace the complete phone system than repair. The only other possibility "and it is long short" unplug the power and the phone line cord from the wall and let it sit at least 30 minutes, this might reset the processor ic and get your system working again.

Jan 07, 2011 | Sony SPP-930 900 MHz Analog Cordless Phone

1 Answer

Uniden 900 MHz EXS 9110 is dead


Sound to me like you just need to replace the battery pack. Radio shack is a great place for phone batteries. If not, try www.batteriesplus.com
Good luck.

Apr 16, 2009 | Uniden EXS2060 Digital Spread Spectrum 900...

1 Answer

Phone Manuel


Download the user guide from one of the two websites below:


900 MHz UG.book

900 MHz User Guide.book

Mar 03, 2009 | Panasonic 900 MHz Cordless Phone

1 Answer

NEC 900 MHz cordless phone


ok wait! ill send to you the information settings!

Thanks!

Jul 19, 2008 | Computers & Internet

2 Answers

RCA 900 MHz Accessory Handset- H5400RE3 for 4-line systems 25413RE3, 25414RE3 & 25415RE3


Donna75603,
Go near the base of the corded phone to register your cordless phone. Press "menu" on your cordless phone and press arrow key till you see "Registration". Press "Select" key. The sreen will show "Yes" and "No" sign. Press arrow key once to select "Yes" then press "Select" key. The sreeen will show "Registerring.." , at this time press "Page" key on the corded or base phone and hold it for a few seconds until you hear a beeping sound. This is the sign the the phones are syncronized. You can now use your cordless phone.

Jun
Brooklyn

May 14, 2008 | RCA Lands Phones

2 Answers

GE cordless 900 mHz


I cannot receive my messages...help please

Mar 08, 2008 | Uniden Cordless Phone

1 Answer

Range extender for cordless phone


Ours behave similarly. The solution is to position the "base" (one connected to the phone lkine physically) in the center of the home so that the limited range can reach the remote phones at the periphery.
These phones operate at 1.9GHz. At that microwave frequency radio signals do not penetrate walls and floors very well. 2.4 GHz phones suffer increased "path loss" and are no better. The solution for any of these microwave phones is more transmitter power, which is illegal.
900 mHz phones actually work better because at 900 MHz nature offers less signal path loss", but try to find them in stores! For the same transmitter power level a 900MHz phones will have noticeably greater range.
The 1.9GHz D.E.C.T. phones also operate differently from other types of cordless phones and I believe that also contributes to dropped calls and the phone's inability to ring when a call arrives. At the fringe of its range you can see how it struggles to establish a link. Once established it will work well and then simply drop the call when you least expect. I am not a fan of the DECT phones, but they do not interfere with 2.4 GHz wireless routers, etc.

Jan 02, 2008 | Panasonic KX-TGA101S Cordless Handset

Not finding what you are looking for?
IBM 900SP Phone Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Pat Burton
Pat Burton

Level 1 Expert

60 Answers

peter parker
peter parker

Level 1 Expert

15 Answers

Are you an IBM Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...