Question about Whirlpool Estate TAWS750PQ 27-Inch Washer

1 Answer

Estate washer, new, water will not stop, overflowing

My washer is only 5 months old. Went to wash a load and it just kept filling with water and would not stop. Overflowed all over floor and only turning off water lines would stop it. Now when turn on water lines, keeps filling without even washer turned on.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 179 Answers

You need to replace the inlet valve something is stuck in the valve not allowing it to shut.

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water will not stop when I shut the washer off.


Possible that the inlet valve has failed and so does not cut off even after the power to the unit or the control unit has been disconnected.

Aug 03, 2012 | Kenmore Washing Machines

1 Answer

Water dose ot stop when washer is full. It continues to run.


If you disconnected power and water still flowed, replace the water valve. If water stopped flowing when power was disconnected, clean out tube from tub to water level switch.

Jun 07, 2009 | GE WDSR2080D Top Load Washer

1 Answer

My etw4300tq0 washer will fill up with water, then stops.


etw4300tq0
Same problem... any help out there I see this post is over a yr old... it is now dec 29, 2010 and I have the same problem.

Mar 23, 2009 | Estate ETW4400VQ Top Load Washer

2 Answers

My washer will not stop filling with water and overflows


Turn the washer on and let the water run, while the water is running unplug the power cord if the water stops the inlet valve is ok but if still running the valve is bad and need to be replace if the pump is good you need to test the water level switch, if faulty need to replace.
good luck

Mar 17, 2009 | Whirlpool Estate TAWS750PQ 27-Inch Washer

2 Answers

Kenmore 80 series washer doesn't stop filling up with water


Almost went and bought a switch until I widened by search for "kenmore washer 80 series overflow" and came up with this:
http://www.fixya.com/support/t1206464-kenmore_80_series_overflow

Turns out that a couple weeks ago, I had a really unbalanced load that probably shook off the tubing. Anyhow, saved me a trip to the supply store AND cost. Thanks to the original poster!

Feb 11, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Water doesn't stop filling tub in washer, water overflows everywhere. washer doesn't wash on super/large loads and doesn't spin on any loads. washer is only 2 years old


water not stopping filling is the pressure switch its a long thin tube that goes from the bottom of drum to the front top about the thickness of a pencil this needs taking off clearing through and checking for pin holes then refitting this should solve water problem

Jun 19, 2008 | Washing Machines

1 Answer

Estate washer stopped after filling with water


will any of the lights come on when you try to turn on a cycle?

Nov 21, 2007 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...