Question about Alpine CDA-9847 CD Player

1 Answer

CD Error When ever i insert a cd it acts like its going to load then it just flashes "ERROR", ive tried putting a cleaning CD in and it still does!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: CD Error

It sounds like it is the laser is gone bad or need a good cleaning if you smoke the ashes can get in the slot were you put the cd and clog the laser.

Posted on Jul 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

CD player displays error code: ER-1

The ER-1 code signifies an unknown error. Try cleaning the player itself, as well as cleaning the individual CD's prior to inserting them.

If that doesn't remedy the issue, ask for further help.

Feb 02, 2014 | Dual Electronics XD1222 Car USB Player

1 Answer


E-04 errors are usually a 'no CD is loaded' problem. Your CD is too dirty or scratched to be read properly, or upside down. Clean/polish your CD, and reload properly.

Jun 27, 2011 | Kenwood Sirius KDC-MP225 CD Player

1 Answer

When cd isinserted it does not start to play but show E-1 on screen

E1 = Disk is dirty, or is upside down. A disk has data other than CD-DA, MP3, or WMA has been loaded.

I'd try some other CD's, and if that doesn't work, I'd try one of those cheap CD lens cleaning kits. Try re-setting the whole deck (disconnected power).

If you receive an error reading or the cd ejects automatically briefly after being inserted, the headunit needs to be repaired or replaced.

Good luck.

Apr 12, 2011 | Panasonic CQ-DFX202 CD Player

1 Answer

Error code 11- help-

Error 11 is a disc read error.
1. The disc is not clean or inserted upside down
2. If not the lens is dirty
3. Mechanical error fault. Issue with the mechanics that loads the cd into the spindle motor.

Hope this helps
Positive Feedback ALWAYS Appreciated :)

Mar 06, 2011 | Pioneer DEH-1300 CD Player

1 Answer

I get the TOC Error, when I put bought cds in.

don't think you will like this answer but, it probably time to get a new cd player... you could try using a cd cleaner designed to clean the laser or spray the insides with compressed air.

Apr 29, 2010 | Kenwood KDC-MP228 CD Player

1 Answer

When i put a cd in my DRX7575z cd player it comes up with error 6 i have radio function but no cd

Error 6 means your laser isn't reading disc. Needs replaced pick up laser. I would try first to insert a clean up CD, and test your Cd player with an original CD, if the problem persist, you have to go to fix it to a specialist.

Sep 23, 2009 | Clarion DRX7575z CD Player

3 Answers

Eurovox 'Maestro Series' 10 stacker displaying 'E-99'

CD Changers
The disc magazine is not inserted in the cd changer
No disc is inserted in the disc magazine
The disc is dirty, or the disc is inserted into the disc magazine
upside down
Remove CD magazine by pressing eject button on changer.
Remove all discs from magazine and re-load empty magazine into
changer. Using the Radio RESET CD system by pressing and
holding the “ON”/”POWER” button for about ten seconds, or in
earlier models the “EJECT/6” button.

FM/RF Remote Controls
Remove disc magazine from changer by pressing eject button.
Remove all discs from magazine and re-load empty magazine into
changer. Press RESET button on interface unit
The temperature is exceeding more than 55c(130f) and the cd
changer cannot be operated. When the cd changer cools off, this
wait disappears. When the RESET button on the interface unit is
pressed, this WAIT appears for a few seconds.


Jun 21, 2009 | iLO CA3000V CD Player

1 Answer

Cleaning cd player on my JVC KD-S570

Laser Lens Cleaner. Looks like a regular CD, but it uses soft brushes that clean the lens. The better quality ones use fluid as well. You can find them in just about every retail store that sells CD's/DVD's or electronics. Chances are your transport has a problem or the lens is out of align. There is no fix for this, they just put a new transport in the unit it's less expensive. Hope this helps

Jun 10, 2009 | JVC KD-S570 CD Player

1 Answer

Rpd 552 cd reader problem

Message Possible cause Recommended action
E-01 Dirty disc. Clean the disc.
Scratched disc. Replace the disc.
Up-side-down. Check the disc.
E-02 Focus error. Try ejecting and re-inserting
under normal temperature
E-03 Data and focus error. Under normal temperature
conditions, eject and
insert clean, undamaged
disc properly.
E-04 Mechanical problem. Eject and re-insert.

Oct 17, 2007 | Blaupunkt RPD 552 CD Player

1 Answer

Brand New Unit Will Not Accept ANY Type of CD

I am having the same problem but only with a KDC-MP335 unit. I installed it in a 1995 Jeep Grand Cherokee to the stock system, pretty easy install just matching colors for wires and everything works (Radio). but not one CD plays. it says reading and it acts as if it is playing the tracks but no sound... what is going on? did I mess up wiring it or something?

Oct 03, 2006 | Kenwood KDC-X890 CD Player

Not finding what you are looking for?
Alpine CDA-9847 CD Player Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4681 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Alpine Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides