Question about Insignia IS-LCDTV32 32 in. Television

2 Answers

Cannot get a picture

We are trying to connect the cable straight to the this TV not using any box as we have the straight cable connection with no premiums - we cannot get a picture - is it not possible with TV?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,285 Answers

The incoming cable is live...yes ... plug it to tv... then you need to configure the tv.. go to menu/ is this air/video or CABLE... is to be selected... then go to auto channel scan...(this will find all the ch except for premium ch... note some tv if you choose ch 0 or 00 (zero) premium channel slips in ...)

Posted on Aug 13, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Go into menu and change source from antenna to cable

Posted on Apr 26, 2009

4 Suggested Answers

ripleymojica
  • 643 Answers

SOURCE: Insignia 42 LCD TV Blurry Picture. Computer

tuner is going bad use a cable box that has hdmi or component video to bypass the tvx tuner

Posted on Jul 02, 2009

  • 8457 Answers

SOURCE: Cable picture is fuzzy

Ur standard DTV signal picture ok?Not than ur Main Tuner signal board is dead.Must replaced the Tuner signal board.

Posted on Apr 05, 2010

  • 29 Answers

SOURCE: no hd picture

This is a known fault on this panel and the samsung.
replacing the separate hd tuning block that connects to the main board will fix this problem.

Posted on May 23, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect my wii to a cable box with my Emerson TV?


You cannot connect wii to a cable box. You have to connect your wii straight to the TV using the red, white and yellow connection cables that came with wii. If your TV is older and only has a coax cable connection then you need a rf modulator

Feb 09, 2015 | Emerson Televison & Video

1 Answer

TV fell and now only have black and white picture No color.


if you were using a straight coax connection you might want to try HDMI, on a Cable or sat box or if you are using component connections make sure they're all color coordinated. just because one input may be damaged doesn't mean other inputs are damaged try using a Blu ray player you know is good, checking different types of connectors and different inputs. If you get the same results off all inputs then the tv has sustained damage, might want to check prices at Walmart cuz it ain't gonna be worth it to have it fixed

May 19, 2014 | Vizio L37 Television

1 Answer

I have picture but no sound. We just had our surround sound system go out and are trying to run our tv on it's own internal speaker system. How do you hook it to our direct tv hd box


Hi.

You need to use audio cables. Connect two red and white audio cables from the output on the HD box to the relative input at the back of TV (nr.4 in picture below). The best way to connect the HD box is by using component cables, that are the red-green and blue trio of cables, plus a white and red audio cables.

Here what you need:

Three plus two:
Component Video Cable
Audio Red / White Cable

or single set of five:
Cables Unlimited - Video / audio cable

Once you have the five cables, connect them to the output at the back of the Direct TV box, and then connect the other end of the cable to either group of connectors 6, or to one of the columns in connector 7. Do connection with box and TV power off. After re-applying power use the source-input selector on remote to select the source from Direct TV box.

ginko_162.gif

May 24, 2011 | Samsung HCM4215W 42" Rear Projection...

1 Answer

I have a sony EX4|40 with built in Freeview. However, the port on the tv is a UHF (?) port (Im not technically minded, my port names may be wrong so I hope you know what I mean), The cable which runs from...


xtreamz_69,

It sounds like you connected the coax cable to your TV. What channel is the TV set on when you have the Freeview connected? Because you are using a coax cable, the TV should be set to either channel 3 or 4 (normally channel 3). Check to make sure your TV is on one of those channels. Also verify your receiver is on. Your TV has the several other type ports (HDMI, component, composite) as alternatives to pick up your picture. If you have any other questions, please post to this site.

Ray Calo
DISH Network

Jan 19, 2011 | DISH Network IR Remote Control

2 Answers

I turn on the Tv the sound comes on & the picture is blank Cablevision was here & said it's a problem in the set


He is probably not an expert (just kidding, of course he's not..) First, try connecting the Cablevision Box to another TV (if you don't have another HD TV, use the yellow/white/red Composite connection.) If there is still no picture, the box is no good. If there is, then try a different output from the Box or other inputs on the TV. Are you using HDMI (HD connection) out of your Box? Is the TV 720p or 1080p? Set the Box up (from the menu) according to the specs of your TV. Hope I helped.

Jan 11, 2011 | Samsung Televison & Video

1 Answer

LCD TV IS CONNECTED TO CABLE USING SATELITE. CABLE IS RUN APPROX 150 FT FROM SAT DISH TO TV. RECEPTION IS VERY GRAINY,,,IS IT THE LENGTH OF CABLE? THE CABLE IS 100FT CONNECTED TO 50FT CONNECTED TO TV....


Is the satellite receiver HD or standard?
If it is standard you should hook up the box to the tv via RCA cables (Yellow/Red/White) and this will help with the picture quality.

If it is a HD receiver then hook up the box to the tv using a component video cable and this will drastically change the quality of the picture.

Using a coax cable to attach from the box to the tv essentially is connecting an analog signal to the tv and this will produce a lower quality picture...

Good Luck!!

Jan 02, 2010 | Samsung LN32B360 32 in. LCD HDTV

1 Answer

I am trying to use my Denon AVR-1802 to connect my cable box to my TV. The problem is that I don't have any speakers connected to the 1802, I just want to route the cable box's video and audio to the TV...


connect your analog output from the cablebox to the receiver md/tape in. then connect your tv audio input to the md/tape out of the receiver. or you could just pass it straight from the box to the tv, bypassing the receiver altogether.

Nov 03, 2009 | Denon AVR-1802 Receiver

1 Answer

Am setting up a bose GSX 3-2-1 home theater


simplist solution, if the TV has an audio output just run that to the Bose system.
what type of TV are you connecting to?
Is the cable box an HD or digital box?

Jun 23, 2008 | Bose Cinemate Digital Home Theater System...

1 Answer

Can't get picture after connecting to receiver nad speakers


Sounds like something got confused in the re-wiring...if the TV signal from cable doesn't involve a box, then the co-ax should go straight to the "cable in" or "RF in" on the TV, and the sound equipment gets connected to output ports on the TV. Otherwise, try bypassing the video connections on receiver or whatever and go directly to TV...My surround sound has video in and out, but I've never used them, it doesn't matter.

Feb 11, 2008 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

Panasonic legacy connection


s-video is a legacy connection. legacy means obsolete and this will impare your image.

what you should do is connect the cable box and blue ray directly to tv with hdmi cable, then run audio cables back to the reciever from these devices. the vcr and regular dvd player would be routed through the reciever the conventional way. you would have to change the inputs on the tv between the cable box, and blue ray if u have one, and a seperate single tv imput for components running thru the stereo. you would have to use the reciever to select between audio sources, and the video sources between the vcr and dvd only.

Nov 04, 2007 | Panasonic TH-50PHD8UK 50 in. Plasma...

Not finding what you are looking for?
Insignia IS-LCDTV32 32 in. Television Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Cindy Wells

Level 3 Expert

4810 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...