Question about Zebra LP 2844-Z Thermal Label Printer
What kind of problem are you having?
If you need the user guide , it can be downloaded from this link.
Just select your model and language.
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Posted on Apr 05, 2009
SOURCE: Zebra LP 2844 prints blanks
In addition to jigeo solution you need to know this, the little taken- sense button must be in the off position before this procedure works. You can then return it to the on position.
Posted on Sep 08, 2008
Look at the stocks tab in the driver. There is an area in your print driver to adjust the width/height of the kind of label you are trying to use.
Posted on Apr 23, 2009
Are you sure that the page size is wrong, or are you just guessing because of the way that the label is printing? I would uninstall the driver - delete the printer from printers and faxes and remove the driver from Server Properties (in the file drop down in Printers and Faxes). Go to ups.zebra.com/ctp and get the latest driver - you have to have the UPS version of the driver in order to support pass-through printing. Go into your UPS Ship Asst application and make sure that the generic thermal is not checked.
Posted on Jan 31, 2010
in the pop up window go to
SELECT THE MFC5440 DRIVER AND REMOVE
SELEST THE LP 2844 DRIVER AND REMOVE
Now go to www.seagullscientific.com and download the Zebra driver pack, once downloaded run it and install the Zebra Lp2844 to with the USb port.
This should solve the problem, if not please come back.
Posted on Feb 16, 2010
Maybe the printer is not getting a good calibration on the label. If the status LED is a steady RED when trying to print, then the printer thinks its out of labels. A manual calibrationi could solve that.
1. Turn the printer off
2. press and hold down the FEED key while turning on the printer.
3. keep pressing the key until the status light flashes once, then let go
4. The printer will auto-calibrate for the size of label and then should be ready to use.
Press FEED once after its done and 1 label should feed.
Hope that helps !
Posted on Apr 12, 2010
Tips for a great answer:
May 01, 2014 | Zebra LP 2844 Thermal Printer
Jul 21, 2010 | Zebra LP 2844 Thermal Printer
Apr 06, 2010 | Zebra LP 2844 Thermal Printer
Mar 10, 2010 | Zebra LP 2844 Thermal Printer
Feb 18, 2010 | Zebra LP 2844 Thermal Printer
Feb 15, 2010 | Zebra LP 2844 Thermal Printer
Nov 12, 2009 | Zebra LP 2844-Z Thermal Label Printer
Jul 17, 2014 | Zebra LP 2844-Z Thermal Label Printer
250 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: